From my experience this machine shop is a cylinder head only machine shop. But it's exactly what I…read moreneed for my projects. I brought a few pieces over here and they give good deals and quick turnaround. Be sure to strip down your head so that they could do the work that need to do and not charge you extra.

Super fast turn around time and quality work! When you walk inside you know it's their profession…read more I brought my rare Mercedes' c36 amg head to get resurfaced and they also did my valve seals.

Just had cylinder head repaired for my 2008 Scion and it worked great thank you Le Machine…read more Received call when it was ready.

We use to go to Lonnie Jensen for all machine shop work , but since closing Lynns machine shop has…read moreperformed perfectly

Excellent quality and service. The job was a very small one. Fusion Welding got it done in record…read moretime, and the work was perfect! These guys are top notch professionals.

Someone bumped into my metal fence and didn't leave a note. I reached out to Fusion Welding and…read moreAlbert stopped by to provide a quote. He explained what he would need to do and provided an estimate. We agreed on a price and he went to get the needed materials. After a couple of hours, he was done repairing and replacing the damaged portions of my fence. The fence looks amazing again. I hope I won't need to reach out to him in the future for any work, but if for some reason I have a need, I would not hesitate to reach out to him again.

Nice guy, Fast Work, Sloppy shop…read more I had some head work done here earlier this year for a Nissan SR20DE-T and after receiving my head back there was enough issues with it that I wouldn't recommend going back. I came to have my head resurfaced, cleaned & finally for installation of new valve seals with BC springs & retainers. Mike was friendly & upon inspection of my head he recommended new guides, so I brought him some the next week no problem as I did with the other parts to help streamline the process. However after I received my head back from the shop & inspected it at home I noticed a few problems with it & I'm disappointed. I'll start with the more minor issues and end with the bigger ones. 1st issue being paint over-spray, personally I don't want my head to be spray painted at all but that's my fault & I should have clarified. The paint work is done fine & it does look bright like aluminum but there was built up over-spray and residue on the head surface that had to be cleaned off with a plastic razor blade thoroughly. 2nd Issue is one of the valve keepers wasn't installed fully & a separate valve keeper had a piece of metal wire stuck in it (Like from a wire wheel). Annoying, but not that big of a deal to me as I have the tools to fix the two messed up keepers. 3rd issue, & the biggest issue of all is that the head kept dropping metal shavings out of it, as It was not cleaned properly after being resurfaced. At this point I had to have the head disassembled completely to clean it all out & be rebuilt.. If someone wasn't as mechanically inclined & somehow managed to install this head it would have ended in complete engine failure. Overall, staff seems fine. Fast work, maybe a little too fast as this shop needs better quality control.

Mike and his team rebuilt my chevy 350 on my K5 Blazer. I've been driving it everyday still…read morebreaking it in. I put about 1000 miles on it. But so far its been driving flawless! Highly recommend MVM Mechanical for anything mechanical. He does body work and paint jobs as well. Very honest guy.

Highly recommend Jay, very knowledgeable and provided excellent customer service. Came in to get my…read moreflywheel resurfaced for $120, and it was ready the next day.

I needed some brake rotors matched for a custom job. Spoke to jay told him what i needed. The…read morefinished product is an exact match i recommend him for your machine work. Good price and quick turnaround

Thank you Nick for doing my small job, your awesome. When I need more work done, I'll be back.read more

I had a 1945 kicker cover for my Harley Davidson that I damaged. Unsure if the job was too small…read morefor his shop, I went to Nick not knowing what to expect. Nick greeted me with a fantastic attitude and enthusiasm. He explained what needed to be done and assured me he had the best welders. A few days later, I got a call that my part was fixed. Nick is very helpful and has great work ethics. I will definitely be returning.

I had a special project that needed an expert machinist to work on and Jesus was extremely helpful…read more He was very attentive and completed the required work very efficiently. I would not hesitate to go to them again as they are extremely knowledgeable and helpful. Kudos to Jesus!!!

Highly recommended: fantastic pricing on my project involving a cylindrical piece of aluminum. Jose…read moreis diligent, he thinks things through, and is very professional - Thanks Jose!

If you're looking for welding or similar metalwork, your search is over. Go here…read more I recently bought an old steel bike frame with a very poor repair to one of the joints: there was barely any metal holding the joint together, and there was a hole melted in one of the tubes. I was concerned that it'd be hard to get the joint properly repaired, and/or prohibitively expensive. I stopped by Custom Metal Manufacturing around opening time. The workshop is a treasure trove: minibikes, custom signs, and sculptures everywhere. Ed and Gerard were super friendly and great storytellers. Ed looked at the frame, said "I can fix that", and fired up his welding gear right away. Ten minutes of good conversation later the work was done, and at a very reasonable price. The joint is now reinforced with ample steel, and the hole is closed up. Everything I hoped for and more.

A shoutout to CMM. I decided to drive over with an item that needed welding. They were able to…read morecomplete the job right away. Friendly service at a competitive price (another company was 4x more expensive and said it would take a few days). If you need some welding, call or visit them. You will not be disappointed.

Tony & Greg have been taking care of my old school for a long time now, they have been great to…read morework with and it's been cool seeing this business grow and thrive. It's nice to see people take their business and passion seriously and want to do the best in their industry and it really shows with working with FFR.

Had my 1963 Dodge 318 Poly engine, NP 201 transfer case and NP 420 transmission done here and…read moreeverything turned out perfect. They picked up and delivered to me. Was very happy with the service, communication and price. Definitely five star. Best of all, no leaks.

if I could give zero start I would. the staff is very rude. They do unauthorized work, lie to your…read moreface and charge you more money for it!! TAKE YOUR BUSINESS ELSE WHERE!!! They also bought all of their positive reviews to keep their sorry "business" afloat. DONT GET SCAMMED!!!

Excellent,caring shop the caters to my demands to take care of my classic car like it was their…read moreown. They are willing to go the extra mile to fix something under the hood that wasn't on the "fix it" list, by calling first and suggesting part X should be handled, as well. With professional explanations, I understand, agree and get my car back in perfect running order. That means everything to me: my car is reliable on a long drive, tuned and runs great. I've also had transmission work done, dashboard disassembled and speedometer worked on, and general maintenance. Thanks to Vic and his mechanics for everything! Happy customer!