Miracle Fix: Jose and Lorenzo Saved My Miata. Answer to my…read moreprayers. Expert welders and fabricators. My Mazda developed a loud rattling and knocking noise underneath and no one could figure out why. I went to eight different shops. Each one gave me a different guess: heat shields, engine mounts, catalytic converter, "play in the differential," you name it. Nothing made sense, and the noise was so annoying at red lights and/or with foot on the brake . Finally, one honest shop (Thanh Auto in Garden Grove) spotted the real culprit: a big clean crack in the aluminum mounting bracket attached to the differential housing. Every mechanic I spoke with afterward told me the same thing: "Only solution is to drop the entire differential and replace it." Translation: very expensive. Thanh's expert ( Keith) suggested welding the crack, but every welding shop I contacted said the same thing -- "No space. We'd have to remove the differential before welding. Almost as costly as replacing the whole diff." Then I found Jose at OC Fabrication on Yelp. Within minutes of sending him a photo, he replied ...fast, professional, and confident. He said it might be doable without removing the diff, but he needed to inspect in person. He even gave me two honest estimates: a higher price if the diff needed to come out, and a much lower one if he could reach it in place. He squeezed me in after hours the very next day. He and his welder Lorenzo crawled under the car, inspected the crack, and confirmed they could do it without removing anything. They carefully jacked the differential to realign the broken ear, cleaned the aluminum, welded it beautifully, and then reinforced it with additional metal. All in under 90 minutes. When we test drove the car afterward -- night and day. Smooth. Quiet. Solid. The rattling and knocking that haunted me for a weeek? Gone. Jose told me straight: most shops wouldn't even attempt this kind of repair. But he and Lorenzo took it on with skill, confidence, pride in their craft, and real customer care. They solved a problem that eight other shops shrugged at. I can't recommend these guys enough. Professional, talented, honest, and genuinely passionate about their work. Bravo, Jose and Lorenzo. Many thanks. Bonus: Their shop is amazing -- full of unique custom fabrication projects, metalwork, and creative builds. Kudos for their skill and craftsmanship and care.

Super friendly, fast response time, professional, and did great work. Highly recommend!read more

What I can say is Carlos at Reyes ornamental iron has done a fantastic job! He built and installed…read morean iron gate at a Laguna Niguel home of my client. He is detailed and very knowledgeable about what needs to be done. My client is very satisfied, this is the company you want to use! Tony- Quarterback Construction.

Called Carlos to get an estimate for an iron railing. He arrived on time and assessed the…read moresituation. He gave me his professional opinion about improving work done before installing a railing. I really appreciated his effort and courtesy advising me to be happier in the long run before installing the railing. I appreciate his time and will definitely call him for any iron work. He has many years experience in his craft and he is also very informative and patient with clients. Thank you Carlos!

Amazing. No other business wanted to help me straighten a brass shaft. Contact Ernesto, brought it…read morein and he did it right there and then for a reasonable price too. Thank you.

Ernesto is the BEST! My son's Super 73 e-bike frame had a major crack. Super 73s option was a new…read morebike or frame and that's not in the budget. We called Ernesto and sent pictures of the damaged frame and he said he could definitely help us repair the frame. In fact, we called on a Thursday night after hours and he answered all our questions (I was just going to leave a VM for next day). Ernesto was communicative re: our project throughout the process. We dropped the bike off and repair was done same day. My son's frame is fixed and stronger than ever. He's ready to ride again thanks to Superior Welding and Ernesto!

I needed to repair a gate that rusted and broke at the base and Juan came out the same day and gave…read moreme the option to repair or replace the gate. I opted for repairing. He even painted, added latches, and reinforced it so it would be totally secure for my insane parkouring pittie. While he was here I asked about another gate that was giving me trouble (because it was done by some hack who is no longer on yelp) and he pointed out all the places that needed addressing. He took the whole gate down, reworked it, created a new panel, painted and reinforced the hell out of it so I wouldn't run into the same issues again. Juan is quality and customer service oriented and his work shows it.

Cruz Ornamentals did a great job of a Juliet Faux Deck. They were able to get it done quickly in…read moreorder for us to close the sale of a home. I was representing the seller, and we had a very short window to handle it. They were very professional and did a wonderful job!

I couldn't be happier with the work Elevate Metal Co did in my home. From start to finish, the…read moreentire process was professional, smooth, and detail-oriented. They transformed multiple areas of my house with their custom metalwork. (see pictures below) If you're looking for a company that delivers high-quality custom metalwork with both beauty and durability, I can't recommend them enough. They truly live up to their name.

They recently installed new handrails in my stairwell, and they did an amazing job. Great…read morecommunication and quality work. I would definitely recommend the to friends and family!

I needed some custom welding work done on my bow fishing boat and Johnny came through with flying…read morecolors. Solid work with a reasonable price tag. If you're looking for a welder you can trust then stop looking - you just found him.

Johnny came out quickly and welded an apparently seamless addition to our metal framed gate. He…read moredid it on the spot. Well worth the modest price.

I've been dealing with Adam and the rest of the team at Unique over seven years and I've never been…read morelet down. From long projects to last minute pieces, I have never missed a deadline with their help. No matter what I've thrown at them, they've ALWAYS been able to deliver.

Had Dustin fix my broken swim step bracket for my wakeboard boat. I left the design open to him. He…read moretook it upon himself to research it and knocked it out of the park. The welds look like straight up weld porn too haha. It was done quickly and for a fair price. Will be taking all my stuff here

Jim does incredible work. His railings and metal fabrication are truly next level--clean, precise,…read moreand built to last. I reached out to multiple companies, and he was by far the most proactive and professional, which instantly gave me confidence I was choosing the right person. I'm very glad I trusted my instincts because the finished product is outstanding. He made the entire process easy, stayed responsive the whole time, and delivered quality that speaks for itself. Highly recommend. Thank you, Jim--I'll be referring people to you 100%.

These guys are great. Jim drilled a small hole through a steel tiller extension and spared me a…read morebig headache. While I was waiting I saw a very nice steel stair & handrail that they were working on...super clean work!

We purchased a house that previous owner installed a doors from Naddour's sister company Baltic…read moreIron Doors and about it's about 16+ feet tall. Very nice doors that are about 11-12 years old, but the double-door's lower locking pin broke and I could only open one side of the double doors. I got in touch with Jordan at Naddour's Custom Metalworks to find out about getting it repaired. She spoke with their manager at their manufacturing center and discovered the same parts used with the older door were no longer available. The good news was updated parts were available at a very reasonable price. They would have to just slightly modified for our older door. Great! I booked the repair appointment ASAP and Edgar came from the factory to do the repairs. He showed up at the house and was very nice and professional. He got to work quickly with removing the old parts and installing the new ones. Thankfully, this repair could be done without removing one side or both of the iron doors. He modified the parts,installed them within a little over 2 hours, the repairs were completed. Both doors open and close tightly again. I'm planning on buying an extra set of top and bottom latches for the door, in case I need them later on or the next owner needs them in the future. It was great working with Jordan, Edgar and Carlo at Naddour's Custom Metalworks. Everyone was really friendly, professional and very helpful with getting the doors fixed as soon as possible. If we wanted to put iron doors on our next house, I would definitely call this company to purchase them. 5 Stars for the great customer service!

I purchased one custom iron double door, two custom steel pedestrian gates in 2023, and one custom…read morepedestrian gate in 2025. The quality of the door and gates was excellent. However, the masonry wall which the 3rd gate was attached to began to move after the gate was installed. Therefore, it was necessary to demo the existing masonry wall and construct a new wall. I contacted Naddour's after the new wall was completed requesting that they confirm a date and time when they could install the gate. I called twice and also texted but never received a return call. I was able to contact another gate company who agreed to install the gate. I am very disappointed in Naddour's as I paid $19,021 for the door and gates and was willing to pay for installation of the gate to the new wall.

I was totally satisfied and impressed by this company from the time I first spoke with Jeff and…read morethroughout the project. I installed a handrail on my front porch, which they did not treat as too small a job. The workers came, were courteous, and did a great job. We've had our share of poor contractors' shoddy work. So this company was so refreshing to work with. Thank you Jeff, Gloria and your installers.

Horrible initial experience, contacted Christ Argon with a fairly easy to make metal working audio…read morehi fi rack request, sent him a drawing of what I was thinking, he kept ignoring my emails, I also texted him he responded initially and then totally ghosted me. Really unprofessional and rude. Would never do work with Hand crafted metalworks again. Scam.