Cancel

    Search

    ICRAFTS

    4.7 (121 reviews)
    Closed • 10:00 am - 6:00 pm
    Updated 3 months ago

    Get pricing & availability

    Response time

    10 minutes

    Response rate

    100%

    ICRAFTS Photos

    Recommended Reviews - ICRAFTS

    Your trust is our priority, so businesses can't pay to alter or remove their reviews. Learn more about reviews.

    Reviews With Photos

    cologne engraving

    I had a last minute cologne engraving needed. he was very fast and helpful and did an amazing job. very happy with the result.

    Bern B.

    I suggest calling prior to stopping by the shop. I called prior and he let me know he was at the warehouse at the moment but would be at the store at a certain time. I liked he was specific about the times. I met with him and let him know what I wanted. He was able to make it happen. I picked up within 24hrs which was great. Highly recommend.

    Name mostly centered with front image

    I dropped off five drinking glasses that I purchased at Disneyland to be laser etched with my siblings' names on the back. We agreed that the names would be centered on the back. When I picked them up, I was in a hurry so I only looked at one and it looked great. When I got home and had time to look at them all I saw that four of the five names were completely off center! I called to let them know what had happened and I was told that "that's just the way it is. We can only center from top to bottom, not side to side." I explained that one of the names was mostly centered so, why not the rest of them? "You got lucky" was the response. When I said I was dissatisfied and that I should have been advised that it couldn't be centered instead of being reassured that it could, he became very irate and began to yell at me. He said he didn't care and "thank you for the bad Yelp review!". So I guess I have to leave a review. Also, I brought the glasses individually wrapped in tissue paper to protect them. They were returned to me stacked up inside each other with no tissue or anything to protect them. I'm very disappointed. I definitely do not recommend ICRAFTS.

    Sonny D.

    Be One did a GREAT job on our project. It was simple, SUPER FAST, and very reasonable! Can't recommend enough!

    Cake cutting set for our big day.
    Angie T.

    I contacted this business through Yelp messaging. Quick response with straightforward answers. Result exceeded our expectations!

    A careless and clueless failed attempt at a straightforward engraving project.
    Christopher B.

    My project with Be One Crafts bordered on incompetence and I cannot recommend this business. My experience was identical to that of another reviewer whose engraved item was essentially destroyed by Peter's carelessness and inattention to detail. I contacted the business via this site and received an estimate for my project. I received a response and a quote shortly thereafter. The price was reasonable and I said I would drop the item off. On the day I went to drop the item off, the store was locked and no one was around, despite the open sign being lit. I messaged Peter and waited awhile. Several hours later I got a reply that he had been "at the warehouse." I said I would be by the following day. The project was to add initials and wedding date to the knob of a Le Creuset dutch oven. Peter and I sat at his desk and put together a mock-up. He said there would be an additional charge to put the initials above, and date below, the factory label on the knob. That seemed petty for such a small job when he'd wasted an hour of my time the day before, but I agreed and paid. When picked up the item, I was horrified. Peter had been careless copying and pasting the mock-up, and had re-engraved 'Le Creuset' directly above the manufacturer label. This was of course unnecessary, ugly, and caused the initials of the bride and groom to be much higher above than the date is below. Please see the photos, it's a travesty. Only a person paying zero attention to their work would make such an obvious error. I should note that Peter told (shouted at) me straight up that he "just cut and pasted," which seems like a pretty clear confession that he's not actually looking at WHAT he's copying and pasting. Is this how you want your engraving work completed? Frustratingly, Peter was aware I had driven all the way to San Clemente to get this knob because I wanted it to be perfect for gifting. His suggestion today that I drive down there a second time to purchase another one for him to re-engrave "for free" (LOL), and hopefully get right this time around, was too much. Sorry sir, you've now wasted several full days of my effort and taken $45 of my money to ruin an item I drove 90 minutes to purchase. Thanks but no thanks. I'll save the gas and Yelp about it. Don't go to Be One Crafts for engraving projects. The lack of attention to detail has led to very poor results for me and other customers. This experience cost me time and money I will never be able to get back.

    Engraved Flashlights.

    See all

    4 months ago

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    30 days ago

    Great price, quick service! While I waited...in and out in 10 minutes. Really good job with many fonts to choose from!

    Business owner information

    Photo of Peter D.

    Peter D.

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    3 months ago

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    4 months ago

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    5 months ago

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    2 years ago

    Business owner information

    Photo of Peter D.

    Peter D.

    Helpful 1
    Thanks 0
    Love this 0
    Oh no 1

    11 months ago

    It's was very quick and met all of my expectations. Owner even came back to assist me, soon after they had closed.

    Helpful 1
    Thanks 1
    Love this 1
    Oh no 1

    1 year ago

    Business owner information

    Photo of Peter D.

    Peter D.

    Helpful 1
    Thanks 1
    Love this 1
    Oh no 0

    1 year ago

    Quick answer and estimate , fast work , I was in and out in 30 min, will definitely recommend

    Business owner information

    Photo of Peter D.

    Peter D.

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    1 year ago

    Business owner information

    Photo of Peter D.

    Peter D.

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    10 months ago

    Business owner information

    Photo of Peter D.

    Peter D.

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    1 year ago

    They did an amazing job engraving my bracelet!and got it the same day. It was exactly how wanted it! Thank you again for all your help!

    Business owner information

    Photo of Peter D.

    Peter D.

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    3 years ago

    Helpful 1
    Thanks 1
    Love this 1
    Oh no 0

    4 years ago

    Helpful 1
    Thanks 0
    Love this 0
    Oh no 2

    2 years ago

    Helpful 7
    Thanks 4
    Love this 0
    Oh no 4

    4 years ago

    Helpful 1
    Thanks 0
    Love this 1
    Oh no 0

    4 years ago

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    5 years ago

    Helpful 5
    Thanks 0
    Love this 4
    Oh no 0

    1 year ago

    Great service! Finished the job the same day. The crystal engraving Looked great. I highly recommend this company.

    Business owner information

    Photo of Peter D.

    Peter D.

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    4 years ago

    Helpful 1
    Thanks 0
    Love this 1
    Oh no 0

    2 years ago

    Helpful 2
    Thanks 1
    Love this 0
    Oh no 0
    Photo of Arun W.
    50
    5
    13

    5 years ago

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    4 years ago

    Helpful 0
    Thanks 0
    Love this 1
    Oh no 0
    Photo of Matt H.
    5
    32
    30

    6 years ago

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    4 years ago

    Helpful 1
    Thanks 0
    Love this 2
    Oh no 0

    6 years ago

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    7 years ago

    Helpful 1
    Thanks 0
    Love this 2
    Oh no 0

    3 years ago

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    5 years ago

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    4 years ago

    Helpful 1
    Thanks 0
    Love this 0
    Oh no 0

    6 years ago

    Helpful 4
    Thanks 0
    Love this 5
    Oh no 0

    8 years ago

    Helpful 1
    Thanks 0
    Love this 1
    Oh no 0

    4 years ago

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    4 years ago

    Peter has come through for me on more than one occasion. He is very fast and very professional, and his work is high-quality.

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0
    Photo of Mina F.
    0
    13
    52

    7 years ago

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    4 years ago

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    6 years ago

    Business owner information

    Photo of Peter D.

    Peter D.

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    2 years ago

    Business owner information

    Photo of Peter D.

    Peter D.

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    3 years ago

    Helpful 0
    Thanks 0
    Love this 0
    Oh no 0

    9 years ago

    Business owner information

    Photo of Peter D.

    Peter D.

    Thank you for the positive feedback . Your satisfaction is our goal.

    Helpful 2
    Thanks 0
    Love this 3
    Oh no 0

    Page 1 of 4

    Ask the Community - ICRAFTS

    Can you engrave a round urn?

    Yes, we do.

    Hello Peter Can you engrave on a crocodile leather watch box, and can you do it tomorrow?😀…

    Most probably yes, can you send me a picture

    Can you engrave on champagne flutes?

    Thank you for your inquiry. Yes, we do

    Can you engrave a name on a red Swiss Army pocket knife (Tinker)? If yes, may I drop it off this Wednesday 1/26 and pick it up on Friday 1/28? How much will it be? Thank you

    Thank you for your inquiry. Yes, we can do that. It’s cost you $35… 

    Can you imprint names on Bibles?

    I'm sure they can, but you will need to be OK with grammatical errors/misspellings, and being told that they are your fault.

    Can you guys engrave airpods? Around how much would that be?

    Yes, we do. It’s $35 Thank you

    I just wanted to know if you manufacture customized chess boards/pieces? The gentleman I work for had a customized chess set made and is now looking to mass produce it so he can sell them on his online store.

    Yes, we can do that

    Would it be possible to do an engraving on 2 glasses within 24 hours?

    Yes, Best regards

    Hello, I have a picture of my mom's signature that I would like to have engraved on a piece of jewelry. Is that something that you can do?

    Thank you for your inquiry. Yes, we can engrave that

    Do u personalized name on a 10" knife ? If so how much?

    Do you do customized medals? Antique gold with logo and colored border, and engraved lettering colored in?

    Thank you for your inquiry. How many medalion are you looking for?

    Are you guys able to personalize my water bottle with my name and polynesian patterns, if so for how much?

    Hello, it’s cost you $25 and we are open today after 11:00 Thank you

    View All 18 Questions

    Review Highlights - ICRAFTS

    “I bid the job on Yelp, Peter responded immediately with a very reasonable bid and willing to do the job immediately.”

    Mentioned in 44 reviews

    Read more highlights

    Southern California Trophy - The acrylic trophy they made;got it made  special for a talented director.

    Southern California Trophy

    (5 reviews)

    $$

    Tropico

    Very fast turnaround (about two weeks) And very customizable…read moretrophy's plaques etc with A LOT OF OPTIONS! I was able to call and speak with the woman in charge who was able to ask me a few questions and if I had been on the website. The website wasn't truly easy for me to navigate - I let her know I would prefer to have see in person. So I made an appointment to come in the store the woman then walked me to the upstairs trophy display case and was able to describe and explain the differences between those that are offered and shown and how much customization I could do as well. After having picked out all the few details that I wanted including the shape and material- I was able to move onto the words that I would like engraved and also the picture. I was then given a mock up of the receipt which I decided to pay for on the spot. After this I have been in contact via email because I was quoted a date I would be reached out to but I hadn't heard anything, so as a new customer I sort of panicked lol I did get very prompt responses afterward. My experience went pretty well even with that small hiccup. The only thing that I was unaware of was the (lack of) weekend hours /so I had to wait a couple of days to pick up my product. & the friendliness level could also increase All in all, I do recommend.

    I am extremely impressed with Southern California Trophy and will definitely come back should I…read moreever need another plaque/trophy. I submitted a custom order request and was originally told it would take a week or more to complete the plaque with my specifications. Due to a deadline at work, I really needed the plaque to be completed in a few days. After speaking with Karl (the President), he assured me that he would work to have the plaque completed and delivered within my timeframe. Even with all of the customizations and the size of the plaque, the price was very affordable compared to competitors. I was blown away when I saw the plaque. It looks fantastic with all of the customizations I ordered and exceeded my expectations. I am so pleased with the work and thankful that the SoCal Trophy team was able to create such a beautiful product in a short amount of time. 10/10 would recommend. Thank you!

    Anderson Trophy

    Anderson Trophy

    (88 reviews)

    $

    Sun Valley

    I highly recommend Anderson Trophies! I needed a basketball trophy on a very short turnaround, and…read morethey came through when I needed it most. They were reliable, professional, and had great communication throughout the entire process. They made sure everything was taken care of quickly without sacrificing the quality of the trophy.

    The facts: I had 5 items of anodized aluminum (approx…read more1.22"x1.62") that I wanted laser engraved (ablated, technically). Jon provided a quote and turnaround time via email within 24hrs of me inquiring. I dropped off my items on Friday, and they shipped them back to me the following Monday and I received them Tuesday. --- The good: Out of the 6 places I inquired with, Jon was the only one to provide an itemized quote ($8.95/item x 5 + $20 setup charge = $64.75) and a reasonable turnaround time (1-2 business days). The team even provided a layout for me to approve of the placement that closely matched how I designed it, to which I approved. The engraving marks themselves were crisp and clean. --- The bad: The items were offset left ~1mm and immediately noticeable upon receipt. I reply to the layout approval email to ask if being ~1mm set left was within tolerance and if there was anything I could have done to insure better alignment. The team did not respond to my email for over 24hrs. Potentially being lost in email threads, I added "quality/alignment question" into a follow up and this is the email thread: Jon: "We do not work with mm or cm. Our machines are not set up like that. So, outside items have a risk of possibly being off such a small fraction of an inch (0.0393701)." Me: "Noted. It would have been helpful to know the tolerances ahead of time to manage the expectations and design. I'm new to laser engraving and would appreciate advice on how I would be able to get more accurate alignments? Would additional templating help? I want to have more of this work done, potentially and want to make sure things are set up for better success on both our ends." Jon: "Hey Ellis, 1mm is such a small amount; all laser jobs could be at risk of that. It would not matter how the art is setup." --- Opinion: I wish I would have been informed of the tolerance they were comfortable in providing so I could determine if I approved of that. From what I gathered about laser engraving, getting a design aligned and centered on a rectangular item seems with reason. And, their layout led me to expect that's what they were going to deliver. Attached are photos of their layout I approved and what I got. I'll leave it to you, Yelpers and visitors, if you feel this is accurate enough for your purposes. As for me, I'll be exploring other services that can at least inform me of tolerances ahead of time and/or assure me of more accurate results.

    ICRAFTS - engraving - Updated October 2026

    Loading...
    Loading...
    Loading...