I have been homeless for the last 2 months and my hair had gotten out of control. I had no many and…read morehad several job interviews lined up. I borrowed $10 from a friend and went a got a cut. I had SAM. He was really professional and respectful. I told him my story and wanted to make me look good for my interview. SAM gave me the best haircut i think I may have had. Being homeless for the first time and in recovery I just couldn't get the money or time together, but I am so glad I came in. When I left the building, I cried.

They use to be really good and cheap hair cuts at the Barber Shop and Salon but it's hard to find…read moreout when they are open during the term. The reason they don't post when in term and not. They have the hours when in and not. Another problem you can't make appointments eith on phone or online. They don't answer the phone either or tell you when they in term or not. I have gone down town and thought they be open and are not. Wasted time and money parking too etc. So, I decided to go elsewhere. This is not good business sense. You lost my business. If you call the main school number and if you get some one to answer the phone you get run a round and excuses and no way to leave a a complaint to who runs the school in the Barber Shop and Salon.

CHC Training has quickly emerged as the preeminent training provider in Colorado across multiple…read moredisciplines. Danaya is committed to both quality and accessibility of the many courses in which they provide instruction. I am confident that when we send employees to CHC, that they return with the most up-to-date knowledge required in the ever-changing and growing field of environmental remediation and industrial hygiene.

From the owner: asbestos training, hazardous material trainingread more

I learned a lot in the last 21 months attending DCN, although it is an accelerated program it was…read morean expected learning rate and I enjoyed the content very much! The staff is also very quick to reply to you when you have questions which is very dry helpful!

If no stars were an option, Denver College of Nursing would earn it. Behind the attractive…read moremarketing and boasts about NCLEX scores, students face unrealistic grading standards and unpredictable policy changes. Your entire grade hinges on exams--one slip-up and your quarter is ruined. Leadership, especially Amber from pre-licensure, portrays empathy publicly but treats students dismissively in reality. Constant faculty turnover worsens this chaotic environment. Consider other nursing programs to avoid debt, stress, and disappointment. This place suckers you in like a casino. Separates you from your money and then nothing to show for it

Haha can't believe this place is still running. Bad company, awful staff bad reviews look pretty…read moreaccurate to me.

I took the Axium Academy Master Class this month with Wade, and was very satisfied with the course…read more The course includes InterNACHI membership and certification through their website, that ties into what Wade goes over in class, with plenty of pictures that Wade has collected over the years of almost every condition. The class is taught by a Certified Master Inspector, and is not just the rehashing of the online curriculum, but a supplement and expansion to the online courses. In the Master's Class there is a business and marketing component where Wade shows us what marketing efforts he has done that work, and what haven't been a good ROI. I am looking forward to the ride along inspections and feel confident that I will have the support and resources from Axium when I open my own business.

What a waste of my time!!…read more Here's the long story, in January 2025 I went in to talk about the X-ray tech training because I saw the advertisement outside the building. I talked to the advisor about the program and was told the next opening doesn't start until January 2026. I thought that's a long ways away but was told that will give me plenty of time to get ready, ok fine. A month later I had to take a test on the computer (I forgot the name of it) to get a good enough score. I got a 23 first time and then was told I should do it again so I had to come back a week later and I got a 25.I was told I got a good enough score and should be fine. A couple months later I went back in to see my advisor if I'm on the right track, at this point, I was now told the X-ray program won't start until March 11th, 2026. I thought that would've been nice to been told that sooner but whatever. So the next step was a face to face interview with the X-ray tech "head-lead" person. I had the interview on October 31, 2025 and I thought the interview went well. I was specifically told that I would know if I got in the program or not and that she would email me by the end of the first week of December, great. The end of the first week of December comes and no response, I wait another week, no response. I emailed my advisor, who in the past would get back to me in a timely matter, about whether I got in the program or not, no response!! I never heard back from this place. It's honestly so bizarre and I'm counting my blessings that I didn't just pay them $55,000. What gets me mad is the fact that I wasted a year dealing with this place and not doing something else that values my time. I knew the ratings for this place were bad, but I'm the type who still likes to see because maybe it's not as bad as people say. Well sadly it's true for me.

It's super sad that this school has host sites that are not willing to give warnings or second…read morechances to externs that are still learning. Then the school doesn't offer any kind of training to overcome those failures. Then tells the student they must start all over and pay again since 2 host sites did not try and work with the student learning. That is just sad what kind of hope is that for anyone learning a new field! What a waste of money and time to spend with this place!

I was a welding student at Lincoln who just graduated. I was there for just over a year. My first…read moreever class was taught by Austin Sleep. Austin was very helpful, always excited to teach and created an atmosphere of energy and enthusiasm for welding. He got us excited for the jobs to come and for what we could do with welding. Needless to say, I enjoyed my first two classes with him and improved very quickly. My third class is where things got messy. I understand that a lot of the time, classes will go from 110, to 120 then to a random class, and then back to 130. The teachers are like "that'll happen." I think this shows how unprepared this school is. WEL120 is a stick welding class. Going from 120 to 140, which is TIG, is majorly difficult. We never even learned how to fill up a groove with stick before we had to tackle flat, horizontal, and vertical fillet welds. Then, with only 2 weeks left, we were expected to also learn flat, horizontal, vertical and overhead groove welds. My entire class was discouraged. Many dropped out or flunked out. If everyone is struggling, something was obviously done wrong by the teachers. Austin was by far the most helpful. Dillon, Todd and Lopez are all condescending and very obviously fed up with teaching. Todd always looks at you like you have two heads, and Dillon always gives some snarky remarks back to you when asking a question. Yes this is blue collar work, but a teacher should be fully engaged in helping the students. The classes move too fast. 5 weeks for each process and type of weld. 5. For classes such as fabrication, MIG pipe or any plate classes, this is a good amount of time. But 5 weeks to learn 3 positions with stick is not a very long time. Especially if none of the instructors are willing to help. I had to watch youtube videos the whole time I was here to fully grasp the concept. They also cut you off completely from any new metal the day you graduate. I could understand this if they actually taught you how to use a plasma cutter to cut up old scrap. But no. They say "let me know when you need some cut" but then are never around or refuse to help you cut it. All together, I say to the reader, DONT WASTE YOUR MONEY!! You can learn as much here as you can getting a helper job somewhere. If all you want to do is fabrication or structural welding, it's okay. But if you actually want to learn how to pipe weld, good luck.

--WARNING PLEASE READ-- This is by far the worst…read more"school" I have ever attended, if you can even call it that. I expected to learn how to identify and fix problems in an automobile like the school advertised. Instead I got lazy instructors who couldn't be bothered to do their job. Have a question? don't bother asking the instructor cause he is either heavly intoxicated (drunk), asleep, or just didn't bother to show up at all. I am not exaggerating when I say drunk, there were at least 4-5 times an instructor came to class intoxicated and more times then I can count not even showing up. This doesn't go for all instructors, but it's a good 85%. this is a joke of a "school" SAVE YOUR MONEY FOR SOMETHING BETTER! OR A DIFFERENT SCHOOL! worst 40k I will ever spend in my lifetime.

We only went in to purchase snacks after attending the Van Gogh Sit Down Exhibit. It looks like a…read morevery nice quiet place for students.

GA Denver has a little something for anyone working in or around tech. From free intro classes for…read morepeople exploring whether tech is for them, to full-time immersive courses for those seeking a career change into tech, to opportunities for seasoned tech veterans to give back by teaching and mentoring. What I think makes GA Denver special is that they really want to help their students succeed, not just to have some metric to put on their website but because they really seem to care about the success of their students. They have accessible instructors and administrators who value feedback and regularly check in with their students. I found GA to be a great experience (I took a part-time Data Science program), and I would particularly recommend their immersive programs for anyone trying to change careers into a tech field.

Wow, I built a fully functional 1 bed, 1 bath house complete with running water, full electrical,…read morehand trowelled drywall and moore! In just 1 month going twice a week I used tools, materials and techniques just like the pros do. The class is fun and you learn by doing not just listening to someone lecturing or reading books. Anyone with a pulse will benefit from this class, throw your yellow pages away after Moore Tech you will never have to call to get anything fixed again.