I needed some custom welding work done on my bow fishing boat and Johnny came through with flying…read morecolors. Solid work with a reasonable price tag. If you're looking for a welder you can trust then stop looking - you just found him.

We are so happy and impressed with Bravo Fabrication's work. Johnny, the owner, was quick to reach…read moreout/set up a meeting and was on time and super informative on every aspect of our project. We had a pretty tight deadline and he made it work. We can't recommend him enough. The quality of his work is 10 out of 10. Thank you for making our backyard dreams come true!

Requested an engine cover to replace a worn, sagger as they are no longer available OES or…read moreaftermarket. Owner took a great deal of time to understand what was needed, materials then make the honest assessment it was not something safely done by OCF. Absolute value these days as able to find a solution, and no charge from OCF. No question will find a good payday and use them. Obviously good work as well as principled ownership. Will not hesitate to use them.

Miracle Fix: Jose and Lorenzo Saved My Miata. Answer to my…read moreprayers. Expert welders and fabricators. My Mazda developed a loud rattling and knocking noise underneath and no one could figure out why. I went to eight different shops. Each one gave me a different guess: heat shields, engine mounts, catalytic converter, "play in the differential," you name it. Nothing made sense, and the noise was so annoying at red lights and/or with foot on the brake . Finally, one honest shop (Thanh Auto in Garden Grove) spotted the real culprit: a big clean crack in the aluminum mounting bracket attached to the differential housing. Every mechanic I spoke with afterward told me the same thing: "Only solution is to drop the entire differential and replace it." Translation: very expensive. Thanh's expert ( Keith) suggested welding the crack, but every welding shop I contacted said the same thing -- "No space. We'd have to remove the differential before welding. Almost as costly as replacing the whole diff." Then I found Jose at OC Fabrication on Yelp. Within minutes of sending him a photo, he replied ...fast, professional, and confident. He said it might be doable without removing the diff, but he needed to inspect in person. He even gave me two honest estimates: a higher price if the diff needed to come out, and a much lower one if he could reach it in place. He squeezed me in after hours the very next day. He and his welder Lorenzo crawled under the car, inspected the crack, and confirmed they could do it without removing anything. They carefully jacked the differential to realign the broken ear, cleaned the aluminum, welded it beautifully, and then reinforced it with additional metal. All in under 90 minutes. When we test drove the car afterward -- night and day. Smooth. Quiet. Solid. The rattling and knocking that haunted me for a weeek? Gone. Jose told me straight: most shops wouldn't even attempt this kind of repair. But he and Lorenzo took it on with skill, confidence, pride in their craft, and real customer care. They solved a problem that eight other shops shrugged at. I can't recommend these guys enough. Professional, talented, honest, and genuinely passionate about their work. Bravo, Jose and Lorenzo. Many thanks. Bonus: Their shop is amazing -- full of unique custom fabrication projects, metalwork, and creative builds. Kudos for their skill and craftsmanship and care.

Couldn't be happier. They took on my custom project and delivered a beautiful product in a short…read moretime.

From the owner: A & R Laser delivers precision metal fabrication with fast turnaround and direct, owner-operated…read moreservice. We handle laser cutting, bending, and welding for custom prototypes and small-to-mid–volume production. Clients choose us for consistent quality, flexible capabilities, and clear communication—whether they’re manufacturers, designers, or DIY makers.

Robin did a great job on my stainless BBQ grill where the tack welds failed. Service and quality…read morework.

Full service, from fabrication of a simple skid plate to a 16ft custom hauler trailer…read more Rob & Robin can do it all

So glad I found this husband-and-wife team! I originally asked them to come out for a quote on a…read moresimple, basic gate. Then my wife got involved and started asking for all sorts of custom designs and ideas. Leah and Memo never said no--all they did was find ways to make our gate dreams a reality. They custom-designed two gorgeous side gates for our home and even recommended adding a smart keypad lock for safety and easy access. ​But what really earned them five stars was their incredible attention to detail and Memo's drive for perfection. He wasn't happy with how the gate looked against our side wall because the wall was old and a bit wavy, so he actually took his work back to the shop to adjust it to seamlessly hide the wall's imperfections. Then, noticing that some of our stucco wasn't flush, he brought extra stucco with him and fixed our wall himself! Exceptional service from start to finish.

After receiving a bunch of "Sorry, we can't help you" replies here on Yelp, Memo's came through…read morewith a friendly professional response. With the help of his wife Leah, Memo was able to fabricate a part of needed for a guitar build. I needed a piece of brass cut to a specific shape. It came out perfectly. Memo will be the only place I go when I need these custom one offs. Memo and Leah are the best and I feel so much better supporting a small business.

I came here for the public scale for an out of state vehicle registration at the dmv. There was no…read morewait, it was affordable and the staff was kind and efficient. This is officially my go to for weighing your vehicle for the dmv.

Went there for a simple piece of flatbar. Got to the counter, purchased the piece and walked out to…read morethe yard with my receipt. Waited about 15 minutes before "Carlos" took my receipt to retrieve my metal. I was standing there before several other customers arrived with their receipts. They handed their receipts to other dudes, but not to Carlos Well, those dudes all came and went with their purchases while I still waited. I asked Carlos how long it would take, he said he had to get the metal from the back area because they didn't have any up front. He then proceeded to cut metal (not mine) on the saw there. After waiting 45 minutes and still no metal, I asked Carlos for my receipt back and went back inside for refund. A manager asked what the issue was, he checked the product and time on the receipt and then said he'd handle it. He went out to the yard, said some stuff on his radio and within 5 minutes, he came back with my metal and apologized for the wait and poor service from Carlos. Time is money and Carlos could care less. Anyhow, quite annoying but glad I found the manager and he solved the issue.

A1 repaired my Moms iron gate, which was improperly installed, followed by 3 yes 3 prior attempts…read moreto resolve the perpetual ISSUE, our issue was the gate not aligning correctly to close. The installers put only one hinge with two screws. This large heavy gate needed far more support. Where others did not or could not figure out the best remedy, Norbert and Cecilia did! When the welder Norbert he explained each step of his plan and HIS PLAN IS BRILLIANT! We are AMAZED AND MOVING FORWARD WITH ANOTHER PROJECT, my Moms back fence.

After searching in the local area, I ended up using A1 Welding for my project and it turned out…read morevery good! It was a semi-complicated arrangement of 1x1 square tubing that formed a structure for our motion simulator. We were pleased with the outcome as well as the service and communication. It was also done in under the estimated time. I would highly recommend this company for any type of welding projects that fall in their scope of work!