Had them cut into gate and place a sturdier USPS Key Keeper. Great job done on time and at a very…read morereasonable price. Highly recommend them.

Very professional, the quality of the work was excellent, and his communication was clear. I would…read morework with him again.

Alan was very arrogant with zero respect to a potential customer. He is not a nice person to work…read morewith and now I can see I'm not the first to feel like this. Very unfortunate

This place is great! I worked with Alan to get a small stainless steel plate cut for a control…read morepanel. He was most concerned about being able to do the job before moving forward. He was very professional and I'm planning to work with him on future laser projects. Just a note - If your project includes cutting into an existing product or other requests that may not come out at a high quality level Alan will have questions. (I think this is much better than plowing the laser into something and ruining it.) I want to address the low review from the engineering student - you should heed the lesson in how to not be a high-drama customer. The expectation that your on again / off again rush job is showered with time and attention from your vendors is a little entitled (unless you're paying them for it). I guarantee other trade professionals (e.g. machinists) will have a similar attitude if you pull that and they are not the problem here.

He's the guy to go to 1000% Awesome work and cool guy to work with. Definitely will recommend him…read moreto anyone I know. Best turnaround time as well.

So my second time here and this guy never sease to amaze me .I broke the weld on my aluminum boat…read more Came here and back on the water in less than 1 hour

Been here a few times with my buddy but today I went alone because I needed something cut. The…read morestaff asked if I needed help and I told him what I needed. He crunched some numbers, found it it's cheaper for them to cut it for me vs me buying a bigger sheet and spending my own time cutting it to spec. They saved me hours of work for something that may not have turned out as nice as how they cut it. It took about 20 minutes and the gentleman was nice enough to walk out to the parking lot to find me and let me know. I parked in the back and they brought it out to my car. I changed the specs last minute and they accommodated that too. My buddy told me everyone here is helpful and nice and that's 100% the truth! Everyone here is so nice and polite it felt like I was at a resort. Companies like this will be around forever because of staff like this at Industrial Metal Supply.

I called ahead and told them I wanted two 1/2 inch stainless steel square bars cut to 24 inch each…read moreand I got quoted a price at $36. Awesome! I rush there after work before closing and they quote me at $60 cause they charge for the cut. Why wasn't I quoted the cut price too when I called in and told the dimensions. They ran out of 3 feet uncut ones for me to cut myself but the worker was at least helpful trying to find leftover stock. Otherwise I had an issue with whoever I talked with over the phone that misquoted the price and wasted my trip.

We hired Joey to build a railing and hand rail for our remodel. We needed to replace old wooden…read morerailings that were removed as part of the remodel. Great experience all around. He came to us with samples of all his railings. Being able to see the finished product helped us decide what style we wanted. We ended up changing our mind after seeing the samples, so this was really helpful to us. Later on, he came out to measure multiple times--before and after the floors were down--to make sure everything was perfect. He matched the wood to our floor in to help create a seamless look. He was super careful when he installed them not to damage any of the new construction. Everything came out perfectly. The glass railings look beautiful and well worth the investment. I would highly recommend Joey.

Beautiful stair rails of metal, wood and glass. Joey and his crew are passionate about their work…read moreand did all of the installation themselves which took 3 days -metal, wood and glass. They kept our house clean by protecting the floors with cloths and covered the wall with paper. Overall a great job and we are very happy with our rails.

Robeck's has earned the high ratings they get. We had a hospital bed widened about 8 years ago,…read moreand the workmanship is of the highest quality. They know what needs to be done, and they take pride in their workmanship. I recently asked for their help to order new casters for the bed, and Sam guided me through my options (at no charge) so that I would order the appropriate replacements. When the casters arrived, they sent their guy Jimmy to our house to replace the casters on the bed. These guys are extraordinarily generous with their time and expertise. All of the people I have encountered at Robeck's are respectful, ethical, and kind. I can't imagine getting better service anywhere.

I needed a steel shelf built for my work truck, this place had great reviews and they did not…read moredisappoint. Their friendly staff was more than willing to help, came out to my van took measurements for me and made a drawing of what we needed and were more than willing to get it done quickly and skillfully. The shelf was ready in about a day and I got a call that I could pick it up anytime. It was exactly what I needed and I couldn't have been happier. Then a few months later I needed something powder coated i gave them a call, they don't do powder coating but were still super friendly and hooked me up who they use, SRS Industrial Coatings in Santa Clara, and they are just as wonderful! Thanks for everything you are our go to for fabrication needs (I keep coming up with plans so I am sure you'll see us soon!)

Juan and his team were excellent. I came to them with rough drawings for a really small project for…read moremy kitchen (I needed them to create an exact copy of an existing range hood cover with some custom tweaks and some custom gas range trim kit pieces) and they executed my ideas perfectly, pointing out problems with my designs and also willing to help revise and tweak the final product as well. (I had to make a stainless steel version and then swap to aluminium due to the weight) Throughout, Juan was straightforward and honest with me. Definitely would come to him and his team again for any metalwork I need done!

We hired Yes Welding to design and build a fully custom railing for our deck, and the result…read morehonestly exceeded our expectations. This wasn't just a railing, it feels like a piece of modern art. The lines are incredibly clean, the welds are flawless, and the whole structure feels rock solid and beautifully finished. You can tell right away that this is true craftsmanship, not off-the-shelf fabrication. The owner has a real artistic eye and helped us design something totally custom that fits the space perfectly. He paid attention to every little detail and treated the project like it was his own home. Super professional, communicative, and just a genuinely great guy to work with. Quality like this doesn't come cheap, but when you want something done right and built to last, it's 100% worth it. If you want master-level metal work, Yes Welding is the place to go. Highly recommend.

Brian took on the job of replacing a cracked lift off hinge needed for my aging sailboat. It was a…read moresmall job for JP but an important one for me as I was unable to source a replacement for the 35-year-old cast part and it was a critical piece used on the entryway teak doors. JP and Brian came through with a precise stainless replacement part. Cudos to their customer service and attention to detail. You'll not be disappointed when choosing them for exacting work.

These guys do amazing work. We outsource our fabricated…read moreparts to JP metal fabrication because of the quality, price, and quick turnaround.

We had Mark fabricate a mailbox stand for our newly remodeled exterior. We had an idea and Mark…read morebrought it to life. I wish we had more jobs for him because he was delightful to work with.

In installing my Range Hood we realized the chimney was too long for our 8ft ceilings…read more Understanding it was a very small job to just cut the existing stainless steel chimney cover many of the companies I reached out to were very expensive or would not even consider the project. Mark responded quickly and arranged to get it done immediately ensuring that the other contractors for my project could keep on schedule. Not only did he get this job done with beautiful results, he also gave me great advice for other projects I'll need to do to complete my home remodel!

This is our 50th year of going out of Business, asked how we made it this far?…read moreGood choices in Vendors and employees. Advance we have been using for 20 years. All of Advanced Laser and Water Jet (people very customer service mined and proactive ) and competitively priced, we could easily have our work done closer but not get as good service.

Hands down this is a great go to for small and large projects. The communication, Service and…read morequality are second to none. I cannot say enough about this company. We love the option of being able to choose laser or water jet for thicker materials. We have been using Advanced Laser & Water Jet Cutting for about a year now and highly recommend them as a laser & waterjet provider