We have an old home, over 100 years old, and over the 20 years we've lived here, we've had quite a…read morebit of work done. Superior Structures has been, by far, the worst company we've had to deal with.
Our initial request was a 5' tall fence, with 3' of privacy fence and 2' of lattice at the top. We live in the middle of Lafayette and have a relatively small yard. A few blocks down from us is the exact style of fence we wanted. We informed Superior Structures of what we wanted, let them know the location of the fence we wanted to emulate, and they assured us they would produce a fence "better then" the fence we were trying to mimic. Our initial impressions were positive.
Work started out well, I removed our old fence and had everything cleared for them upon their arrival. They laid in 4x4 uprights for the general fence and 4x6 for the gates (3 gates in total).
Then the building of the actual fence began, and things went downhill immediately. First, they began building the fence at a 6' height, a full foot higher then we had agreed on. Upon being informed of this, they told us it's too late now, and tried to tell us that any modifications at this point would be an additional fee (this fence was already costing us $8,000... Partially this was due to Covid price increases... but this was $2k more then the closest competing bid). We finally talked them into correcting the issue after showing them proof of the original agreement.
Then we were informed that they could not purchase the straight lattice (instead of the 45 degree angle you typically see) for a reasonable cost, and that they'd build it. Each section was built with 1x2 treated lumber, which would've been great if they'd checked the pieces for straightness. They did not, so the lattice looked closer to spaghetti.
Upon "completion" of the project, the tops of the gates were not level with the fence, they'd shortened the fence, but not the gate, so we again had to have them fix that.
The tops of the fence were not level, they did not flow with the ground level, nor were they level at the top. So there was no strategy for flowing the fence from one section to the next. Additionally the separating wood between the privacy lower and the lattice upper were neither level with the top, NOR level from segment to segment.
The privacy segment, instead of being framed and inserted into a frame, were just tacked onto the front.
the lattice was tacked together with staples, and later fell off.
their "no sag gates" sag constantly, the latches they provide are horrible and i've had to adjust them constantly.
And the icing on the cake, absolutely no after completion support.
All of these above issues, minus the height difference between the gate and fence, were fixed by myself, as the company would not take or return calls.
Years later and we're still regretting using these guys.
If you have any custom portion of a fence, whether it's gates, not perfectly even terrain (the terrain on this project varied in height less then a foot from end to end, and less then 3" from segment end to segment end), a unique design, or you expect support after the initial work, stay far, far away.
If you want a cookie cutter privacy fence tossed up.... do it yourself, you'll still do a better job.