Bought one of their Vanguard masks during the Rona shelter in place period. Great selection of a…read morecolors and styles that would suit my purposes. Looked great online, like the fact they are giving a free mask to /medical personnel/first responders for every one purchased. Liked the fact that a designer: 1) had stepped up to the plate to design from scratch a well fitting and high-quality mask; 2) was forward thinking enough to design it with straps that go around the head rather than over the ears (personal choice, more comfortable) 3) chose to make it with high quality yet BREATHABLE material that also had an amazing look and 4) was focused on keeping their people employed and engaged during Rona. Just to note that this mask is one that is worn to reduce risk of Rona and other viruses and is not a respirator/N-95 type mask---it's the cloth mask that you see most people wearing in public. Mask arrived and exceeded expectations. I ordered the all black one and it truly was exactly as I had hoped. Very well made, excellent construction, material was strong yet breathable. Straps were much much stronger and softer than I expected. Also, the adjustments on the straps were excellent and perfect for use as a mask. Very impressed. Wore it for a week and got stopped numerous times by people here in Chicago asking where I got such a great looking and well-fitting mask. People really liked the straps that went over the top of the head and behind the neck----very unique design and the straps were also very unique and adjustable without looking out of place and clunky. Ordered 2 more masks for my own use and again, they arrived and were just as high quality as the 1st one I purchased. One of the 2 had a super unique deep blue design and I got stopped on the street wearing it and asked where I purchased it. I directed them to Ari Jogiel, told them they are made in LA and what a cool company it is. Chicago folks were really impressed with this and some even took pictures of the mask so they can make sure they got the same one. Not a photo type guy but I allowed it in this situation! Really overall excellent experience with this design company. Such a great response to Rona, great mission-focused effort, loved that they are donating a mask to those on the front lines and that they took the time and creative effort to design and manufacture such a practical yet aesthetically pleasing mask. They also do other great design work as well and you should check out their great designs and products on their page, especially if you appreciate forward focused design. Glad I now know about them and their great works of art!

Horrible service...as a graduate of FIT, I was appalled at the service provided by Ari & his so…read morecalled team. To think he said that bucket hats are not in style?! In LA?! Thats where the bucket hat became popular over 50 years ago?! I should have walked out then, but I stayed & even gullibly paid for his dispassionate service. He charged me to do absolutely nothing. The entire interaction starting with his assistant Denyse, was a total waste of my money, time and effort. Do yourself a favor and save your valuable time and your money. Find a real fashion start-up business owner who actually knows something worth while for your business and someone who is at least current on fashion trends, style and fashion in general and also willing to help you get started. I decided to write this review only because I want other people like myself, who are seeking a reputable fashion production company to help them launch or re-launch a fashion brand to know that Ari cares nothing about your purpose, vision or what you are looking to accomplish with your fashion brand. Look elsewhere! There are much better production teams in LA!

Im totally a fan of this crew! We have had VERY mixed/bad experiences with graders and markers in…read morethe past, so finding this place was a welcome change. They are skilled, very fast (they've rushed grading and marking of patterns in a matter of hours for us during productions), and just nice people. They also have most of the operating systems which is a big help. We have used several pattern makers and graders/markers over the last few years, so to find one place we could FINALLY bring all of our old Gerber files as well as our Optitex and other files to was great. I totally recommend!

Best grading company in Los Angeles. Have worked with them for many years with grading all types…read moreof clothing and other unusual items. They have all types of equipment and systems, and can send patterns across the USA to other computers. This is very convenient. For complex and custom projects, they are very knowledgeable and skilled. They follow instructions and are very accommodating and generous with their time frame. I would trust them with all my exclusive projects.

Natasha has been a dream to work with. From her vast knowledge, skill, and resources to produce…read morecustom garments at scale - she's everything a producer/designer could ask for. She guided me through every step of the sample making process - even walked with me through the fashion district to pick the perfect fabrics. She really cares and knows her stuff!

Working with you on this jacket was such a great experience. You really understood the vision from…read morethe start and translated it into a pattern that feels thoughtful, balanced, and beautifully executed. The fit, proportions, and overall structure came out exactly right, and everything feels intentional and refined. Nothing feels overworked -- just clean, confident pattern making that lets the design shine. I'm genuinely so happy with how it turned out and grateful for your care and skill throughout the process.

Great quality output. Paul turned around my order quickly and even included a second test part in…read moreresin at no cost to me. Highly recommend. Will use File2Fab again!

My well over 10 year old massage chair in near perfect working order had 2 broken plastic rollers…read morethat prevented the chair from going completely down the track. They do not make replacement parts any longer and I was going to end up having an expensive chair that would be more of a chair to sit in than massage chair all because of a couple pieces of inexpensive plastic. I called another 3D printer first and he said he would charge 1 to 2 hours of design at a cost of $150 per hour, then $25 for each roller. Then I called File2fab. Paul said he would make new rollers for $19 each and it would take about a week. He did not charge me for design. He did not charge a minimum fee. I kept thinking this sounds too good to be true, but it was true. The rollers he produced were perfect and are much stronger than the original rollers. The chair works great now and I bet the new rollers will outlast pretty much everything else on the chair! I feel a little bad that Paul is not going to get rich from selling me $19 rollers so I am writing this review to tell everyone to try him out and hope he gets rich from all the new business. Great work. Perfect product. Very reasonable prices. Highly recommended.

Extremely impressed with the service I received from the team at Elementall. I needed help with…read moreproduct design for a project I was working on and they were quick to respond and take action. They started off by getting to know me and my goals and then took off from there. Their consultation was extremely thorough and felt very comfortable. Within 5 minutes I knew I could trust them because they were so passionate about helping me and were already offering solutions. They also gave me advice on updating my business' logo and website. Felt like a one-stop shop for my business needs! Thank you Elementall Design House - I have highly recommended your services to anyone in need of product/graphic design!

G and Sarkis were great help with consulting with me about my business start up and creating a…read morestrategy, and I'm looking forward to having them design my start up product. G took the time to listen to what I needed in my business and broke everything down step by step helping me understand the steps needed to succeed. I would highly recommend them with a business that needs guidance.

I worked for Fil and Needle as a fashion model initially and then decided to bring in some clothing…read morethat I needed repaired. Cyrus and his team were extremely kind, respectful and helpful in fixing my favorite jacket and a dress that I needed stitching on. You can tell that the whole team is passionate about what they do, and everyone here has a good sense of humor and has the goal in mind to provide you with quality service.

Approached F & N after learning of them at Textile Show. Interviewed Cyrus and was impressed with…read morehis knowledge and abilities. Expected to move portion of our line with him for full pkg. Unfortunately, execution was abysmal. Production details covered during lengthy meetings were ignored/forgotten. Deadlines appear to be voluntary and/or not taken seriously. Agreed upon pricing was continually revised upward to ridiculous levels. Faced with customer delivery, we agreed to the extortion. Goods were received, 80% of units were damaged and 100% of units incomplete. F & N did repair and complete, but refused partial chargeback. Could have received this type of treatment for 1/10th the cost at any sweat shop in LA. We also delivered some finished paper patterns to F & N for digitizing and production. Once digitized, he would not hand over the files without another inflated payment. So we pulled the plug and retrieved the original paper patterns ... but, pieces were missing from each style. Sabotage or incompetence? We'll assume it's the latter. Regardless, results remain the same: paid top dollar for incomplete/damaged goods and have a net gain of MINUS 3 patterns.

I had an urgent project and had to call many places in diff. areas to ask if it can be done in…read moretime. Wasted a day looking for the one, but here it was done less than 24 hrs and was located in heart of DTLA - so close to my workplace. Sam helped me out to complete the job, double checked, ensured me. I will totally recommend this place to anyone who need 3D scanning or 3D printing. Wish i found this place sooner.

Arsen really understands your concept and executes perfectly. Finished the job quickly and provided…read moregreat customer service. very warm. Appreciate it rp depot and, will definitely be doing more business (thumbs up!)

I just picked up my prints. They look fantastic! The turnaround time was less then a week. I went…read moreto riot because I needed a flatbed printer with white ink. I requested a quote and Theresa followed up the next morning. I worked with Melissa and Oleene there after. This is definitely the place to get fine high quality prints. I highly recommend Riot.

I've used Riot for my job projects as well as personal. Their turn times are phenomenal and the…read moreprint quality is stunning! They make it very easy for me to be a picky customer! My sales rep Theresa is quite versed and knowledgable about unique printing needs and various substrates. Darlene has also been a huge help with several of my projects! I would highly recommend this company as well as Theresa and Darlene's expertise!