THE BEST! Charmaine and Earnest go above and beyond to listen to your car problems and fix them as…read morequickly as they possibly can! Don't delay and call them today!!! You won't regret it

Charmaine and Ernest are the sweetest local couple who run an honest and fair business. This isn't…read moremy first time coming to them in a time of crisis, and once again, they were there to help me, going above and beyond to make sure I understood what was going on with my car and fixing it up. I couldn't recommend them more! They are fair and really take the time to educate you and break down step by step what is needed for your car. Mahalo!

Snyder gave us a good pricing just to get my heads resurfaced along with a valve job!!read more

I went to this place to have my wheels looked at it to see if they can work on it because in the…read morepast they have and it worked on wheels before, but I think now they don't do it anymore.

Exellent attention to detail. Extremely Affordable compared to other machine shops on island hands…read moredown!!! Took my Cylinder head in to be rebuilt on Wed. Got a call that it was done and ready for pick up by thursday evening. Other shops quoted $600+ just to resurface. At headhunters got it completely rebuilt with a whole gasket set and it looks like new for the low quoted price of $500. Which included decking. 16 new valves. Adjustments. And a totally new looking cylinder head. If i could give them 100 i totally would. Thanks again Kimo, Bobbi. And my budddy the choco lab!!!!

From the owner: Specialty Machine Shop for the Repair of Gas & Diesel Engine Cylinder Heads. 3 Angle Valve Job,…read moreValve Seat-reseat or replace. Valves Guides- repair or replace. Valves-reface or replace, Resurface/Mill Cylinder Head, Bead Blast, Pressure Test, Vacuum Test, Magnaflux.

Very honest guys to help machine my engine head. I brought in a 1.8 JH for a Volkswagen golf mk1…read more Really nice guys and while it is pricy compared to others, i had no problems with their work so cost is good value for me. Requested a deck and hot tank since the engine was about 36 years old. Very happy with the results.

I have to give a huge shout out to the guys at Ted's Automotive. I just moved to the island…read moreyesterday and rented a car to go grocery shopping. I was on my way back to return the car when my phone died and thus my only source of navigation. I had no phone charger in the car. The car was due back at the rental shop in 10 minutes and I had no idea how to get there. I saw someone outside of Ted's and so I pulled in and asked them if they could help me. It was 5pm and I'm sure they were all finishing up their day and wanting to go home, but two of the guys stopped what they were doing and came out to talk to me when I asked for help. They went out of their way to search their personal cars for a charger and offered to let me use their phone in the meantime. Because of their kindness to a stranger, I made it back to return my car rental within 5 minutes of the deadline. I will definitely be calling this place next time I have engine care needs. Thank you Ted's!

Theres a reason this business has 5 stars and I can see why…read more I was referred to Randy for cylinder head work for my Corolla. Consulted him with what my issue was and told him what I wanted done and he tore the head down and was able to tell me what he found and gave me a very fair price so I approved it and got my cylinder head back looking brand new. He was also very helpful for talking with me trying to figure out the noise I was hearing from my motor before I took it apart. Thats when I could tell he had years of experience under his belt. In the end the refresh to my head and motor was all it needed and I'm very grateful for Randy's work and knowledge.

I had overtightened a reverse threaded impeller bolt that was attached to a pool motor. The head…read moreof the bolt had started to round so I couldn't unscrew it. I brought the motor to Rk Industries and asked if he could loosen the bolt. Fortunately for me the bolt also had a flat head screw driver head as well. He worked on the bolt a little bit with an impact driver and was able to loose the bolt enough so that the impeller would come off. Like the earlier commentor, this business is hard to find as it is located amongst several other commercial businesses. The cost of the service was very reasonable and if he wasn't able to get the impeller off, I was looking at purchasing a new impeller and a new backing plate to attach to the new motor.

Best machine ship in Hawaii. Great attention to detail…read more Matt is friendly and helpful. Needed a part fabricated and had it in one day. Highly recommended.

If you own a boat do NOT go here. He LOVES to make fun of boat owners for spending tooo much on…read morerepairs. He is quite the rooster about it. ALSO he swears he can't polish a chain plate - says can only be done on mainland - whiskey tango foxtrot? His price quote was only a bit higher than universal Btw... universal does polish chain plates ON ISLAND!

Reasonable prices excellent customer service and clean environment. David and his team are the best…read morein town

Amazing shop. Dave and the crew brings awesome customer service. Went in looking for 4 new tiers,…read morefound umm for a good price. Made a appointment for the next day. Showed up and they bang that bad boy out in 2 shakes. Fast service and my truck got some new shoes on yessaaaa. Mahalo Dave & Mod Industry

Mahalo Chris for the Professionalism on the repairs on my Truck!Looking forward to doing more…read morebusiness with you.

CK Springs is great for fabrication. Chris is very smart and could build anything from scratch!read more

Everything went smooth i called about 20 shops, motorcycle dealers included and none of them would…read moreeven consider working on my bike (i had a snapped bolt in my aluminum swing arm) and when i called moo's i was told to bring it right on down. "Chelsie" was very friendly and professional she answered all my questions. it definitely wasn't cheap but i understood that going in. I will definitely be using moo's again if i need heavy duty services!!!

Took my wheels in to get estimate... female lady look at my wheels and said that can't do it…read more They're scared of the structure and safety. I wanted to go from 60.1mm to 67.1mm wide and apparently 7mm seems too much for them to bore out. She out right said they can't do it so I respect that, but then again I'm thinking because my job is too small for them, they don't even want to touch it. They did recommended me to a smaller machine shop down the road.