I just moved to this area and they recommended me a sports bike shop down the street as they don't…read morework on sports bikes Thankyou for being so helpful and friendly.

These guy are straight up. They installed racing suspension on my Harley, and fluid change. The…read moreprice was fair. They don't overcharge or try on up sell up. If fact, if you don't need it or the is a better less expensive part, they tell you. I will be going back for all my work. When they returned my bike, the adjustments were spot on, it was like a new bike again. Thanks Guys

Angelo is a very talented and knowledgeable guy. He knows his Harley's, takes time to answer…read morequestions - in detail and helps you understand your bike even more than you did prior to bringing your bike to him. You can see it in his work but also hear it from him that he takes pride in his craftsmanship and with your bike. I took my 2013 V-rod Muscle to him with neck bearing issues and for them to install new tires. It was quick getting my bike in and out of there at a reasonable price. I had used Destination HD in the past for some work and parts. When I went looking for new tires before this latest set I went to Destination and the parts guys visually inspected the tires on my bike, which were Scorcher 11's. Apparently he forgot that fact between my and his parts book and ordered a Scorcher 11 front tire and a Dunlop Elite 3 rear. Then the tech at Destination HD installed and test drove my bike. To my defense I assumed all was good when I ordered them, picked up the bike, took it home, washed it and that is were I spotted their mistake. Actually 2 mistakes, 1. The parts guy ordering mismatch set of tires and 2. The HD tech not spotting or making me aware. Never again for me taking my bike to Destination HD. The only reason I convey this little story about Destination HD is when I brought my bike to C & A Customs, He ordered and installed the correct set of tires (Michelin Scorcher 11's) and replaced my neck bearings because they were toast. He even kept the neck bearing and showed them to me and the bottom one was toast. See pic posted.

I almost never let someone work on my bike, but when I lost my transmission and was short on time I…read moreheard about C & A from one of the local clubs and I gave them a call, told them what my issue was and that I had already ordered the new gear set. Angelo said he could get me In quickly and the the next day his employee Travis (really cool dude) came to pick up my bike. I'm an impatient bastard and was itching to get back on the road quickly and called a few times and Angelo always spent a minute or two going over where they were at with installing the new transmission. When I went to pick it up he showed me the old transmission and walked me through how it broke. The bike now shifts better than ever and is running smooth. Final bill was less than what I was expecting. These guys do great work at a fair price, and everyone I met at the shop or talked to on the phone was great. I'll definitely be having them dyno my bike this winter. I highly recommend them.

Worst repair job ever. I would allow this repair shop to My Triumph didn't run $120 later it still…read moredidn't run when I picked it up. I took it to Bates technical college where they did a diagnostic where they found the started relay non-functional and the gear that spins the engine was stuck. The instructor explained to me that a reasonable good mechanic should have been able to diagnose problems, relay and gear and made repairs for $1000.

I would give this place negative stars these guys have had my bike for two whole months to replace…read moreone task that should have taken them 2 hours max to fix but instead they been giving me the run around and fixing the clutch on my dirt bike, the communication sucks from them, no drive or commitment to getting your stuff done correctly or on time I highly recommend going somewhere else shiiiittttt anywhere else but here.... btw I still don't have my bike so that should tell you something and I gotta keep calling them about it and they give the run around im pissed off!! they have had my bike the whole last part of the summer while they kept saying they would be done next week and that week still hasnt came yet!

They did an amazing job with taking me in last minute, and helping me get my tires switched out.read more

I was attempting to purchase a new bike from Jon B. Within a few emails my trade in bike increased…read morein value $1,000 but only for one day so the pressure to buy immediately is how he works. I have several bikes, I buy new toys frequently and it was disappointing to come across that "used car salesman" mentality from years ago. No games would be a nice way to do business but that was not my experience with SoSo cycles.

No bull shitter. Honest and reliable. I've been taking my bikes here for over a year and will be…read morecontinuing to come back! Prices are honest and fair. 100% recommend! Also can get your bike prepped and ready for WMRRA.

I took my new 23 S1000RR to GixxerTek to install a new Exhaust, ceramic bearings and some other…read morethings, and I'm extremely happy with his work. His attention to detail is second to none, and he notes anything wrong with my bike. My dealer didn't tighten a few screws on my bike before I dropped it off at gixxertek. I'll always take my motorcycles to this shop for any work I need done. I really couldn't be any happier with his work

Awesome experience! I contacted Corky about getting some basic maintenance done on my 2001 Yamaha…read moreVStar 650. I was especially interested in the DIY experience. I'm a long time mechanical tinkerer (is that a word?), and wanted to become more familiar with my bike. We set an appt. and I purchased the necessary parts at the local dealer. She arrived early and after a brief discussion of what we wanted to accomplish, she handed me a wrench and we got to work. She allowed me to do almost all of the work under her careful supervision. It was a fantastic learning experience. I loved the hands on, and now feel confident that i can tackle a few more jobs solo. I also know I can call her if I get stuck in the middle of something. Corky offers 3 styles/levels of service: DIY - You do as much hands-on as you feel comfortable with. Watch/Learn - Corky will perform the maintenance required and teach as she goes. You are welcome to grab a wrench and join in. Hands Off - If you don't like getting your hands dirty, let Corky do the dirty deed, and you can ride off into the sunset! What you need: A garage or safe (covered) place to work, a shop manual for your bike, and parts for the service. Corky will bring all the tools and knowledge. I highly recommend Corky's Motorcycle Service!!!

Corky does an excellent job at teaching the basics. She ensures everyone in attendance is given the…read moreattention they need and her knowledge is great. I must say the Corky will even go out of her way to help you search for a needed part, information, or even a hard to find service manual. I highly recommend Corky's Motorcycle Service and will use her services again.

I have seen his work and have no issues letting him work on my 06 CVO Fatboy or 16 Roadglide.read more