Best automotive machine shop period.. These guys really know…read morewhat they're doing and build some of the best motors out there. Their super knowledgeable, friendly staff, are more than happy to hold your hand through your whole build. They have done a few of my engines flawlessly. I don't know about you, but trusting who builds your motor is a pretty serious decision to make as far as I'm concerned. I'd let these guys pack my parachute. Nuff said..

AVOID THESE GUYS AT ALL COSTS!! NO COMPENSATION AND ACCUSED ME OF POSSIBLY ATTEMPTING TO SCAM…read moreTHEM!! I had Alec's Machine Shop disassemble a pair of vintage 1976 Harley Davidson Shovelheads from my original numbers matching Police Special FLH. While inspecting the heads, minus the valves, springs, and valve guides, I noticed the guide "boss" hole on the rear head, looked "beat-up." Upon closer inspection and measurements, it was blatantly evident the "engine builder" neglected to remove the heavy carbon deposits from the portion of the valve guide behind the valve. He hit the front head exhaust guide with such violence while trying to remove it from the head, that it broke a third of the guide right off, and then actually managed to drive the rear head guide (with all the heavy carbon deposits still attached), through the aluminum guide hole boss, tearing up the hole and rendering the damage beyond viable repair. My initial phone call to Alberto (company phone-answerer), to tell him of the damage I had found, was met with instant incredulity, and doubtful accountability. I took both heads in to have the owner's of the establishment scrutinize the findings; again, met with instant proclamations of prior damage, to minimize, if not eliminate, any compensation. All 4 guides (iron), measured .565", (including the guide that came from the now torn up guide hole, measuring up to .593"), and 3 guide holes measured the same (.565"). The damaged exhaust guide hole measured between .570", erratically up to .593". The hole was now "egg-shaped" and off center. The repair would cost a minimum of $850.00 before tax, and could only be performed by an extremely experienced machinist with the right tools, of which this shop was NOT qualified to perform. When all was said and done, no compensation was given, and they basically accused me of attempting to "scam" them, as they claimed that the broken head "may not even be the head they disassembled." After having my 35 years of vintage Harley experience minimized to novice proportions, I couldn't take the inability of these people account for their incompetence. I left feeling completely defeated, never to return.

Great results from Craftsman collision in South Surrey…read more Everyone who we dealt with and those who did the work were professional and courteous ( singling out Scott, assistant manager, Danny, auto-body technician, Ross, painter, and Cassie, front receptionist). All repairs looked great, making my car look perfect. My car was returned to me shiny clean inside and out and smelling great. I highly recommend this location for anyone wanting a job well done. Happy customer.

Poor communication. The shop continued with repairs despite being asked not to start. The costs are…read moreexcessive. They should have provided a detailed estimate and obtained customer approval before commencing any work.

After hearing about monster auto lab on my local car clubs forum, I brought my Audi in there for…read morescheduled maintenance and brakes. Their response time was extremely quick with a competitive quote. Upon arrival they quickly assessed that only the rear brakes needed replacing and had the car ready for pick up by noon the same day. I'm very impressed with the pricing and service, will definitely be back!

Recently purchased the Tesla Model Y and heard from a few YouTube reviews that the paint on the…read moreTesla can easily get scratched so decided we wanted to get our car wrap. Initially we were going to go with the protective film however seeing previous cars that Monster worked on we decided to wrap our car in Satin/Matte Xpel Stealth. I am sooooo pleaseeeed with the work completed by Monster. Richard and the team were so amazing and sent me photos along the way. It was completed as schedule and the team gave us all the information we needed. They were honest and upfront about everything. I'm very happy with the overall look of my car and I won't lie...I stop to admire it at every chance I get. I highly recommend the team at Monster - your baby will be left in great hands.

I was looking for a place to install a spoiler for my car. To be honest, I don't know much about…read morecars and all the technical terms. I became interested in cars after I started playing a video game called Grand Theft Auto 5. While I was modding virtual cars in the game, I started wanting to do that for a real life car! Haha. As a student on a budget, I'm not able to afford fancy cars or do expensive modding. But I could do something within my student wallet means on an older car. I decided the first thing I wanted to do was add on a spoiler. I talked to one of my car-loving friends and he recommended Garage Five Performance Tuning to me. I emailed Garage Five some inquiries, and Rob was polite and professional in his replies. I think he's the owner or manager. I bought a spoiler for my car on eBay and had it shipped from US to Canada. I was a bit nervous about this because I've never done anything like this before. I was really careful and did my due diligence in making sure it was correct for my car model and the factory paint matching the vehicle -- and I had emailed all of that to Rob. Rob was very helpful. He was transparent about pricing and on the time needed to install it. The staff at Garage Five were very professional, friendly, and did a wonderful job installing the spoiler onto the car. They found a defective problem with the spoiler lights (which would be the fault of the eBay seller). I've uploaded a photo of the car spoiler. My car isn't yellow, I changed the color for privacy reasons. Thank you, Rob and Garage Five team!

I have been a long term customer and have bought my Acura and then my Honda to Garage Five. I am…read moreextremely happy with excellent customer service from Richard and Rob. Needless to say Garage Five has extensive products for my vehicles and at a competitive if not very reasonable costs. You guys are fantastic and my go to place to go for performance tuning.

Solid 5 stars. I go to AHM every time I need any cosmetic or engine repair and Chris has never…read moredelivered anything but consistent quality work. I definitely recommend it for everything car related.

The service at AHM is great! I took two cars there for servicing/maintenance recently and my…read moreexperience was very pleasant. Unlike other car shops I have been to ,AHM kept me in the loop as to what my cars needed throughout the process. I was given the exact price about the parts and labour too. In addition, they also included a 'recommendation' section in the bill that tells me what my car might need the next time I come in...which is some I enjoy as I can have an estimate how much I will need to spend the next time I come in. Service was fast too and the price is very reasonable! I would definitely recommend my friends to AHM =).

Highly Recommended…read more Quality service by a quality team.  Jan's Precision Auto Body is absolutely amazing! They are a wonderful family group providing EXCEPTIONAL service to the community. Recently, our Mercedes was rear-ended and we needed some body work done; naturally we were in distress over the damage. Michelle's kindness has a way of letting you know that everything will be more than alright.   Not only were they able to find parts that are difficult to find, they returned the car in a condition that is better from what they received.  It was immaculate inside and the body work done is BEAUTIFUL. If you're looking for quality work, honesty, customer service, professionalism and skill don't waste your time anywhere else. Go see them. There service isn't exclusive to Mercedes-Benz either.  Michelle and Team: Thank you for looking after our family. It was an effortless process working with you. We knew the car was in good hands in your care. I can't recommend you guys enough.  Thank you.  Bushra & Mike.

Couldn't recommend this place more. The people there went above and beyond to help my family; they…read morereally care. Best auto body shop in Langley!! Thank you Jan's !!

Mikol is awesome. He was the only mechanic I could find to walnut blast my intake on my 3.5…read moreEcoBoost, a service I highly recommend on all GDI engines. He did a great job and price was beyond fair. I needed my stabilizer links replaced on my RX350. Mikol got me in and out in an hour, great work, and again great value. I highly recommend Mikol, small shop but great work at a fair price, and all backed by a quality warranty. Go see Mikol, you will be happy you did.

If I could leave zero stars I would. What ever you do DO NOT DO ANY BUSINESS WITH MIKE!! He is two…read morefaced! He acts nice and knowledgeable, doesn't really know what is going on.. was supposed to be a simple easy job that HE turned into a nightmare! Oh, DONT question anything cause he will blow up and start accusing YOU of shit!! But when it comes to payment is where you will really find out who he is. He will over charge, not just a few bucks. But you're not allowed to ask why!! Have fun there.. don't have to listen to me, you will find out if you go here. Willing to bet, his good reviews came from friends and family who have never had any work done. Also willing to bet he will say the same thing he has to everyone else who has left an honest review.. "I don't see you in my system, you have the wrong place" I have the right place Michael Finney owner of Mikol Garage

I had a wonderful full experience with Burnaby Hitch! We…read morehad made an appointment (or two) with U-Haul and they screwed us over by making us come out when they didn't have an installer on-site. Nor did hey have one for the rest of the week OR weekend. Their bet advice was to take the parts from their store and go to Port Moody 3 days later. Needless to say, I called around and found the receptionists at BH extremely knowledgeable and helpful. Plus they broke down the price points for me to explain why they were a little more expensive than U-Haul. We brought it in that afternoon while we ran other errands and they had it finished (beautifully, I might add!) within a couple hours. We have our trailer hooked up and couldn't be happier!

I spoke with BH and they explained the rational for not using the factory supplied trailer wiring…read moreharness. Apparently in pre-2018 Sprinters, if a brake controller is not installed, the factory installed harness's converter is not powered and thus the harness does not function. Okay, that's a plausible response and this was unknown to me before they explained. I wish I had understood this at the time as I could have opted to use a simple 7 to 5 pin converter right at the plug to the trailer at a similar or less (?) cost to having them go to the labour and effort to access the taillight wiring. I also don't quite understand why simply powering the factory trailer harness without a brake controller if a 5 or 4 pin trailer connection is installed was not considered as this would have been a simple matter under the drivers seat. Regardless, I appreciate their explaining their rational but I would have done things a bit differently had I more information. Regarding the quality of the wiring work, it was a bit sloppy, and a short single conductor was spliced to lengthen with a different colour wire hidden under electrical tape. The harness was also routed into the interior of the van by breaking off the corner of an interior plastic vent cover behind the taillight and a hole drilled through the floor rather than route the harness out the bottom of the taillight and behind the exterior trim. Again, not terrible and still functional but in my opinion, there was a better way to do this. Finally, the factory harness was dangling under the the van and did not have a blanking plug or any protection to keep water, salt, muck out of the plug's terminals. Maybe this is how Mercedes delivers the van but it necessitated cutting off the plug to access the bare wires directly if the plug is not utilized soon after delivery. I will add a star for BH reaching out to explain and I hope that my response assists with their review. Addendum: BH is correct, I'm doing the wiring for the new 7 pin hitch myself. I figure as a marine electrician with over 35 years in the industry and owning my own marine electrical business repairing and designing electrical systems for million dollar yachts and others I both recognize quality workmanship and have no issue tackling this little project. It does however make me a bit more critical than other people of such things and my standards for workmanship may eclipse others. I'm sure BH is a good company and clearly has demonstrated their willingness to communicate. Yes, the plug was functional until it failed a few years back and I replaced it with another 5 pin style. It's only now that I have a trailer with electric brakes that I looked at the original work to make the necessary plug style changes. If I could offer 5 stars for communication alone I'd do that and I would recommend them as they are certainly willing to listen and I suspect, had the discussion at the time been in more depth, I would have been clearer in my expectations and direction. So as a result, both BH and I are a little wiser.