Jeremy helped my wife and I with a super odd project where we needed to shorten a patio heater…read more It required him to cut the main pipe and then drill some holes so we could still connect the heating element to the top of the pipe. His work was on point and he was a super friendly guy. I'd absolutely return to for a future project. Highly recommended.

Excellent response, assessment, feedback, and welding replacement of 5 individual rusted feet on…read moretwo wrought iron railing decks. I sent photos by txt and he responded with a quote. He sent Jacob to do the job, and it was finished in one afternoon for a great price just as quoted.

Very professional work done very fast . Came to the guy to…read moreweld aluminum casket. Fedal was very professional and suggested couple ways of doing the job very creative I must to say . The cost was very reasonable defiantly will suggest this place to everyone.

I needed a stainless steel Tig Welding on my stainless steel frame machine , The machine is very…read morerare and i can,t find a parts for the extension arm, I finally called AmStar welding and they say just explained my situation to them and say the best way they can help is to see the broken arm , I came to the shop and it was very friendly Fadel looked at the arm and said no problem do you want to wait or come back later , I waited about 15 minutes and i had my part done , These guys are masters in what they do , Thank you AmStar for a job well done. pops

These guys are just simply good " They will seem…read moregritty-tough) at first but it is the norm for welders. They listen carefully and deliver. They will/can do anything you present to them...even if is a first or they will tell you right away . No hidden surprises with this place...they are not afraid of work and know what they are doing. What a neat place to have in city heights..in fact , this may the only place like this in city heights. They can do custom work...just present them with a drawing and or your Ideas 5 Stars all the way...

I had a broken gate operator with a rusted pin. To fix the operator I needed to remove the rusted…read morepin. I spent 2 two weeks applying penetrating oil and the pin would not budge. I can to Sam's in about 15 minutes they had the pin removed. Great service and great guys..

I bought an older sailboat that needed some upgrading. The bow pulpit's design led to jib sheets…read moregetting caught in it when gybing, and at some point it must have impacted something, being slightly bent downward and off center. I went to the marine welder I'd used for years over three different boats and was told they were too busy doing bigger commercial jobs to see me any sooner than two months out. I decided to shop around and was pleasantly surprised to find Benchmark Welding very nearby, and willing to take on my project immediately. The reviews were good, so I removed the pulpit, delivering it to the Benchmark shop the next day. Right away, the estimate for the work came in at HALF of what my long-time welder quoted. One look at his shop told me I was dealing with a meticulous professional. The next day I was called to advise that the pulpit could be straightened to a point, but the way it was bent might not allow correcting to perfect symmetry. I agreed that his eyeballing the curvature of added stainless tubing to the best look possible was acceptable. In another day he had me take the pupit back to the boat to check fit and photograph it. We decided to raise the front higher, and even with an added change to nav light placement, it was ready the next day. The look was better than I expected (I got positive comments from the dock minutes after remounting it on the boat), the welding and polishing were top notch, and the attention to the intricate points of metal fabrication in a marine environment were well addressed. This is a very professional shop offering expert work at a reasonable price. I wiil be taking all future boat welding projects there and heartily recommend Benchmark.

Benchmark, (Matthew) is a true professional and an artist at his trade. If you are interested in…read morequality, in craftsmanship and up-front honest transactions this is the shop for you. In the boating world there is no room for anything less! I highly recommend Benchmark, (Matthew), and his craftsmanship for any of your welding and/or metal fabrication needs.

Gate replacement at the American Legion Veterans Hall, was easier than expected. Fabio of Fusion…read moreWelding came out with books and design ideas and listened and suggested until every veteran was happy with the final product. We are 100% satisfied. The most reasonable pricing. Excellent quality work.

Excellent fabrication of a new metal patio gate just installed. Fabio and crew did a great job…read morealways keeping me informed of what they were doing. Always timely work from start to finish.

I had a delicate key barrel from a vintage car that needed work. The set screw had to be drilled…read moreout, retapped, and a new screw installed. Wild Bill and Linda Sue are an incredible team! Bill handled everything I needed with outstanding quality at an amazing price. His craftsmanship is flawless. Highly recommend them if you need any drilling done!

Done two small custom jobs for me and the work was excellent and he even gave a free opinion on…read moresomething that saved me from a likely headache. I have been around this stuff professionally for years, and after meeting him and touring his shop, I am willing to bet money that this guy is a master model maker. in fact, i will be betting money since i am definately going to use him for my production tooling. and as far as the other guy commenting on the wife, she has been 100% fine with me.

Quality Small Buisness. My Rod iron fence needed some love. I really appreciate the Response,…read moreQuality and Price! Good People cost a fair price!

The steel grate on the storm drain on my private street rotted out and collapsed. I called Greg…read moreand asked him if this was something he could help with. He told me he had done similar projects and to bring it in. He looked at it and said that he could fix it and would also paint it with special paint so it would last for the next 20 years. The price he quoted was very fair. 2 days later it is done and looks better than it probably looked when it was new. I highly recommend Greg. He is a craftsman who does excellent work and takes pride in it. He is also a nice guy that is easy to work with. If I ever need anything welded or fabricated he will be the one I will call.

I have waited seven months to write a review of the custom gutters they installed on my house. My…read morereview is as follows: 1. Price: I think that the price was good for the custom gutter work that they accomplished. 2. Work Quality: It is raining today, and I have several leaks between the roof tiles and the gutters that are supposed to catch the roof runoff! I did point this out to them after they completed their work via text and received no response. 3. Communications: They routinely ignored my calls and texts. I even had to go to their office only to find it closed. We also had one shouting match over the phone. 4. Reliability: On numerous occasions I complained that his people did not show up as scheduled (they were routinely sent to other jobs). My original two weeks work lasted six weeks. On one occasion the owner (Art) texted me to say, and I quote "stop being a baby" when his people failed to show up for three days.

Outstanding service, nice work, and a very reasonable price. I reached out to Newest sheet metal…read morewith a request for a quote to fabricate a chimney cap and received a response within a couple of hours. I confirmed my dimensions and approved the very reasonable price quote and they actually had it fabricated the same day. I picked it up the next morning and and was very pleased with the quality. I have been in construction for over 40 years and I can confirm that this level of customer service is extremely rare, and in today's market - unheard of. And on top of that, Art who owns the business and runs the shop and his wife who handles the paperwork are a couple of the nicest people you will ever meet.