Henningsen did a wonderful job on two chairs and a small bench. the quality is excellent and both…read morethe cost and the time estimate were exactly as promised. Collette kept us posted on progress and made all the arrangements. She is a great communicator!

We inherited an antique dining room table and six chairs from my husband's grandmother that needed…read morereupholstery, and the table and one chair needed some fixing. The staff at Henningsen were friendly, helpful, and accommodating. The shop has a vast selection of material to choose from. Once I chose my material, I was given an estimate, and the very next day my table and chairs were picked. Within four days, all six antique chairs were elegantly reupholstered, and the table once again sturdy to entertain dinner guests. The owner, Scott and staff (Colette, Fidel, and Jose) provided knowledgeable one-on-one customer service, quality craftsmanship, and went beyond my expectation as we are celebrating my husband's birthday with a dinner party within 10 days of my first visit to the Henningsen Shop. I highly recommend Henningsen Shop to reupholster your family heirloom. Doris T.

Chris's Precision Machine is a true full service automotive machine shop that offers the very best…read morein machining capabilities and accuracy. The level of service and experience is unsurpassed. Attention to detail is certainly a trademark for this shop. The part I receive looks NOTHING like the part I dropped off. The parts are always cleaned and look brand new upon receipt. I have never had to return anything for rework. These folks can service everything from a simple pushrod domestic product to expensive, over head multi-valved per cyl imports. Some of the services available include but are certainly not limited to: -Cast Iron magnaflux inspection -Aluminum cyl head pressure inspection -Aluminum Cyl head straightening -Brake Rotor or Drum turning -Full Cylinderhead service and repairs (Hardened seat installation, spark plug thread repair, surfacing, drill and tap for threaded rocker studs, combustion chamber cc sizing etc) -Engine Block service and repair (torque plate cylinder boring, align hone, deck surfacing etc) -Intake manifold service and repair -Custom work is available for those who want modifications ie:cylinder head/intake porting, rotation assy balancing Chris has years of experience building stock and high performance engines. I am a happy customer with multiple engine built by him and his staff. These folks will certainly earn your trust and repeat business!!! Customer Service = 5 stars Aptitude = 5 stars Attention to detail = 5 stars Communication = 5 stars Pricing = 5 stars Honesty = 5 stars

Chris did a fantastic job servicing the head for my Massey Ferguson tractor. Great guy, fair…read morepricing, beautiful work. This is my new go to precision machine shop! Thanks Chris 11/20/19 UPDATE: My Three cylinder diesel Perkins motor is running better than it ever has. I attribute much of this to Chris's recommendation to going ahead and doing a valve job in addition to surfacing the head. I'm so happy! Thanks Chris

These guys kick ass super helpful, super fast best guys in town bring them any problems You got…read morethey are metal masters.

We came here on a recommendation early February. When we came, we spoke to the owner (Braulio…read morePeralta) and asked him if he could make us a food cart. We brought a picture of a cart we wanted. We explained to him that the company who makes the cart isn't taking any new orders as they are behind over 6 months. Braulio, told us he can do it. He said, he's done food counters for Cannery Row food establishments before therefore knows the rules of needing to use food grade materials. We explained to him that that is the most important thing for us because that is the only way the health department would approve a permit - any material touching food needed to be NSF approved. He said no problem. He then told us that for him to copy the cart from the picture and specs we brought in, it would cost us between $7-$9k. We agreed and asked him to proceed. He also told us the cart would be ready by March 1st. At the initial meeting, we brought in pictures and gave him the specs. We have him the link to the website of the cart we wished duplicated and sent him many pictures from every angle of this cart we needed built. The next day, we brought a trailer for him to build the cart on and he said he didn't want to use that cart and he would prefer to build the cart but it would cost us another $1k. We agreed so he can get started on it. We came to the shop to document the process of building so that we may post it on our social media page as well as keep our donors (who contributed to a GoFund me) informed about the progress of getting a new cart built. After about a week, we came back to the shop and saw that he had built us a new trailer. A huge trailer and definitely much bigger than the specs we gave him. When asked why that size, he said, it's to make sure the cart remains stable. He continued on with the build and after a couple Of weeks, which is when he said it would be done, we came by the shop and saw that he had built the structure of the cart and again bigger than what the specs we gave him. We told him we couldn't have it that big and he used that as the reason as to why it wasn't done on time. He said because of the modification, everything got set back. Everytime we came to check on it, we saw something that wasn't part of the original plan. Everytime, he assured us that he knew what he was doing and that the way he's doing it is much better than the picture we showed him. What was supposed to take a couple of weeks to build, took over 2 months. In the end, we ended up with a cart that isn't even operational as a stand alone. The only way the griddle feature works is if we insert a piece of metal to lift it to give it proper ventilation. No lights were installed, the doors don't work properly. We didn't ask for him to use doors with locks, he did that on his own and then wanted to charge us for it. They don't close and open right, the burners do not stay on unless all the doors are left wide open which gets in the way of our operation because it wants to constantly swing open and shut. The iron frame trailer he built, is rusting daily because it was never primed and painted. The shelves are useless to us because everything that goes in it gets damaged when the burners are on because of the heat and there was no insulation installed between the stainless steel walls that surround the fire. We tried reaching out to him after we picked it up to let him know about those problems and he ignores our messages and emails. We're unable to operate due to the fact that the cart will not pass inspection due to those issues that should not be there with a properly made cart. Forget that they built as a cart that they wanted to build their way not the cart we wanted built, still, it does not work and we aren't able to operate it currently. I would not recommend this shop to anyone. I would also get a contract and something in writing about everything agreed because they have no integrity.

THEY S U C K! At best they were having an epic…read morebad day. At worst they are completely disorganized and/or incompetent If you need machine work done find anyone else I'd give 0 stars if i could. But then........ I'm biased I needed bearings and races pressed into a fitting. I supply all parts. Them - "You'll have it tomorrow" Me - "sounds great. Oh yeah, this arbor here - this one right here - it's critical that it projects enough so that the flange doesn't rub on the fitting." Them - "Got it" (Scribbles a sketch) Me, tomorrow - "Hello, is it done?" Them - "maybe around 4:30, if not, then by the morning." Me - "not a problem" Me. the next morning - "is it done?" Them - "The grease fitting broke. We're drilling and tapping and replacing it right now. Have it done by 1:00p" (Grease fitting not part of the original plan) Them 1:00p - "part's ready come pick it up" Me (there) - "here to pick up my part" Them - "Do you have a spacer? We pressed the arbor too far into the bearings. It rubs, but if you have a spacer it will work." Me - "SPACER!?!? No!! There's no spacer" Them - "No problem. We'll just press it back through. Another 20 minutes" Me (20 min later and not happy) "Well, I'm back" Them - "That's $100" Me - "$100!?!? You quoted me $50-$70" Them - "Well we had trouble with it. the $70 was if it was easy" Me (to myself - 'well it's done, I can get on with my life') - "Here's my card" Them - " It's $100 cash. It's $140 on the card" Me -"What!!!" Them - "There's an ATM down the street" Me (to the ATM and back. Now pissed) A quick exchange of money and parts and I'm gone. I don't even want to talk to them anymore. I'm DONE! Get home, start laying parts out for reassembly........... THEY PUT IT TOGETHER B A C K W A R D S !!!!!!!!! Me (on the phone) - "You guys are a day and a half late. You charged me $30 more than I was quoted. And it's Fucking WRONG (for the 3rd time)" Them - "Bring it back we'll fix it" Me (14 miles and 25 minutes later) "You did it backwards." Them - "We'll give you a call when it's done" Me - WHAT? HOW LONG IS THAT GONNA BE Them (no eye contact, shuffling off to confer w/ coworker) (5 min later) - "About an Hour. We'll call you" Me (53 minutes later) - "...........no...........words........" Them (nothing)

I have a small company that makes machinery parts. I've bought stainless from these guys a couple…read moreof times, they sell for a reasonable price. I noticed they have quite a bit of blue UHMW also, which is hard to get. They cut my material the same day. I was very satisfied.

As a fabricator/welder, I work with Dustin at Dela's periodically…read more He's experienced in a wide variety of metal welding and metal fabrication areas. Now wonder he's busy and in high demand! Dave Osland, Aptos

I had just bought a used dirt bike for a friend. The heat shield was broken off the pipe. I took a…read morechance and called them.....they were super cool. they said swing in and we will take care of it. They did a great job even painted the welds so it would not rust. I asked how much and they said how about a couple of hamburger lunches.....I handed them $40.00 and was off all in less than a half hour. Use these guys they are great.

I needed some material centerless ground, and got a very good quote, my parts were returned…read morepromptly, and all of the parts were in tolerance.

From the owner: We specialize in centerless grinding and cylindrical grinding to within .0001" of your…read morespecifications.