Quick, friendly service. Parking is terrible. Pricey for a single cut and polish but the job is…read moredone. Had a 12" x 12" x 1/4" steel plate straight cut to 9"

I needed a steel frame to support a DIY concrete countertop pour. Given cabinet measurements are…read morefairly precise I needed this very precise to make sure I can place it inbetween cabinets and not interfere with appliances. I wasn't sure who to go to and looking through various reviews and websites Steel Werx looked like the kind of place that could help me out. On the phone Pawl was reassuring and asked me to come in with the plans I had sketched out. I came in that morning with this very rough draft I had drawn up by hand. Pawl studied it and asked some very succinct questions that showed he entirely understood what I was trying to accomplish. He made some recommendations that I agreed to. Discussion only took about all of five minutes. Surprisingly, he said he could have it done by the afternoon! Before he finished the project he called to let me know he thought my plans had an error for what i needed and indeed he was correct. This had to do with the placement of screw holes that would have not aligned correctly with the cabinets. Again Pawl completely understood what I needed more than I did in a way because he had never seen the cabinets this frame was going inbetween. I had measured my frame out to the 16th of an inch and when I went to pick-up the finished product all the measurements came out to the 16th exactly! The price was a little higher than I had hoped it would be but in my experience craftsmanship like Pawl's is worth every penny. Pawl offered correction to make sure it was right but I didn't need it. It was right the very first time! I couldn't be more happy. This work eliminated a major headache I had with my overall project and the experience was excellent.

He's the guy to go to 1000% Awesome work and cool guy to work with. Definitely will recommend him…read moreto anyone I know. Best turnaround time as well.

So my second time here and this guy never sease to amaze me .I broke the weld on my aluminum boat…read more Came here and back on the water in less than 1 hour

Been here a few times with my buddy but today I went alone because I needed something cut. The…read morestaff asked if I needed help and I told him what I needed. He crunched some numbers, found it it's cheaper for them to cut it for me vs me buying a bigger sheet and spending my own time cutting it to spec. They saved me hours of work for something that may not have turned out as nice as how they cut it. It took about 20 minutes and the gentleman was nice enough to walk out to the parking lot to find me and let me know. I parked in the back and they brought it out to my car. I changed the specs last minute and they accommodated that too. My buddy told me everyone here is helpful and nice and that's 100% the truth! Everyone here is so nice and polite it felt like I was at a resort. Companies like this will be around forever because of staff like this at Industrial Metal Supply.

I called ahead and told them I wanted two 1/2 inch stainless steel square bars cut to 24 inch each…read moreand I got quoted a price at $36. Awesome! I rush there after work before closing and they quote me at $60 cause they charge for the cut. Why wasn't I quoted the cut price too when I called in and told the dimensions. They ran out of 3 feet uncut ones for me to cut myself but the worker was at least helpful trying to find leftover stock. Otherwise I had an issue with whoever I talked with over the phone that misquoted the price and wasted my trip.

Had them cut into gate and place a sturdier USPS Key Keeper. Great job done on time and at a very…read morereasonable price. Highly recommend them.

Very professional, the quality of the work was excellent, and his communication was clear. I would…read morework with him again.

Brian took on the job of replacing a cracked lift off hinge needed for my aging sailboat. It was a…read moresmall job for JP but an important one for me as I was unable to source a replacement for the 35-year-old cast part and it was a critical piece used on the entryway teak doors. JP and Brian came through with a precise stainless replacement part. Cudos to their customer service and attention to detail. You'll not be disappointed when choosing them for exacting work.

These guys do amazing work. We outsource our fabricated…read moreparts to JP metal fabrication because of the quality, price, and quick turnaround.

Thank you Nick for doing my small job, your awesome. When I need more work done, I'll be back.read more

I had a 1945 kicker cover for my Harley Davidson that I damaged. Unsure if the job was too small…read morefor his shop, I went to Nick not knowing what to expect. Nick greeted me with a fantastic attitude and enthusiasm. He explained what needed to be done and assured me he had the best welders. A few days later, I got a call that my part was fixed. Nick is very helpful and has great work ethics. I will definitely be returning.

We have been doing business with Magnum machine shop for years and we are very satisfied with the…read morelevel of service we have always received and quality of work that that is delivered with the final part.

Robeck's has earned the high ratings they get. We had a hospital bed widened about 8 years ago,…read moreand the workmanship is of the highest quality. They know what needs to be done, and they take pride in their workmanship. I recently asked for their help to order new casters for the bed, and Sam guided me through my options (at no charge) so that I would order the appropriate replacements. When the casters arrived, they sent their guy Jimmy to our house to replace the casters on the bed. These guys are extraordinarily generous with their time and expertise. All of the people I have encountered at Robeck's are respectful, ethical, and kind. I can't imagine getting better service anywhere.

I needed a steel shelf built for my work truck, this place had great reviews and they did not…read moredisappoint. Their friendly staff was more than willing to help, came out to my van took measurements for me and made a drawing of what we needed and were more than willing to get it done quickly and skillfully. The shelf was ready in about a day and I got a call that I could pick it up anytime. It was exactly what I needed and I couldn't have been happier. Then a few months later I needed something powder coated i gave them a call, they don't do powder coating but were still super friendly and hooked me up who they use, SRS Industrial Coatings in Santa Clara, and they are just as wonderful! Thanks for everything you are our go to for fabrication needs (I keep coming up with plans so I am sure you'll see us soon!)

I had a project where I needed custom cut piece of sheet metal to create a magnetic whiteboard for…read moremy kids room. My contact at A & J was Suki, who listened carefully as I explained the application and then made some recommendations about the thickness of material and quoted me a very fair price. When I picked up the piece, I was surprised to see the attention to detail on the finish. Although I had not asked for it, all of the edges had been rounded. When I mentioned to Suki how impressed I was and that I hadn't even asked him to do this (since I was on a budget and wanted to keep the cost down. I had planned to use tape along the edges.) he said that since he knew it was going in my kids room, he wanted to make sure there was no chance they would get injured. Outstanding work. Chefs kiss!!!

SUKHDEEP from A & J Precision Sheetmetal was very helpful when I was in need of some sheet metal…read morefor some repairs I was working on. They carry aluminum, steel, galvanized steel or stainless steel, depending on your needs. As you'd expect they also come in many different thicknesses. SUKHDEEP helped me find the right thickness for the work has doing since I was planning to do the bending myself. Would definitely recommend them for all your sheetmetal needs.

Highly recommend Jay, very knowledgeable and provided excellent customer service. Came in to get my…read moreflywheel resurfaced for $120, and it was ready the next day.

I needed some brake rotors matched for a custom job. Spoke to jay told him what i needed. The…read morefinished product is an exact match i recommend him for your machine work. Good price and quick turnaround