Wow! Awesome!! I…read moreHad a stuck, broken bolt on my engine block (351w, 94 F-150). I tried to extract the bolt, but broke the screw extractor off in the engine block. Then I tried to weld a nut to the broken screw extractor to back it out. However, I couldn't get my weld to stick, so I called in the professionals. M&M came out in less than an hour. In 15min, Miguel had the screw extractor & bolt out! Then he took the time to tap the hole and correct the threads (correcting my previous attempt to extract the broken bolt). This is an awesome team. Highly Recommended!!! Saved me an enormous amount of time and money. I will be using them for future projects including railings and fences.

We have a metal ice cream table and two chairs that are antiques and have sentimental value, they…read moresat outside the general store my wife's great-grandfather owned in Connecticut. The wood seats of the chairs had fall apart and we asked M&M to reinforce and replace them with metal seats, and then paid the table and chairs. I was a little nervous giving M&M this project since we hadn't worked with them before and the table and chairs had value to us. M&M did a great job! The new metal seats fit perfectly and the quality of the paint job was excellent. And, they did the work in about four days. They did a great jobs for us!!

Disappointing experience overall…read more Verbal bid was given of 10k to 11k for the job over a FaceTime phone call as the project was explained. I politely asked if he could please try to keep it near the 10k. Written bid came in over 11k. (11,700$) Discussed that the bracing for the large metal stairs should probably be secured by something more than anchoring into stucco. To add proper supports the bid goes up again to over 12k. (12,800$) I would have liked a more professional experience where pricing didn't keep changing and for Christian to take the lead on making the stairs braced correctly and safely from jump. He kept saying this is simple we don't need to discuss the job so much. Also I had originally texted him to FaceTime me when he was onsite. He was on time but didn't respond to my texts. Had to wait 20 minutes for a response. He already left the job. Had to drive back to the job to be able to Facetime me. It is a large job that involves a lot of safety concerns. Was really looking for more professionalism to have the job bid correctly from the beginning and the scope of the job to be discussed throughly on time to get it created safely.

Christian (Kriz) was amazing to work with. Friendly, listened to the goal and great resulting…read moreproduct. Would definitely use again

Flawlessly fabricated a set of custom anodized aluminum sailboat hatch frames. Specifically, Taylor…read morewas a deeply knowledgeable professional craftsman who collaborated with precise communication skills in the manner of a trusted advisor. I've always believed that a company can/should be judged by the quality of its employees. As such, CCMF is fortunate to have such great skilled workers contributing to its longstanding success. I recommend them without hesitation.

I needed a quick one weld job in a pinch. Called and they said come on down - they completed the…read morejob while I waited. Great service and fair price. I will be back with a bigger job for sure!

Pamela helped me a few months ago with a broken off bolt that was stuck in a blind hole in my…read moreengine block. She spent 5 hours getting it out (I had messed it up very badly before she came) and ended up finally succeeding. I had resigned myself to the need to pull the entire engine, but she managed to do it with low clearance and saved me a bunch of time. Pamela was very nice and really knows her stuff! Thanks so much!

I Needed help with bolt removal on my 2006 6.0 power stroke, She way over charged me. She also…read morebroke other items in the process

Max and his team did such an amazing job on our railing. We could not be happier with the results…read more He was very thorough with his measurements and making sure everything was perfect before the product was finished. I really appreciate all of his kindness and hard work. I would highly recommend this company.

After shopping around for a while without success, I got ahold of Max at Ramirez Ornamental Iron…read more I'm glad I waited, because Max and his crew did a great job with my project. I am totally satisfied with it. The materials are high quality and the workmanship is first class. He built the fence and gate in his shop. Max is a good guy and easy to work with. He kept me informed as the project progressed. I recommend the company without any caveats.

I first used Martin's Metal Fab company around 2021 with a simple aluminum-to-aluminum welding job…read morethat I was really happy with. Expensive, but they did a good job. Next time around, in September 2025, they basically failed to get the job done. I came in with a ham radio antenna which required two copper-to-copper welds and two copper-to-aluminum welds. The relatively easy copper-to-copper welds were done OK, but two attempts to do the copper-to-aluminum welds failed when the copper wires pulled out of the welds. When I went to pick up the antenna after the third try, the welds appeared to be OK, and I paid the requested $460. Took the antenna home, where the copper wires again pulled out of the welds. I called in to protest, saying the antenna was still unusable. $460 for a failed job. The young man I talked to who coordinated the job would only say, "That's the way the cookie crumbles." So I wrote letters to two of the company's owners (in the Martin family) complaining about paying for a failed job. I never heard anything back. I expected at least a partial refund. Sure the job was unique and challenging, but they accepted the job with my understanding that they could accomplish it. Now, they have lost a customer and I'm out $460. Customer satisfaction: zero.

This place is awesome. I don't do a lot of metal work but when I do I come here. The staff is…read morealways friendly and super helpful. This place restores my faith in businesses and people. It's so hard to find people these days who care and take pride in their trade. this place is awesome!

All Spec did a fantastic job fabricating a replacement chase Cap for my house. Very quick…read moreturnaround on the quote, very competitive price, quick fabrication to my specs. It fit perfectly and looks great. Thanks for the quality work!

My experience with All Spec Sheet Metal was perfect. I needed a local sheet metal fabricator to…read moremake some steel skins for two tables I am building for a customer. I just picked up the two skins and could not be happier! They are perfect - exactly what I wanted. The best part? Dave called me and asked a few clarifying questions about what I was asking to be made. He even offered to "hem" or roll the edges so there were no sharp edges. He also asked if the dimensions I specified were inner or outer dimensions, which I did not specify initially. And, lastly, Laurie was fantastic! Her customer service skills were awesome and her total focus on my little, tiny job was impressive. If you need ANY sort of sheet metal fabrication done, I highly recommend All Spec Sheet Metal!!

This place is great, I came earlier this year to have some brackets made for my cargo van. They did…read morea great job very happy with it and the price was very fair too. I highly recommend you use them when you need something made. They are also very nice and explain everything to you, they don't try and take advantage of you. A+A+A+A+A+A+A+A+!!! I'll post pictures later

Great job took them my trailer few years back had a cracked frame and it's still holding up ,great…read morepeople ..

What an amazing place. There's so much to look at. We bought a small iron bird for our greenhouse…read more But we saw a lot more that we will get in the future. The owner/artist is extremely friendly. We asked about the theater the shop is in and he had some amazing stores of how he restored it and pictures to go with them. The garden area is beautiful. I recommend grabbing a coffee and strolling around there for awhile. We will be back in the future to purchase more items.

True craftsmanship at this place! The prices are expensive, but they would be because they are…read morehandmade and amazing. I have bought several small pieces there as gifts and everyone has loved them. They have some amazing stuff going on definitely worthy visit!

Came to Rio Vista to visit my mom and dad, and picked up a nail in one of my tires. Luckily, Rio…read moreVista Tire is just a few minutes away from my parents' house. They immediately took me in with no wait at all and repaired my tire, and for a more than reasonable price. They are competent and friendly, and firefighters to boot. Support your local firefighters association yall!

They told me $80 for 1 used tire which is ridiculous since anywhere else I go would charge $45 and…read morethat is for tire and putting it on