Great place. Fair pricing and excellent quality work with great turn around times. I'll be back!read more

Family owned business. Friendly staff. They did a small job for me with fair pricing. Also,…read moresurprisingly they are very involved in the bmx world.

been going there for materials long time now…read more it usally has what I need for my hobby thankks IPS

BUYER BEWARE - I purchased a Eron 6" swivel base for my milling machine P/N E-288 / No150 BASE…read moreONLY. It was advertised as "NIB" new in the box. When I opened the box, the swivel base was completely rusted. It is unusable as is. I contact IPS twice with photos asking them to make it right. They have never responded. So now I have a $90 chunk of rusted metal. WORTHLESS and terrible customer service!

David and his team work great together. I dropped off some gun parts for sandblasting then brought…read moreback the parts for clear coating after they were polished and it came out perfect! Fast turn around time and great pricing you can't beat! Thank you guys at ARC

I had an Air Cleaner that was showing all of 55 years of age. The before and after of the sandblast…read moreand powder coat made it look showroom. These guys are AMAZING! Nice people and excited about the job. Great price as well. Give these guys a chance for anything g you need media blasted and powder coated. Thank you Azusa Refinishing. Look at the before and after...

Since my last review of smaller projects/repairs (experience was good), I've brought them more…read morebusiness, thousands dollars' worth of business. Everything is good when they are TAKING your money and business. But, once it goes the opposite way (refund), Roger gets NASTY -- I didn't see this side of him before, always with a smile because while taking money in. I brought some parts to be replicated; 1" shaft with the center with a 2" diameter cylinder with 1" flanged bearings. I was suggested another way to "make" the part that would make everything more "simplified" for me, okay, sure. I wasn't sure what he meant, but after minutes of trying to explain to me, I just went with whatever Roger suggested since he would know better about the mechanics of machine parts, etc., He just told me that I would have to source the bearings myself, which is what I did. He asked me if the diameter could be smaller and I said yes. So I trusted his word and went with it. When I picked up the item, he said, "If it doesn't work out, just bring it back". The thing is, I complained after because what he sold me for almost $400, was NOT SOMETHING HE "MADE". It was a part that could be bought online (~16", 1" shaft with 2 shaft collars), which can be found on Amazon for $35 (shaft) + $10 (2 collars). He then said that he bought it McMasterCarr, then quickly changed his wording to "WE MADE IT". So which is it? (I will never know, but my assumption is he got it at McMasterCarr, as he first stated, or another retailer). Then he said, "I'M NOT HERE TO SAVE YOU MONEY." JUST WOW!! It's my fault for not understanding what he was trying to sell me, but it's obvious my lack of knowledge was taken advantage of--I let Roger do what he does. I believe there is a big difference between MAKING something and up charging for labor, etc., vs. buying $40 dollars worth of parts and CHARGING 9X-10X more!! Especially, to someone (me) whom he kept calling "friend" after all the visits/business I gave him. When he did this "work", I also dropped off a small part that had a broken screw stuck in it. He said it was FREE OF CHARGE to extract it. Anyway, when he agreed to refund me for the $400 (16" piece of 1" shaft), BUT he charged me $85 for the screw extraction that he told me that was free! From ~$400 refund, I received $85 less. This costs him nothing (almost literally) to fix easily. $85 FOR A SCREW EXTRACTION--HIGHWAY ROBBERY!!!! He gave it back to me, with a new screw, "I also gave you a screw". (Oh, gee, Thanks, I guess.)--But I didn't need that screw as I have 100's (if not 1000's) of these screws for my parts -- so he acted like giving me this screw in place of the broken one is a huge hook up, after I spent thousands and thousands of dollars here. I paid for this with my personal credit card, but he made out the refund check to the company I work for. So I asked him if he could cut the check out in my name since I'm the one who paid for it. He said, "just give it to your company and have them pay you." I explained to him that I can't do that because of accounting issues, etc. He got mad and he snatched the check out of my hand with an attitude. This right was the last straw. I was still going to give him more business (which I even told him, thanks for the refund and making this right, I'll be back). He told me, "I DONT CARE ABOUT MAKING THINGS RIGHT AND WHAT YOU THINK, I DONT NEED TO RESTORE FAITH IN YOU OR YOUR COMPANY". Okay, fine. ^Great attitude, perfect way to lose business after the fact that I stated that I hope this one issue won't affect future business and that I would be bringing more business. Roger shouldn't be interacting with customers on the front line if that's his attitude and represents your company. On the other hand, Alex is very polite. While Roger was deflecting the situation, blaming it on me, arguing who said what, this and that. Alex is the one who apologized on behalf of C&H Metal with a smile on his face, while Roger was steaming mad at the situation -- just the way he snatched the check out of my hand says it all. ALEX IS THE REAL MVP at C&H Metal, too bad he's not at top management, because management up top is clearly lacking customer service skills and lacking know-how to keep the customer acquisition costs low. I can bet they'll see this review and Google what CAC is because they don't know. Or maybe, they are making so much money, they don't care how they lose a few customers the way they do. Roger (mgmt) just knows how to take money with a smile on their face until you complain about something, then it gets nasty. This is the type of business you don't want to give business to. If you do give business to them, good luck. Hopefully, it's a short stint because eventually an issue will arise, and Roger has a short fuse, and you may not like the way he handles it. This experience was a blessing in disguise because I found a better and CHEAPER shop to do work for me.

From start to finish, their communication and service were top notch. I've been trying to find…read moresomeone to help with a fabrication for a kitchen hood vent, and finally, found the right company to do it! I would strongly recommend using C & H for your any of your fabrication needs. Great job!

I've known Jesse for better than 40 years. I've watched him become the craftsman he is today with…read moremetal polishing and plating. The work he does is outstanding while being reasonably priced. He and his son run a very tight ship. Their expertise is second to none.

I have used them several times and always been happy with everything I have had done. They have…read morepolished aluminum, chromed small and large parts. Also repaired some die-cast parts I needed.

the pipe is amazing for the mini bikes they port polish heads they do a lot id say it's a very nice…read moreshop

Got my Honda Cbr1000 block welded that was cracked .. saved me from having to replace a whole…read moreengine.. thanks

They are very precise with all measurements and are quick to give me my desired break shapes…read more Really recommend!!

Last year I was scrambling around town trying to match a "control sample finish" of a particular…read morestainless steel in a #6 finish. With the clock ticking and trying to meet a deadline that was approaching, I found myself racing with time. After being turned away from so many local fabricators, my last draw was Architectural Aluminum Cladding, Inc. I had left that morning to pursue other possible leads and AACI would be my last stop for the day. That morning making last minute appointments, my conversation with Jenny Peng who is the office manager/estimator/design consultant and many other titles left me with hope with whom I had no prior contact or business ties. Naturally my day concluded in S. El Monte when I walked in the front office and met with Jenny. I presented my plan details and made Jenny aware of our "high profile client" expectations. She replied with her soft voice "no problem, we can do this for you". That was a major relief as a construction project manager to hear, it was comforting. Jenny brought out her floor production manager and also got involved in making sure everything shown can be made. Basically it involved taking flat sheets of stainless and breaking with 90 degree corners, 45 degree miters and ultimately applying a hand custom finish to create a intricate #6 finish. To the average person, you really can't see the difference unless you're a designer, architect or metallurgist. Our business continued the next day sending over my design plans electronically and signing off to proceed with fabrication. Drafted a deposit payment to commence work immediately. Terms of purchase order, net 30 days. Our client even offered to pay for Saturday labor to ACCI to help expedite completion. Our first delivery by AACI arrived on Monday with 2nd delivery on Wednesday as promised. No delays or hiccups. Material arrived with extra protection including bubble wrap. They went the extra effort to deliver sensitive material and not damage anything in transit. It's not a good scenario when you find yourself short on time and material is arriving damaged. Everybody loves a happy ending when the front doors of our client store opened up for business at 10am, Friday. I currently find myself with the same client and didn't think twice about reaching out to Jenny Peng and staff to help complete another project in Beverly Hills. This is a specialty fabricator capable of taking on small and large production order. State of the art metal shop offering many services to cater to your client and design needs. Modern equipment and highly skilled labor is a win, win. Finish work is of top priority specializing in laser cutting, break shapes, welding, powder coating to name a few. Pura vida :) http://www.aacladding.com/index-2.html

Huge thanks to Haik for trimming my grill grates to fit my BBQ perfectly! He knew exactly what I…read morewanted, and the result was flawless just how it should've come from the factory. I highly recommend him to anyone needing metal or aluminum work. He's truly an expert in his craft, plus a super friendly and humble guy. Top-notch service!

Hike was very helpful and quick. All I needed was an angle cut on a couple of solid steel counter…read moresupports. It was done so fast.