Can't recommend them enough. Great service and exceptional work! They were on time and went the…read moreextra mile.

Recently a slip neighbor damaged a section of my vessels stainless steel railing. This railing one…read morecontinuous piece from midship port to starboard, with 1 inch stanchions and mid-rail. It is exceptionally finely crafted with every joint welded, ground and polished. After considerable research I was able to identify Joel Murry owner of NW Fabrication of Bellingham WA as the only one in the area capable of matching the repair quality to the rest of the rail system in the field. Joel turned out to be an outstanding craftsman and a real pleasure to work with. He provided a "not to exceed" estimate, and his final invoice was almost 15% below his estimate. The repair required removal and replacement of one stanchion, and one section of midrail with welds at base and top of stanchion and both ends of the midrail plus a weld to the adjoining undamaged section of midrail. The job was completed in a timely manner and the quality of the repair absolutely indistinguishable from the original railing. Like it never even happened. Joel does field work and has just moved to a new very well equipped shop. I most highly recommend Joel and his NW Fabrication for any fabrication needs you might have.

Can't recommend these people enough. They came out super short notice and welded my heat exchanger,…read morewhich salvaged our week of sailing. Very professional and went way out of the way to accommodate our schedule. Thank you! Weld is holding well!

I strongly do not recommend this person. I have never experienced service like this before. It…read morelooked like he had no real experience or skills in appliance repair. It also looks like all of his Yelp reviews are fake. Zero stars.

Good communication, showed up and replaced my dishwasher mother board as predicted and promised.read more

I called Swanson's on Friday and asked if there was any way he could come out on Monday. We had a…read morestain in our carpet and overnight guests coming Tuesday night! He explained they were pretty booked up but he would try to rearrange his schedule and "earn my business." Within minutes, he called me back and we set a time! I certainly understood if he was unable to meet my emergency need, but was so happy that he made the effort! He came as scheduled and we couldn't have been more pleased! He explained that the stain was pretty deep and he might need to come back and treat it a second time, so if it re-emerged, please call him. I'D RECOMMEND HIM ANY AND EVERY TIME!

I had a toilet overflow into my carpeted front room. I called Swansen's at 7:30 pm and asked for…read morePatrick to take care of my problem. He arrived the next day and my carpet again looks new. This is a great company and Patrick is a hard worker.

ProFix Appliance has fixed my washing machine, my dryer, my oven door and my microwave in the past…read moreyear. I cannot recommend this father and son team highly enough. Their communication and responsiveness is excellent and their pricing is accurate and fair. They have superb customer service. They come with tools and fix what they can on the first visit. If they need parts - they go get them and return the same day. I appreciate Profix Appliance and will continue to use this company for all of my appliance servicing needs.

I highly recommend ProFix Appliance Service. I had a washer problem, as the water was not draining…read moreand the machine was not balanced. This service came out immediately and after an hour identified the problem They ordered the necessary parts and told me they woud come back for the install in 3 days. True to their word ( which is highly unusual these days) they were installing the new parts on the 3rd day. The washer now works great and doesn't make noise when spinning out.. They are very polite and most important competent!! Good Guys to know.

Steve did some work on a 1970 Opel GT for me and he did an outstanding job. He works fast and at a…read moregreat rate. He sources hard to find parts and can complete custom work as necessary. Highly recommend for any type of custom or restoration work.

I have raved about these folks before and at the risk of becoming known as a "groupie", I need to…read moregive them more kudos. I called them regarding our very old but wonderful refrigerator, knowing it might be time for "last rites". Mike was able to fix the immediate problem temporarily. Our model has been discontinued for some time however, he was able to find replacement parts and will remain vigilant for parts we may need down the road. Our other appliances they have worked on in times past are still going strong and you can't beat that for value. On top of all of that they are terrific people. Use them - you won't regret it.

In terms of response time, knowledge, and practical advice, I do believe Appliance Service…read moreSolutions is a knowledgeable and reputable company. The technician was professional, clearly experienced, and identified a legitimate issue with my refrigerator that I was not previously aware of. That said, I will not be moving forward with additional services because of my experience with pricing transparency. I originally scheduled service for a dishwasher diagnostic. Over the phone, I was quoted approximately $150-$165 for the dishwasher diagnostic, not including any additional parts or labor if repairs were needed. While the dishwasher diagnostic cycle was running, the technician began discussing Samsung appliances with me and mentioned that my refrigerator model may have a common issue. He asked if I minded him taking a quick look at it while he was waiting on the dishwasher cycle. My understanding from the conversation was that this was a quick courtesy look while time was already passing during the dishwasher diagnostic. I agreed. He briefly inspected the refrigerator, pointed out ice buildup, checked the temperature, and explained the likely issue and what the repair would cost. I appreciated the information, and I do believe he correctly identified a problem that may need attention. The issue came at the end of the visit when my final bill was just over $250. When I asked about the difference from the original dishwasher diagnostic quote, I was told the additional amount was because he looked at the refrigerator. My concern is not that the refrigerator inspection had value. It did. My concern is that I was not clearly told beforehand that looking at the refrigerator would be an additional diagnostic charge. Had I been told, "I can take a look at the refrigerator too, but it will be an additional charge," I likely would have approved it. The problem is that the way it was presented -- as something being done quickly while waiting on the dishwasher cycle -- made it feel like a courtesy or part of the same visit. Overall, I think this company knows appliances and appears capable. However, based on my experience, I would recommend confirming all charges in writing before agreeing to have them look at anything beyond the original appliance you scheduled service for. Clearer upfront communication about additional diagnostic fees would have made this a much better experience. For anyone wondering why I chose two stars: Yelp labels two stars as "could've been better," and that accurately reflects my opinion of this experience. The technician seemed knowledgeable, and I do think the company is capable, but the pricing communication could have been much clearer. That is ultimately why I feel two stars is warranted.

Isaac is awesome!! I had powder coated pieces I needed by a deadline and he made it happen, twice!…read moreI asked for a matte finish on a paint sample that was shiny and it was exactly what I was looking for. Thank you Isaac! You always made It happen!!

We took some parts into the shop and unfortunately had an issue with stripping and the part was…read moredestroyed. Lesson learned. However, these guys were great, were very apologetic and compensated us for the lost part. We've had a number of other projects with them go quite well, and I'd recommend them anytime! Just make sure you mention what the material you are bringing them is. Our part was Magnesium, which isn't always the easiest to work with.