I don't 1-star review (or 5-star, for that matter), but I sure do consider it from time to time…read more Had good communication with the gen mgr on getting Tritium night sights installed on my son's pistol professionally. Wish he would have explained to me how long it would take to do a job that should be an hour, or less, at most. Gunsmithing isn't prevalent in our metro, and Sharp Shooters was the first call we made. They didn't have a problem with us getting a 3rd party purchase to install on the pistol. Great price for installation, by the way ($25), so we brought it in. Called after a week and were told, 'It's number 3 in line for service. Our tech says he'll to get to it after lunch.' Didn't happen. The following week, we called and basically heard the same spiel, and were told we'd get a call the next day when it was done. No call. It got tough telling my son everyday to hang in there. That disappoints me most in all of this. Regardless, what could we do? If they were going to do it we had to wait. Don't complain to people who are working on your gun, right? Look, I probably could have installed the sights (I have the tools and have done it on my rifles), but this was NOT my firearm, so I took the local/pro route for my son. If it was explained up front that it would take weeks to do, we would have called another service. At the 3-week mark, we called again and found out it was done. The rep stated (curiously) that there wasn't a 'note to call the customer,' and could not say how long it had been since the replacement. Not cool. If we did not call it would have just been sitting there. Picked it up, with another heapin' helpin' of crap-sandwich for this experience. The $25 job was now $54, because the smith had to, 'Cut out the rear sights.' When I asked the rep why we were only getting the original rear sights back (in package and obviously not cut out), I also asked where the original front sights were? He went to a back office for a minute or two, and came back with a blah-blah-blah you can wait here for the next 2 hours until our guy comes in. Yeah, nope. This was a brand new pistol purchased in 2020, and not some rusted vintage piece. Permanently marred the front site area, too (see pics). Front sights on any modern firearm are removed east-to-west, and reseated west-to-east. Friggin' Gunsmithing 101. Effing-ridiculous. My sons (3) and I considered a year's membership at their indoor range ($300 each/plus tax), but in light of everything, that's a hale and hearty hell no. And, if the sights clearly need adjustment when we take it out to the range, I will update this review accordingly...

I come into this review open and honestly. I had an incredible experience here…read more Someone missed the mark on teaching me anything about guns and shooting and it was my very last week in my 20s and my husband bought me the Women and Guns class. I am really really glad he did. It is something else to learn a new skill completely, but leaving with real concrete knowledge is even better. Mind you, I had never shot a gun before this experience and the class itself is amazing for anyone who is feeling like they just want to feel comfortable about guns as a whole. Darius was our instructor. I brought a friend with me and the class was full. I brought my own gear, headphones and glasses because of course, my husband. The class is broken down into parts about the history of guns, what a gun is made of, what ammunition is and so so much more. I left with the experience and the education all packed into a three hour class that was rich in content. Daruis was amazing. Honestly, this whole thing can be intimidating and I was coming in wanting to know as much as possible, since I came in knowing absolutely nothing. He put the class at ease the whole time, and answered every single question. He used facts then backed those facts up with his own opinions. Being a marine, it showed that his dedication to teaching people about this was exactly what he should be doing. I shot as many guns as I could. The adrenaline was followed by massive hunger, (so funny Darius warned us about this.) It was a well rounded experience that I would recommend to all women.

Clint is very easy to work with and will bend over backwards to make your experience as simple and…read morestraight-forward as possible. If you are looking for something specific, Clinton can utilize his extensive variety of contacts to try to help you out. If, for some reason, he's unable to find what you're looking for, he will remember your request and let you know when he has it back in stock. Most other shops are only interested in the point-of-sale, but Clint wants you to be a repeat customer (and it shows). He typically beats any online prices for the same item. Highly recommend Precision Combat Arms!

Impressive store. Owner is a good guy, as is his associate. They have arms that the retail stores…read moredon't/won't carry. I was looking for a very, very specific modern rifle carbine for recreational target shooting, and I wanted it in a large caliber for home defense--that I hope it will NEVER be used for. They had it in stock, and even if they didn't, could have ordered me one and had it shipped to them. They are totally compliant with all the latest, ridiculous, Washington state restrictions. Only open on weekdays (but not Wed), and despite the construction to the west on Trent, are easy to get to from anywhere in the metro. If you are familiar with Airsoft products, they carry an impressive line of those as well. Sportsmen, hobbyists, LE and security will find the cutting edge gear here...

This shop sold me "factory blemished" AR lower receivers that they claimed was factory new…read more. I asked explicitly over the phone if items are "blemished" and they said it was not blemished.. Upon receiving the items, I realized they were indeed factory blemished and confirmed them to be blemished with the actual factory directly. After contacting the store they said they will give me a refund, but I am still out of pocket a $150 for FFL transfer fees for receiving, shipping for receiving and FLL fees for returns and shipping for returns.. They were untruthful with the transaction and the last e-email communications went un-answered when prompting them to make it right.

Frank is the most knowledgeable guy I know about AR15's, he taught me to put my first one together…read moreyears ago and I am still going back. He always has the best parts and by far the best prices in town. This shop blows away any other shop in town for prices and you can bring any project in for help and he won't just look down his nose at you like other shops. If you are looking for an AR, AK, or hyper accurate long gun, this is the place to be.

They are wonderful, I got my last Ruger here, I will definitely be back. Service is great and…read moreknowledgeable, product priced amongst the best in town.

The signal to noise ratio here is the highest I've seen, and I have been in lots of gunshops over…read morefifty some years. I came in just to look around, but the staff was so friendly (without being annoying) and knowledgeable, that I ended up buying my first suppressor. Michelle walked me through the whole process and made it easy. Great place to shop!

Did a repair for us that other shops had turned down. These guys are so friendly and knowledgeable!…read more Yes, definitely do business with these folks!

A great place to shop for and purchase firearms, ammo and accessories at reasonable prices!read more

I have had several arms at this location for many months. Revolver to get a rubberized grip (parts…read moreavailability issues) , shotgun for a barrel cut-down. It's not a matter of first in,first out; you can only do what the market demands. Apparently Hunting arms services will supersede fit & finish jobs. Are supply chain issues REALLY affecting repairs & retro- fitments? Apparently so, patience is a virtue. Keep on keeping on!

I took in three 3rd gen Smith & Wesson pistols to have sights put on and an extractor replaced. I…read moreasked ahead of time if they had experience working on these guns, and they said yes. $175 later I'm very disappointed. They damaged and jammed the extractor pin by trying to hammer it through the wrong way, and never succeeded in replacing it. They also hammered the sights through the wrong direction, leaving gouges in the slides. One of the front sights is misaligned and forced into the dovetail. Now I'm out $175 and have to go shop around to see if my guns can be repaired.

These guys are extremely helpful, very knowledgeable and if they don't have what you're looking for…read morethey will order it for you. They welcome Washington buyers as well. Very nice guys!

Knowledgeable and friendly. All of my questions were answered. The location is easily accessible.read more

These guys are the best. The owner goes out of his way to make sure his customers are taken care…read moreof, and I really appreciate that. If you've ever walked into a g@n store and dreaded talking to the fudds at the counter, this place will be a huge relief. They know their stuff, they aren't pushy, and the store itself has WAY more items than you might think. They have a lot of things I usually would order online because you wouldn't expect to find them locally. Suppressor mounts and hubs, flashlight tape switches, good, high end NVGs, steel targets, and they personally test a huge majority of the gear they sell - and then put up well made YouTube videos with the results. If you've ever bought an NFA item from a shop and then had them sit on your approval for days or weeks... another sigh of relief with ECG. From what I can tell, they strive to get notifications out to customers the day they get the approvals from the ATF. No games like I've played with a lot of other NFA shops over the last 14 years. Overall, if you've never been in - you should support these guys.

Had what I needed, knowledgeable and friendly for someone like me who's just starting a collection.read more

I recently brought a vintage Winchester .22 rifle to Indognito for some repair work. Jerry has a…read morenice setup there with all the tools necessary to do the work - along with the skill to do it. He is very knowledgeable about firearms. I left my rifle there for about 10 days, and he went through it, repairing the rear peep sight, and the magazine feeding tube (which was bent, and non functional). Now the rifle works and looks great - keeping the old patina intact! Jerry got the work done on time - and at a reasonable price for the time he spent on it. I will go there again for any gunsmith work.

Seriously such a great business. Very helpful. I called and was able to be fit in same day and was…read moreassisted with very professional service and I will definitely be coming back