I brought my craftsman t-110 in to get repaired. Billy the son of the owner was very helpful. He…read morewas honest and that goes far with myself. my rider was really not worth fixing. could have been but I decided to just buy a new rider. Billy sold me a very nice Husky for a great price. They also didn't charge me full price for the work Billy already put into it. They whole group ( family I believe ) were very friendly. We had a few laughs and I would highly recommend them over others in the area. See for yourself! The friendliness and honesty itself is worth it. But their price was actually cheaper too. I got a much better mower with a bigger motor and a v-twin for only a couple hundred dollars over a new craftsman that didn't have a hydrostatic set up And was $2300. It was a no brainer to buy the Husky from Weisheit!! And you cannot get better service, Really. Even delivered same day after Billy took out of the crate and assembled what was needed. Try them people. You will NOT regret Rich

After doing extensive research on zero-turn mowers, I discovered Weisheit Engine Works only 22…read moreminutes from home. Upon arrival at their 8am opening time, I was greeted by Billy, who was very knowledgable and explained all their great models (Ariens, Gravely, etc). By noon, I made my decision on a Gravely, got a quote and it was prepped and delivered by 5:30 PM!! Additionally, they took away my older Cub Cadet mower for evaluation and possible purchase. Great service. Billy and Chris are professional, competent and responded quickly to all my questions. I'm very pleased, and look forward to a long relationship.

Let me first say that the piece they did for me turned out, absolutely perfect in every way…read more I had a smaller project and was worried I would be small fries to anyone willing to take on my project. I have a small studio salon and wanted a very specific table in size and shape that was sheathed in metal. Not only did they take on my project, but they took a generous amount of time to discuss with me my options. They didn't steer me to the most expensive options. I was talked through the pros and cons of the different materials and options. And the results were PERFECT. The customer service is unmatched. You couldn't find a better team to work with. I am supremely pleased with my piece and would recommend them to any friend or client of my own without reserve. I look forward to working with them in the future!

They do a great job there. Excellent quality and a…read morenoticeable difference compared to others.

I'm told I have to just keep waiting longer , even though it's now been six days, and the tar is…read morestill wet in spots and/ or cracking. Also, there has been no rain since the driveway was sealed..

Over the years, I've had a number of folks work on my outdoor equipment. I was fortunate to…read morediscover Matt's Small Engine Repair relatively close by. Not sure if the guy sleeps as he has a "day job" but makes time to ensure that neighbors with outdoor equipment issues are well taken care of. I have an older John Deere lawn tractor that has served me well but needed some TLC to get it running properly. Matt provided that skillfully and quickly. Great guy and very knowledgeable. Repairs are diagnosed quickly and repairs are first rate. He even offers PU and drop off at a very reasonable cost. Recommend him unconditionally and appreciate his responsiveness to calls and texts.

Matt's Repaired, cleaned, and performed maintenance on my lawn mower that was sorely in need of it…read more Fast turn around, very reasonably priced and great work! I highly recommend this company!

Exactly as advertised. Brought my BMW wheels in for an overhaul and they came back good as new…read more Very satisfied with service and price. Thanks!

Wouldn't go anywhere else for wheel repair. It's clear that they take pride in their work and do as…read moreperfect a job as possible. You get what you pay for.

These guys are top of the line. Very knowledgeable and always friendly and ready to help. I could…read morenot recommend them enough.

Had these guys shorten and re-balance a drive shaft for me. They did a good job on the drive shaft…read more 4 Stars only cause it was a tad on the expensive side. Super nice, cool shop, obviously very knowledgeable in V-8's and drive train applications. The rebuilt/build hi performance engines, have a 2WD dyno, etc. They also machine and do diesel engine stuff as well.

Awesome selection, great guidance, flexibility, communication, speed and results. Dru, Geovanny +…read morethe crew were the best to work with on our now second project together. I still can't believe how quickly they get projects done + with such skill. Both of my projects had particulars, mitered waterfall edge, huge backsplashes and tricky angles with transitions and literally the execution was flawless. I've raved about both projects and love to hear from others they've had the same positive experience. Great work and great people.

Having to remodel a kitchen and counter top is an adult fantasy and dream you want to come true…read moreafter working so hard to save the money for. When Dru had said yes to the job and how fast they can have it done should've been a Huge Red Flag Why aren't they busy like everyone else.She came back with a price for us and can get it done in less then a week. I was told they would buy two slabs for the job and not to worry about anything it's her job to worry.We came right over to see the slab and see how the lay out would be.We left it up to Giovanni to organize the layout and he even said it would be tight as they only purchased one slab.Never seen them use a leveler to double check their shims and they cut out faucets holes after they installed cutting the holes dry as it began to smoke they poured a cold bottle water over holes to cut hot and cold doesn't seem to make sense to me and would think it could crack. Right then I should've said no to the job but kept being reassured that they know what their doing and let them finish. I've asked about the scratches on surface and marks around the edges and was told it was from the Machine that cuts granite and all would be polished out. Just let him do his job I'm told. I noticed one slab was not cut even and left a gap from the wall.He began to add colored putty to edge that is seen walking into the kitchen and was told well just add tile and you wouldn't see it. Well maybe make your cuts straight instead.So now after all the money I'm spending I have to add a tile job too that wasn't our plan. They even had the balls to bring in a super short piece for a smaller top of an end cabinet that goes next to stove and when I showed the guys they shrugged their shoulders and said they don't speak/understand English. Why even bring this piece into my home if it's nowhere close to fitting? Giovanni says he can glue a piece together to make it fit as they don't have any more of the slab left over. Again I should've said take all the pieces out of my home as I'm already not happy with the job.But was told not to worry they would fix and make all right. I spoke with Dru about all my concerns and she said it's not about the money and she will make sure the job is done correct and I'm happy with the final results.So I'm out looking for tile now and see not only do I need tile I need thick tile as the gap is so thick the tile would slip right through. When I say this to them I'm told by the time I add the tile mud I won't see gap. And would give me a discount towards having to get tile as money isn't in issue it's about my happiness in the job. No money discount amount was said at the time but I did say it's costing over $900 just for the tile and not adding material and contractor.Weeks for by as they ended up having Covid.Giovanni comes back out to take measurements for the small new piece replacement.( as they never made a template the first time around )I bring up my concerns of the cutting marks and unpolished look of edges and scratches.He uses a Black Magic Marker for some of the small scratches and says the next time he will work on the edges. He worked on a small hole that was next to a seam ( that looked like it got broken off ) and said once the tile is up you won't see the gap between the granite and wall. But why was it cut short - crooked on this one piece the other pieces are straight and somewhat tight? Again shoulder shrugged and said they will make right. And in all this time I had the counter tops covered over the sink and everywhere else as I feel like the work is still in process and don't want to be blamed that I did something wrong to the counter tops. So a new slab was purchased and I was told it cost them $3000 for it Well maybe you should have purchased two the first time around and the guys would've felt more comfortable cutting slabs and wouldn't have made mistakes. So Giovanni and Dru come out after work to add the small section of countertop unprepared doesn't even bring sealant to glue top down. They do however brings other stuff to work on edges and scratches I point out scratches on new piece and he begins to color it in with marker ‍‍‍ Well just stop and don't do that to the large scratches. They seems to be in a rush to leave and collect rest of money. So they leave the "black stuff " for me to deal with the edges myself. I asked well remember you said a discount for me having to purchase tile Dru agrees and says how about half so I only received a $500 discount! I really think it should've been more as I didn't make all the mistakes and sometimes a business has to take a loss. This job has been in the works for over month now and I now noticed three cracks around the sink one where the faucet goes ( cold water was poured ) and the around the sink edge / corners I send a message and it take four hours to get a response of "it's a natural stone and cracks are common" I had to write a short review

They paved my driveway a couple of years ago and did a very nice job, so when it came time to have…read moreit seal coated, I figured they would do a good job at that also. My mistake. They sprayed the seal coating on and it looked like they just used black paint. A bad job. When I complained, they said that they would come back and do the job over again for free. That was suppose to happen this past Spring when the asphalt plant opened again. I have not seen or heard from them since. I guess their word is just as good as their workmanship. David Thierling Canaan, NY

I was recommended to use Hunziger for replacing my old driveway…read more I submitted for a free estimate in August with no reply. After many phone messages, finally they told me everyone was on vacation! What a dumb thing to do for a paving team on vacation in the busiest time. I took time to go to their address of 25 Corellies Ave. They were not there. The other businesses told me to go to the office on Columbia Tpk. I went there. For God's sake, why don't they change their address? Their address is still 25 Corellies Ave. I sent detailed texts to the owner, Jason Hanziger, with photos of my driveway for a free estimate. He completely ignored me. Don't use those highly advertised contractors.