Service was on time and professional. Exactly what I wanted and for a great price!…read more I needed a metal fence piece welded back that had been pried open by a would-be intruder. And most importantly a more reliable lock for my rear gate that couldn't be so easily encouraged open.

I hire Pedro Marquez and first of all he completed the job about a month later then he promised and…read morewhen he finally finished i noticed that he used a cheaper and thinner metal then that he promised, and the worst part is the painting job, is paint everywhere including the new concrete steps.

Miracle Fix: Jose and Lorenzo Saved My Miata. Answer to my…read moreprayers. Expert welders and fabricators. My Mazda developed a loud rattling and knocking noise underneath and no one could figure out why. I went to eight different shops. Each one gave me a different guess: heat shields, engine mounts, catalytic converter, "play in the differential," you name it. Nothing made sense, and the noise was so annoying at red lights and/or with foot on the brake . Finally, one honest shop (Thanh Auto in Garden Grove) spotted the real culprit: a big clean crack in the aluminum mounting bracket attached to the differential housing. Every mechanic I spoke with afterward told me the same thing: "Only solution is to drop the entire differential and replace it." Translation: very expensive. Thanh's expert ( Keith) suggested welding the crack, but every welding shop I contacted said the same thing -- "No space. We'd have to remove the differential before welding. Almost as costly as replacing the whole diff." Then I found Jose at OC Fabrication on Yelp. Within minutes of sending him a photo, he replied ...fast, professional, and confident. He said it might be doable without removing the diff, but he needed to inspect in person. He even gave me two honest estimates: a higher price if the diff needed to come out, and a much lower one if he could reach it in place. He squeezed me in after hours the very next day. He and his welder Lorenzo crawled under the car, inspected the crack, and confirmed they could do it without removing anything. They carefully jacked the differential to realign the broken ear, cleaned the aluminum, welded it beautifully, and then reinforced it with additional metal. All in under 90 minutes. When we test drove the car afterward -- night and day. Smooth. Quiet. Solid. The rattling and knocking that haunted me for a weeek? Gone. Jose told me straight: most shops wouldn't even attempt this kind of repair. But he and Lorenzo took it on with skill, confidence, pride in their craft, and real customer care. They solved a problem that eight other shops shrugged at. I can't recommend these guys enough. Professional, talented, honest, and genuinely passionate about their work. Bravo, Jose and Lorenzo. Many thanks. Bonus: Their shop is amazing -- full of unique custom fabrication projects, metalwork, and creative builds. Kudos for their skill and craftsmanship and care.

Super friendly, fast response time, professional, and did great work. Highly recommend!read more

Amazing. No other business wanted to help me straighten a brass shaft. Contact Ernesto, brought it…read morein and he did it right there and then for a reasonable price too. Thank you.

Ernesto is the BEST! My son's Super 73 e-bike frame had a major crack. Super 73s option was a new…read morebike or frame and that's not in the budget. We called Ernesto and sent pictures of the damaged frame and he said he could definitely help us repair the frame. In fact, we called on a Thursday night after hours and he answered all our questions (I was just going to leave a VM for next day). Ernesto was communicative re: our project throughout the process. We dropped the bike off and repair was done same day. My son's frame is fixed and stronger than ever. He's ready to ride again thanks to Superior Welding and Ernesto!

Great job helping with my compactor needing metal enclosure. Looks awesome and reasonable priceread more

Mark and Luke are simply experts who charge a fair price for their seasoned craftsmanship and wise…read moreperspective on the items they fabricate. The quality of their work is unmatched and due to the positive vibe at their shop, many customers become friends and many friends become customers!

Aaron was very responsive to my project request, provided me with a quotation which was very fair,…read moredid the work onsite, cleaned up the work area with a broom, and I was absolutely pleased with the work. Highly recommend - he says they do metal work (fences, steel pipe) - anything that involves welding

Outstanding Craftsmanship & Professionalism!!!!! AM Welding…read morewent above and beyond on our project. Their attention to detail, quality of workmanship, and commitment to safety truly stand out. From the initial consultation to the finished product, everything was handled with professionalism and clear communication. What really impressed me was their ability to take complex welding requirements and deliver precise, durable, and clean results. You can tell they take pride in their work. On top of that, they're certified and highly knowledgeable, which gave me confidence that the job was done right the first time. If you're looking for a reliable, skilled, and trustworthy welding company, AM Welding is the one to call. I'll definitely be using them again and recommending them to anyone in need of welding services!

Jon came out gave estimate. He was prodessional knowledgable. He just wasn't available when we…read moreneeded our project done.

Jon and his team are amazing. I had multiple quotes and not only did he have the best rate but…read morethere's a sense of integrity and intrinsic value in his work. He was on point with his timelines and his staff is friendly and focussed. You can tell they all love what they do. Even though i asked for a basic gate he still managed to add a simple design and I absolutely love it!! Don't waste your time, call him first :)

I took my davit to Nacho to get repaired. At drop off, he said it would be done the following week…read more After waiting to hear from him, I text him on a Monday asking for an ETA and he doesn't respond. Thursday I call him twice and he sends me to voicemail. Friday I finally get a hold of him and he says that he can't repair the davit. I go in on Monday to pick up my davit, and he won't even look up from his phone to talk to me and just points aimlessly at his workshop and tells me to grab it. I ask him if he really can't repair it, and he says it's just too small of a job and tells me to buy a new one. Extremely rude and unprofessional.

These guys are great. I have taken them a variety of projects that were custom. Nacho had really…read moregood input that added value to the projects - ways to do things that made the assembly stronger or more functional. They delivered on time or early for each project, and the cost has been reasonable. Stainless fab is not cheap but it is difficult to do well. If you have a stainless steel fabrication project N&J Fabrication is a great choice.

This place is a staple in the neighborhood. I've used them for various custom metal work needs over…read morethe years and they always come through. I recently ordered an iron address sign but the vendor forgot to drill screw holes on it. I called West Coast Metalcrafts and the lady was very accommodating about taking care of it. I came in with no appointment on a random weekday and she had the techs put the holes in it in less than 15mins. I paid $10 and was very happily on my way! Great service! Will be back again.

I can not comment on the quality of work as our business relationship did not get to that stage…read more However, I can comment on the customer service, and, as others have pointed out, is terrible, but I think I might understand why. We needed a gate in our backyard. I had an appointment to have the gentleman come to our home to do a measurement. The appointment was scheduled at 12pm to 1pm to do the measurement. That day I realized I had an another appointment that would end at noon and was less than 10 minutes away. I called at 10:30am, spoke with a woman, and asked if it was ok to be about 10 minutes late. In addition, I informed her that I had contractors in my backyard working an another project. The gate was opened and if he arrived at 12pm he could start measuring and I would be a few minutes behind. She agreed and said that would be fine. I arrived at 12:10pm and rushed to the backyard only to discover that he had arrived and left AN HOUR prior (as told by my contractor). Confused, I called to ask if he could come back as I had some instructions and questions to discuss with him. I, again, spoke with the original woman who was already defensive claiming he waited for me for 45 minutes then left. I looked at the time, it was 12:25pm. I informed her if he had showed up at 12pm and waited 45min, he would still be here. It was at this point, she admitted he had showed up early to take the measurements. I then asked her why did he show up early. This question seemed to anger her and she said, "This project is off to a bad start so we are not going to bid on it." Riddle me this fellow reviewers, why would this gentleman show up early when he knows: 1. I am not home. 2. I am going to be late. 3. He has access to do the measurements without me there. I would argue the reason he did this is because he doesn't like people, doesn't like dealing with people, doesn't like talking to people. He is probably very good at his craft but would rather do it without having to deal with the customers. And that is why you are seeing lots of reviews about terrible customer service. Thankfully there are plenty of other iron workers with competitive pricing with good customer service. I ended up going to Go Iron Works in Long Beach and recommend them highly.

I contacted several welding services to look at my rusted yard gates, and most of them told me I…read morehad no choice but to replace them entirely. Ismael was the only one who gave me a straight answer, telling me they could be repaired, and provided a very reasonable quote. The team did an incredible job and really focused on the details, from the welding itself to cleaning up the gates afterward. I truly appreciate the quality of their work and their honesty. I highly recommend Mick Welding Inc for anyone looking for skilled and professional service!

Very friendly and flexible. Was able to help me without much prior notice and at a very fair price!read more