Amazing. No other business wanted to help me straighten a brass shaft. Contact Ernesto, brought it…read morein and he did it right there and then for a reasonable price too. Thank you.

Ernesto is the BEST! My son's Super 73 e-bike frame had a major crack. Super 73s option was a new…read morebike or frame and that's not in the budget. We called Ernesto and sent pictures of the damaged frame and he said he could definitely help us repair the frame. In fact, we called on a Thursday night after hours and he answered all our questions (I was just going to leave a VM for next day). Ernesto was communicative re: our project throughout the process. We dropped the bike off and repair was done same day. My son's frame is fixed and stronger than ever. He's ready to ride again thanks to Superior Welding and Ernesto!

Miracle Fix: Jose and Lorenzo Saved My Miata. Answer to my…read moreprayers. Expert welders and fabricators. My Mazda developed a loud rattling and knocking noise underneath and no one could figure out why. I went to eight different shops. Each one gave me a different guess: heat shields, engine mounts, catalytic converter, "play in the differential," you name it. Nothing made sense, and the noise was so annoying at red lights and/or with foot on the brake . Finally, one honest shop (Thanh Auto in Garden Grove) spotted the real culprit: a big clean crack in the aluminum mounting bracket attached to the differential housing. Every mechanic I spoke with afterward told me the same thing: "Only solution is to drop the entire differential and replace it." Translation: very expensive. Thanh's expert ( Keith) suggested welding the crack, but every welding shop I contacted said the same thing -- "No space. We'd have to remove the differential before welding. Almost as costly as replacing the whole diff." Then I found Jose at OC Fabrication on Yelp. Within minutes of sending him a photo, he replied ...fast, professional, and confident. He said it might be doable without removing the diff, but he needed to inspect in person. He even gave me two honest estimates: a higher price if the diff needed to come out, and a much lower one if he could reach it in place. He squeezed me in after hours the very next day. He and his welder Lorenzo crawled under the car, inspected the crack, and confirmed they could do it without removing anything. They carefully jacked the differential to realign the broken ear, cleaned the aluminum, welded it beautifully, and then reinforced it with additional metal. All in under 90 minutes. When we test drove the car afterward -- night and day. Smooth. Quiet. Solid. The rattling and knocking that haunted me for a weeek? Gone. Jose told me straight: most shops wouldn't even attempt this kind of repair. But he and Lorenzo took it on with skill, confidence, pride in their craft, and real customer care. They solved a problem that eight other shops shrugged at. I can't recommend these guys enough. Professional, talented, honest, and genuinely passionate about their work. Bravo, Jose and Lorenzo. Many thanks. Bonus: Their shop is amazing -- full of unique custom fabrication projects, metalwork, and creative builds. Kudos for their skill and craftsmanship and care.

Super friendly, fast response time, professional, and did great work. Highly recommend!read more

Called Chris out of the blue with some help with a custom bicycle rack idea for my truck. He…read moreturned my idea into a reality for a minimum amount and I'm happy with that. It wasn't a big job, but it was done well. Thanks Chris, may need your help with more of my ideas in the future.

Poor installation quality and customer service from Chris. Not damaging your vehicle is low on…read moretheir priority list as long as it gets done. Roll cage once damaged AFTER he powdercoated it during the installation. You'd think they would test fit prior to powder. I understand estimates are estimates, but not keeping you abreast of charges till bill due is poor business practice and the unwillingness to make things after the damage says volumes about this business and Chris as the proprietor.

I was totally satisfied and impressed by this company from the time I first spoke with Jeff and…read morethroughout the project. I installed a handrail on my front porch, which they did not treat as too small a job. The workers came, were courteous, and did a great job. We've had our share of poor contractors' shoddy work. So this company was so refreshing to work with. Thank you Jeff, Gloria and your installers.

Horrible initial experience, contacted Christ Argon with a fairly easy to make metal working audio…read morehi fi rack request, sent him a drawing of what I was thinking, he kept ignoring my emails, I also texted him he responded initially and then totally ghosted me. Really unprofessional and rude. Would never do work with Hand crafted metalworks again. Scam.

Sebastian did a terrific job adding a hitch receiver to my trailer. The prep work, welding, and…read morepainting are all top notch. Highly recommended!

Sebastian really came through. I had a project to cut through a couple 3x3 11 gauge steel…read morecrossmembers for my gym. I wasn't able to drop it off but he was able to workout a deal with my and came by my house to complete the job. He was quick to respond and took his time to make sure the cuts were smoothed out. Definitely recommend him if you have any metal working projects! I was able to complete my custom dumbbell stand with his help cutting the cross members.

What I can say is Carlos at Reyes ornamental iron has done a fantastic job! He built and installed…read morean iron gate at a Laguna Niguel home of my client. He is detailed and very knowledgeable about what needs to be done. My client is very satisfied, this is the company you want to use! Tony- Quarterback Construction.

Called Carlos to get an estimate for an iron railing. He arrived on time and assessed the…read moresituation. He gave me his professional opinion about improving work done before installing a railing. I really appreciated his effort and courtesy advising me to be happier in the long run before installing the railing. I appreciate his time and will definitely call him for any iron work. He has many years experience in his craft and he is also very informative and patient with clients. Thank you Carlos!

If you're looking for a responsive, quality welder, Metal Craft Industries is definitely the place!…read moreRod is an incredibly nice guy and does quality work at very affordable prices. Honestly... when I dropped off my aluminum welding project, I was pleasantly surprised when Rod told me it I could pick it up the following day! Rod, thank you so much for making my project a priority! I couldn't be more happier with the results!

They have done several projects for us and each time the railings, gates have turned out greatread more

I call Troy for all my welding needs. He's on time,professional and does great work. I don't need…read morewelding done often but when i do Troy is my go to guy.

I called Johnson Mobile Welding Service on Saturday about a small welding job I needed done. He saw…read morewhat I wanted done right away and was able to complete the job in less than an hour. Johnson Mobile Welding service has the experience you need for any welding/fabrication job. I highly recommend them.

I've been working with Genie Scientific for a couple of years now, and have nothing but good things…read moreto say about them. Their installation team is second-to-none; I've been blown away on multiple occasions by the hard work and effectiveness of their team. We had a difficult and heavily-customized job -- with their support we built into a world-class lab for our Industry. As for the fabricated materials (steel & countertops), the quality is top-notch. Considering their knowledge, support, and quality in the design of our lab -- they have cemented themselves as our go-to option for laboratory casework.

From the owner: Genie Scientific is a manufacturer and dealer of fume hoods, laboratory furniture, and related…read moreproducts. We offer design, manufacturing and installation all under one roof. Whether you need to build out a multi-million dollar facility or purchase a single fume hood we are here to serve, ship and install nationwide. Made in CA. The Complete Package: We can build it, Source it, and Install it.

I contacted several welding services to look at my rusted yard gates, and most of them told me I…read morehad no choice but to replace them entirely. Ismael was the only one who gave me a straight answer, telling me they could be repaired, and provided a very reasonable quote. The team did an incredible job and really focused on the details, from the welding itself to cleaning up the gates afterward. I truly appreciate the quality of their work and their honesty. I highly recommend Mick Welding Inc for anyone looking for skilled and professional service!

Very friendly and flexible. Was able to help me without much prior notice and at a very fair price!read more