I have a 2011 Honda Crosstour with approx 222k km. I device this vehicle regularly…read more brought it in for an oil change. They recommended I go for a full vehicle inspection since the vehicle has a higher milage. I agree to the "service B" for $95 After the full inspection and oil change, there were a few surprises. The following needed immediate attention - flush transmission fluid - change timing belt - rear diff fluid However, all of these were changed at 197k. I showed them the invoices fro the other auto shop. They say maybe the other guys used inferior products. That's why it needs replacement... Incidentally, mr. lube charges same for synthetic oil change and does the inspection for free

I've had the pleasure of having a few of my vehicles serviced by the staff here. From the front of…read morehouse staff to the mechanics, the service and work has always been top notch. The staff is very knowledgeable and they stand behind the quality of their work. Highly recommended!

I have always had great experiences at Jordani Motors. From sales to service the personnel at…read moreJordani Motors have shown their honesty and sincere. I'm not saying that Jordani Motors is perfect all the time for everyone, but in my experience they are as good as it gets in the similar business.

I purchased my car at this place. Joes is a solid and honest guy! Pleasure to do business with…read more Karim A.Hamir

Great people who enjoy what they do and it shows in their work abd they go out of their way to do…read morelittle things that were not even expected. Very happy with their work.

This time I went in for what I thought was an issue with my tires but it only took Trong less than…read morea block to determine that I was wrong.. bearings .. dang bearings were rubbing and so I trusted my primary ride to Trong and Peng.. she rides like brand new..what a sigh of relief to my ears ( no more humming) and to my peace of mind that I'm safe from those " specials " peeps who don't care about anyone else .. you know who you are As for HTV.. let it be Tires.. engine or body work, I don't hesitate in recommending Trong

These guys are amazing. Had new winter tirees put on my vehicle last minute and we're done by the…read moretime it took me to have a beer and a bite to eat at the Raven Pub. I highly recommend.

These guys are awesome. Work very quickly and communicate the process and all potential changes…read more Price transparent from the start. I feel very confident when dropping my car there, knowing that I'm going to get a fair and honest job done. Even though the last two times I took in two older beaters I was not anxious while they were being fixed. I had confidence that it was going to get done properly and fairly. Cheers!

I needed a brake line replaced on my F250 and they were able to do it in one day. Costed about…read more$250, I'm happy with the results

Great bunch of guys, needed a full muffler from the manifold back in a bad way, and they helped me…read moreout. The price was very reasonable and saved me a lot of money by finding parts on hand in the shop. They go out of there way to help you out. Thanks guys Don B.

Outstanding service! My company has been using them for almost 10 years now to service our fleet…read more They never disappoint.

i was referred to Peter Larsen. for an automotive shop to take care of maintaining my infinity …read more. They are honest people!! , and have good prices for someone in a budget .. i am very happy with them for all my car needs!... five star!...

Highly recommend this auto repair shop. Russell & co. are amazing, they explain the work required…read morein detail, great workmanship and you can trust they are prescribing only what's needed. I will always be going back to RJD and making sure all my family and friends do the same.

Russell and Richard are great to deal with. I drive a 1996 Mitsubishi Delica and came to RJD in…read more2018 when my old shop packed up and moved to Abbotsford. My experiences so far in the 5 or 6 times I've been in: they're honest, they do good work and have experience with Japanese imports, and they charge fair prices. They let you know what needs to be done and what might be "good to do" soon, but don't pressure you into getting non-essential work done (unless there's efficiency to be had because they'll be working on that part of your vehicle and you'd save on labour because they're already in there vs. doing it next time when they're not working in that part of the vehicle and your labour charges would be higher). I'd recommend RJD to anyone who wants good service, no bullsh*t, and friendly people. Plus the location is convenient (for me).

AVOID THESE GUYS AT ALL COSTS!! NO COMPENSATION AND ACCUSED ME OF POSSIBLY ATTEMPTING TO SCAM…read moreTHEM!! I had Alec's Machine Shop disassemble a pair of vintage 1976 Harley Davidson Shovelheads from my original numbers matching Police Special FLH. While inspecting the heads, minus the valves, springs, and valve guides, I noticed the guide "boss" hole on the rear head, looked "beat-up." Upon closer inspection and measurements, it was blatantly evident the "engine builder" neglected to remove the heavy carbon deposits from the portion of the valve guide behind the valve. He hit the front head exhaust guide with such violence while trying to remove it from the head, that it broke a third of the guide right off, and then actually managed to drive the rear head guide (with all the heavy carbon deposits still attached), through the aluminum guide hole boss, tearing up the hole and rendering the damage beyond viable repair. My initial phone call to Alberto (company phone-answerer), to tell him of the damage I had found, was met with instant incredulity, and doubtful accountability. I took both heads in to have the owner's of the establishment scrutinize the findings; again, met with instant proclamations of prior damage, to minimize, if not eliminate, any compensation. All 4 guides (iron), measured .565", (including the guide that came from the now torn up guide hole, measuring up to .593"), and 3 guide holes measured the same (.565"). The damaged exhaust guide hole measured between .570", erratically up to .593". The hole was now "egg-shaped" and off center. The repair would cost a minimum of $850.00 before tax, and could only be performed by an extremely experienced machinist with the right tools, of which this shop was NOT qualified to perform. When all was said and done, no compensation was given, and they basically accused me of attempting to "scam" them, as they claimed that the broken head "may not even be the head they disassembled." After having my 35 years of vintage Harley experience minimized to novice proportions, I couldn't take the inability of these people account for their incompetence. I left feeling completely defeated, never to return.

Best automotive machine shop period.. These guys really know…read morewhat they're doing and build some of the best motors out there. Their super knowledgeable, friendly staff, are more than happy to hold your hand through your whole build. They have done a few of my engines flawlessly. I don't know about you, but trusting who builds your motor is a pretty serious decision to make as far as I'm concerned. I'd let these guys pack my parachute. Nuff said..