Custom made a metal under mount for my stone sink and it fit perfectly. Very professional and…read moreresponsive! Great to work with .

Express Metal Services fabricated a few hundred feet of anodized aluminum flashing strips for…read moreweatherproofing pergola rafters. Their website's tool for specifying the various shapes and lengths gave me confidence I would get what I needed. Mark was very helpful answering all my questions and making sure the order was ready on time. The pieces came out very nicely; I'm happy with the quality.

Dear Yelp users, I…read morewanted to take the time out of my evening to write a brief review about Able Sheet Metal. They've not only accommodated my custom needs but they surpassed them with flying colors! They take the time to consider your needs and apply their skills towards them. All products were delivered on time and in great condition. Strongly recommend. I hope my review was helpful. Thanks, Robert.

Been working with General Brite Plating for quite sometime. Allan is owner and he's darling and a…read morepleasure to work with.

2 1/2 weeks, 3 emails and 3 phone calls to get a single, and what I think was an insanely high,…read morequote. Could be out of whack, I don't get lots of brass plating quotes.

Thank you to David at Edward Sheet Metal for helping us with custom ductwork and linear registers…read morefor our new home! Everything was delivered on time, and he even followed up afterward to make sure everything was working perfectly. Truly great service!

This guy makes my of my out of ordinary raceways and gutters for electrical jobs. I am an…read moreelectrician . He's always quick to accommodate me, does a great job and very reasonably priced. Thank you David.

Good prices. Friendly service. Definitely go here vs any big box fit metal. I'm an amateur / hobby…read moremetal worker, for reference.

If you're looking for industrial metals M & K Metals is the best local place. They sell big metal…read morein big quantity, bigger than I can use for my projects. so MY favorite part of the biz is the "REM"s section. (REM = Remainders) That's where they sell the left over cut scraps of all kinds of metal. I can usually find something that will work for my current project there. I'm usually looking for angle or square tube. Today I found a piece of flat aluminum - perfect for my project. About 5 pounds. $14 out the door. :-) FYI: REMs sell by the pound, at something like half price versus the full size pieces. When you buy rems, you weight it on the scale by the front door across from the cashiers. I'll upload a photo of their current price sheet for REMs. The REM prices are posted in the REM area, which is straight through the retail store & then turn left. Customers are allowed in the REM area. M&K is also improving the wares in their store. They are selling more helpful pre-built metal parts than they used to. Gate hinges, bolts, nuts, lock boxes for steel screen doors, weld on tabs, casters, tools, drill bits, grinding wheels, gloves, & more.

been going there for materials long time now…read more it usally has what I need for my hobby thankks IPS

BUYER BEWARE - I purchased a Eron 6" swivel base for my milling machine P/N E-288 / No150 BASE…read moreONLY. It was advertised as "NIB" new in the box. When I opened the box, the swivel base was completely rusted. It is unusable as is. I contact IPS twice with photos asking them to make it right. They have never responded. So now I have a $90 chunk of rusted metal. WORTHLESS and terrible customer service!

Since my last review of smaller projects/repairs (experience was good), I've brought them more…read morebusiness, thousands dollars' worth of business. Everything is good when they are TAKING your money and business. But, once it goes the opposite way (refund), Roger gets NASTY -- I didn't see this side of him before, always with a smile because while taking money in. I brought some parts to be replicated; 1" shaft with the center with a 2" diameter cylinder with 1" flanged bearings. I was suggested another way to "make" the part that would make everything more "simplified" for me, okay, sure. I wasn't sure what he meant, but after minutes of trying to explain to me, I just went with whatever Roger suggested since he would know better about the mechanics of machine parts, etc., He just told me that I would have to source the bearings myself, which is what I did. He asked me if the diameter could be smaller and I said yes. So I trusted his word and went with it. When I picked up the item, he said, "If it doesn't work out, just bring it back". The thing is, I complained after because what he sold me for almost $400, was NOT SOMETHING HE "MADE". It was a part that could be bought online (~16", 1" shaft with 2 shaft collars), which can be found on Amazon for $35 (shaft) + $10 (2 collars). He then said that he bought it McMasterCarr, then quickly changed his wording to "WE MADE IT". So which is it? (I will never know, but my assumption is he got it at McMasterCarr, as he first stated, or another retailer). Then he said, "I'M NOT HERE TO SAVE YOU MONEY." JUST WOW!! It's my fault for not understanding what he was trying to sell me, but it's obvious my lack of knowledge was taken advantage of--I let Roger do what he does. I believe there is a big difference between MAKING something and up charging for labor, etc., vs. buying $40 dollars worth of parts and CHARGING 9X-10X more!! Especially, to someone (me) whom he kept calling "friend" after all the visits/business I gave him. When he did this "work", I also dropped off a small part that had a broken screw stuck in it. He said it was FREE OF CHARGE to extract it. Anyway, when he agreed to refund me for the $400 (16" piece of 1" shaft), BUT he charged me $85 for the screw extraction that he told me that was free! From ~$400 refund, I received $85 less. This costs him nothing (almost literally) to fix easily. $85 FOR A SCREW EXTRACTION--HIGHWAY ROBBERY!!!! He gave it back to me, with a new screw, "I also gave you a screw". (Oh, gee, Thanks, I guess.)--But I didn't need that screw as I have 100's (if not 1000's) of these screws for my parts -- so he acted like giving me this screw in place of the broken one is a huge hook up, after I spent thousands and thousands of dollars here. I paid for this with my personal credit card, but he made out the refund check to the company I work for. So I asked him if he could cut the check out in my name since I'm the one who paid for it. He said, "just give it to your company and have them pay you." I explained to him that I can't do that because of accounting issues, etc. He got mad and he snatched the check out of my hand with an attitude. This right was the last straw. I was still going to give him more business (which I even told him, thanks for the refund and making this right, I'll be back). He told me, "I DONT CARE ABOUT MAKING THINGS RIGHT AND WHAT YOU THINK, I DONT NEED TO RESTORE FAITH IN YOU OR YOUR COMPANY". Okay, fine. ^Great attitude, perfect way to lose business after the fact that I stated that I hope this one issue won't affect future business and that I would be bringing more business. Roger shouldn't be interacting with customers on the front line if that's his attitude and represents your company. On the other hand, Alex is very polite. While Roger was deflecting the situation, blaming it on me, arguing who said what, this and that. Alex is the one who apologized on behalf of C&H Metal with a smile on his face, while Roger was steaming mad at the situation -- just the way he snatched the check out of my hand says it all. ALEX IS THE REAL MVP at C&H Metal, too bad he's not at top management, because management up top is clearly lacking customer service skills and lacking know-how to keep the customer acquisition costs low. I can bet they'll see this review and Google what CAC is because they don't know. Or maybe, they are making so much money, they don't care how they lose a few customers the way they do. Roger (mgmt) just knows how to take money with a smile on their face until you complain about something, then it gets nasty. This is the type of business you don't want to give business to. If you do give business to them, good luck. Hopefully, it's a short stint because eventually an issue will arise, and Roger has a short fuse, and you may not like the way he handles it. This experience was a blessing in disguise because I found a better and CHEAPER shop to do work for me.

From start to finish, their communication and service were top notch. I've been trying to find…read moresomeone to help with a fabrication for a kitchen hood vent, and finally, found the right company to do it! I would strongly recommend using C & H for your any of your fabrication needs. Great job!

Erick at J&J Sheet metal did an amazing job with the production of a fast paced job we had for him…read more His prices are very reasonable and his turnaround time is the best from all the vendors I called. I would highly recommend his services and will use him in the future.

Needed some metal fabrication and Eric was very responsive and has the experience needed to…read morefabricate the parts. He has every machine needed to get the job done properly and efficiently! Thank you so much!