I can't explain how unsatisfied I am with the work of this company…read more 1. New panel upgrade. Hole is still in my wall and the way they hooked up the electrical in the bathroom, we keep blowing fuses. 2. New pavers in backyard. After the rains, it is clear they leveled it where the water runs to my bedroom walls. My bedroom floors are wet. Also, pavers were set with only sand and we can't stop tracking it in my house and there are large gaps of places without sand which I can only imagine will lead to shifting. 3. Insulation issue with the bathroom door. Oshri came and stuck insulation around the door that fell off about an hour after he left. I have tried to get a hold of the owner and no response. There are so many more less than favorable things I can say about the work, from poor paint jobs and spackling, to the time in which this work took. He uses handymen to do jobs which should be done by professionals.

I am so happy that green energy remodeling decided to get a Yelp page these guys were amazing they…read moreshowed up on time step-by-step they explain what's going to go with my bathroom every night when they went home they replace my toilet so I can take care of my business the price I don't know it might have been I took meds price on my estimates but I really like this company that you did a great job and I wouldn't use them again thank u g e remodeling

I came in today in urgency to get a part for my boss. When I walked in. The old man with grey hairs…read moreand glasses just starred at me like he'd never seen another human in his life before. I awkwardly said hi and proceed to explain what I was looking for. After explaining he stayed sitting down and sarcastically said that I needed to do something that was obviously wrong. Then he said that there wasn't anything that I was looking for there. This was absolutely the worst visit I have ever had to any store in my life. I never write reviews but this guy deserves to be know. Do not come to this store unless you want terrible service and absolutely zero help. As I walked out he finally stood up to watch me leave and stayed standing and starring at my car until i completely drove away.

Really depends on who you talk to. I've been here twice for the same reason, to get replacement…read moreballasts for under the counter light fixtures. First time, they gave me the wrong part, and when I came back in a different guy figured it out and it was fine. Several months pass and I come in for the exact same thing, and they gave me the wrong part again, and insisted they didn't have the correct one. It had been so long I didn't remember which was the right one,so shame on me. I'm not a commercial electrical contractor and I'm sure they do well for a lot of things, but I don't understand how they can't get a reasonably standard part right.

We found this store by accident and how lucky we were! Phil was the man that helped us and he is…read moreextremely knowledgeable. He was able to answer our questions and guide us in the right direction. So glad he was there to help us.

They had whatever we needed in stock, Phil and Ben helped us to choose the right product that we…read moreneeded. The price was great very reasonable

Terrible / horrible customer service...went to their Supulveda Blvd location....to replace a 240…read moredouble pole 20 amp GFCI breaker for pool equipment--even brought old Siemens breaker. Place was empty but the worker had zero interest in helping, came up with all kinds of double speak as though the breaker could not be replace---huh what??? Went to another store down the street and was in / out with the new breaker in 10 minutes. What kind of electric supply is this?? Maybe that's why it was empty of customers.

The best electric supply, quality material the people are very friendly. I can recommend you guys.read more

Lol not true but when you're desperate go for it- you lost my business and my referrals - found an…read moreexcellent plumber and is very professional. Fax? Really? Lol

All I can say is wow! I spent the majority of my day yesterday trying to fix a PVC plumbing issue…read morewhich caused me to have the water shut off for my entire house. With 7 kids in the house you can imagine what a nightmare that was. I finally gave up around 3pm and called All Plumbing. Dave answered and when I explained my problem to him, he told me what I was doing wrong and how to fix it so he didn't have to charge me to come out. 5pm and I tried his suggestion but realized I was in over my head and still couldn't get anything to work. So called him back and he said he would be here in an hour. He showed up early and instead of charging me some horrendous amount of money because it was a Sunday night before Labor Day, he charged me for a typical service call. It's very rare, in my opinion, to have a contractor let alone a plumber who isn't just trying to make a fast buck. Dave proved to me twice yesterday that it's not the kind of person he is. I highly recommend this company for an honest plumber who gets the job done right!!! Thanks Dave!!!!!

Good quality equipment and parts, perfectly designed website, it's very convenient to order…read moreeverything and calculate the job price

The team at this location is awesome, always ready to help and in various occasions have taken care…read moreof last minute deliveries making sure I'm able to take care of my customers. My only supplie house will con5inure to shop here.

THANK YOU ISIDRO!!!! What a God-send and so helpful in FINALLY finishing my "simple, basic" valve…read morereplacement! 3 of the 4 lever handles in our hall bathroom sinks were dripping and turned off last month until I could get to it. My local plumbing supply closed last year (RIP Larry & Joe's on Sepulveda). I did manage to find 2 cold side valve stems at ACE, but I needed 2 hot side valves. (For these split mount seats, the threads run in opposite directions for hot v cold.) James at ACE suggested Tapo Plumbing Supply. I was so happy to hear there IS a supply company still operating in the SFV. Off we went. Ricardo & Isidro welcomed us in and I showed them my cold valve and told them I needed 2 hot valves, w/in minutes, Isidro had my valves and rang me up. Well, of COURSE nothing goes as one plans! It's always something, as Mom use to say. I got 2 cold and 1 hot valve in by 5pm and then came the final valve, which WOULD NOT BUDGE!!!!! I tried Liquid Wrench, I tried heating it - all the things recommended on YouTube. Nothing. I was also exhausted at this point, twisting my body under sink cabinets, working in tight spots for a project that should all be done "quite easily" from the top mount of the sink handle. But nooo.... I gave up for the night, realizing I would have to remove the valve sleeve from under the sink, an area in which none of my tools would fit, so special tools were needed. Next morning, back to ACE at 8am, for TWO the wrenches required. Back home. Ok, under sink, wrenches work, pipe comes out. STILL, I had the issue of the valve stem stuck in the housing. After many attempts anchoring the piece in a vice grip and trying different tools, it was clearly not interested in vacating that pipe and I clearly had stripped the outside of the hex bolt 'til almost round. Frustrated, I resigned myself to the fact a new pipe housing would have to be found. I was set to return to Tapo when Hubs suggested hitting the other "usual hardware haunts" along the way. We did, no one had the pipe. I walked back into Tapo and Isidro was there to greet me again. I showed home my challenge and asked about the pipe. He slowly shook his head, turning it over in his hand. 'I have something similar, but it's not the Pfister piece you need.' He brought it out and while I was ruminating, he took the old piece into the back. I started asking AI about the 2 different pieces and what else I could do to make a 2026 available pipe work under a cramped 1962 sink when Isidro reemerged from the back, now holding 2 pieces instead of 1 stuck piece. 'Oh ISIDRO! You DID IT!!! You got them unstuck! YAY!!!' He smiled and said it wasn't easy and now he has grease and water over him. I agreed 'Welcome to my last 2 days. I'm usually quite cute!' I asked what I owed him and he waved me off. How WONDERFUL it is to have a REAL plumbing supply shop like Tapo! Skip the "other guys", help keep this local business busy and come to Tapo Plumbing Supply for ALL your plumbing needs. Cheers! "CC"

Got overcharged for simple pipe fittings and a valve. I didn't know what I needed would cost…read morealtogether but when I was walking out to my car I noticed i was charged for 5 of a washing machine valve that was not part of my order at all. Adding an extra $120+ to my order. Maybe it was an error. Something leftover on an old invoice. But you'd think that when an order comes up over $120 more than what it seems like it should cost, the ringer would say, "what a minute, that doesn't seem right." After pointing out the discrepancy the employee corrected the invoice and refunded the difference on my card. So I'm going to hope it was just an honest mistake. But I'll be going elsewhere for my plumbing needs next time.

Excellent service! On time, very knowledgeable and…read morehad the system up and running within no time. Highly recommend!

Honest, professional, completed the work promptly and below the estimate. Highly recommendedread more