This was my first time at a metal fabricator, and I honestly had no idea what to expect. IF I KNEW…read moreWHAT I WAS GETTING, I WOULD HAVE STOPPED BY AGES AGO!! Even if I had expectations, Steve's service would have demolished them. I go into the shop, expecting to hear back in a week or so, and within ten minutes of leaving his shop, he calls us saying that the bed frame piece was fixed. I had been struggling with this project for almost two weeks, and Steve managed to fix it faster than the drive-tru at ChicFilA. I am still shocked and amazed at the affordable price and quick turnaround I received. If you have some stupidly proprietary piece of metal from some project that you have bungled, don't waste your time searching for an affordable replacement which will never exist. Save time and just take it to Steve so he can give you the result you initially wanted from the beginning.

I cannot say enough good things about Create Cut Invent's service. I had a smaller sized request…read morefor custom steel plates; other services did not even bother to respond to the request, but Steven replied quickly. Once the details were finalized, it was turned around in just a few hours and it was exactly what I needed! Steven was extremely generous with his time and advice. His incredibly friendly personality paired with enthusiasm for the craft is rare to find these days. Beyond the excellent work, the owner is a Chicago legend. Honored to have Steven's services so close by in the Western Suburbs. I will definitely be using them again for any fabrication!

I contacted 3G ( Dave ) after three fence repair companies didn't come through with the…read morenon-standard part needed to repair my aluminum fence gate latch. Although 3G does larger, more complicated fabrications and the part I needed was small scale, Dave came through with 5 gold stars. His charge was extremely reasonable. THANK YOU 3 G / Dave !!!!!

From the owner: High end attention to detail. Customer satisfaction is paramount. Professional, courteous, and…read morehonest fabrication company. Specialize in METAL only fabrication and repair. -trailer repair/hitch fabrication -powder coating available -water, laser, and plasma cutting available -one off custom fabrication -chassis/frame repair/fabrication -railing design, fabrication, and installation. -staircase and decking repair/fabrication/installation

Thanks you guys for the hard work my parts look great thanks you see you again for more stuffread more

First class company. Actually cares about their customers and the finished product. Great work to…read moreback up great service. Highly recommend.

These guys are really great! I have been a mason contractor for 46 years and gone to them since…read morefinding out about them for everything from the fabrication of structural components for work to smaller projects for home. They have always been quick, friendly and fair. Right now they are fabricating parts for a motorcycle seat for my dog and when the project is complete I will post the pics! Any welding or fabricating I need these are the guys!

I would like to thank Joe Sawisch and the entire C & S family for making a custom urn for my…read morebeloved son! They also donated the material and the time to make the urn!! The craftsmanship blew my wife and I away and can not thank them enough for not just making the beautiful urn but knowing they offered to make it for us!! And we didn't ask them to do this!! Which makes this priceless to my wife and I!!! Their craftsmanship is second to none and I highly recommend C@S FABRICATION SERVICES!! THANK YOU JOE SAWISCH AND C@S!!!!

If you want some custom work done, this is the place to go. These guys are pros. Highly…read morerecommended for those who want the best for their vehicle.

First off Ben and his team at Hocman Fabrication And Speed are certainly leaders of their…read moreindustry!! I first met Ben as a fellow sponsor for our club Chicago Auto Club West (CACW) and got to know him fairly well before having used his services. He was always the first one to jump in and help or provide advice on other projects. After being to his business and seeing his meticulous custom fabrication skills on several occasions I was reassured he was going to be the only choice among many other that I truly felt 100% confident in completing the work on my 2020 Ferrari 812 Superfast project. Ben and his team walked me through every step and what to expect prior to even dropping off the 812 Superfast. Almost instantly after dropping off the Ferrari with him, he was sending me consistent updates via text, photos and best of all high quality videos explaining exactly what was going on. There wasn't any point of time during the project that I had to call him or go check in on the progress, he was reaching out to me so I always knew the status. This was honestly the best customer service I've ever seen! Hochman Fabrication And Speed was installing a Fabspeed exhaust, Novitec Sport Springs and Spacers on the 812 Superfast for me that I had already purchased. Looking back at it I should have been more patient and went with one of his custom fabricated exhaust since we ran into a design flaw with the exhaust I brought him. After installing the exhaust Ben quickly caught things weren't sealing properly causing a leak. His experience and skill was proven at this point because he analyzed the problem, had the solution, fixed the issue and was back on track in under 30min!! This blew my mind! Most other would have probably spent countless hours trying to figure it out or walked away. Not these guys! They pushed through and had it resolved in not time at all!! Getting into this project I was expecting Hochman Fabrication And Speed to need the Ferrari for about a week. To my surprise they were able to knock out everything in 3 days with no corners cut and everything tested to ensure a high quality install!! Since they were installing new springs on a car that has a front lift and tinkering with the exhaust I was anticipating possible dashlight, codes or calibration that would be done by a Ferrari service center and I don't know how Ben and his team did it but that was not the case at all!!!! After their work no dash lights came on, front lift in full working order and nothing needs calibration! Which probably saved me a good chuck of change if I had to take it to the stealership. Thank you Ben and the team at Hocman Fabrication And Speed!! You all have earned a customer for life and can't wait to bring you the next project!!

The railing on our front stairs was very unsafe so we reached out…read moreto find someone who could replace the railing. Gabriel got back to us the same day with a quote after we sent him photos of the steps. He was very responsive and made three trips out to deal with the project. The first was to take detailed measurements of our stairs. The second was a fit up of the uncoated railing where he took final dimensions and cored the mounting holes and the third was to actually install the rails after powder coating. We are very happy both with the product and Gabriel's responsiveness and professionalism. We would use him again although the raisl will probably last for decades.

We are absolutely in love with our new bannister! I messaged here on Yelp and Gabriel responded…read moreright away; came to our house two days later to measure the space and provided a quote that night. His pricing was much more reasonable than other quotes we received. He kept me apprised along the way when he was almost done with iron working the bannister and asked if we wanted powder coating (slightly extra cost) which we did opt in for. The day of install was fast - Gabriel did the install and there was no dust or particles left on our floor after he was done drilling to the ground. The little things like that make a difference to me! Would definitely recommend Gabriel!

Thank you for your professionally service.Brian helped me many times when I needed different…read morematerials or advice. Thank you Brian.Regards -Voytek

These folks are good at what they do and have great customer service. I needed just needed a tab…read morewelded back onto a frame for a bunk bed, and we were in-and-out in less than 20 minutes. They even painted the weld! I was expecting to have to do that myself but was pleasantly surprised by these folks going above and beyond what I expected.