Great people. Extremely accommodating to my small project and short turnaround. Did 1st rate work…read moreand were very competitively priced. I recommend them unconditionally.

Rudy did a great job. I was planning on getting it back and sanding and painting the part but when…read moreI picked it up it was already done. Awesome job.

I needed thick steel lawn edging cut and saw the excellent reviews for RB's Welding here on Yelp,…read moreso I decided to give Bruce a call. I called on a Sunday and left a message, but didn't expect a call back the same day. To my surprise, I got a call back 30 minutes later. The next day, I dropped off the pieces I needed cut and went over exactly what I needed. I picked up the cut pieces that afternoon. They were exactly as I specified and at an amazing price!

I hired Bruce for an exterior metal staircase repair. There are various degrees of rust on the…read morestaircase due to years of rain, and the other contractors had given me bids that involved having to replace many parts on the staircase to having to replace the whole staircase. The bid went from $1300 to $12,500. Talk about being taken for a ride by these folks! Only one other welder told me the staircase itself is fine. Bruce was the last welder I contacted. He was punctual, courteous, very professional and knowledgeable. He identified one problem area and proposed a fix that cost less than $300. He and another welder came the day of the appointed time and worked efficiently to apply the fix. Honest contractors are hard to come by these days, I would hire Bruce again in a heart beat! I highly recommend this business.

Dan has fixed many things for me from broken kitchen cabinets, leaky toilets, loose faucets, ans…read morebroken yard gates. All repairs have been solid and at a fair price.

Dan did a great job from start to finish. We had to find a part and he meticulously worked from…read morestart to finish to find it. Great work Dan.

I can not speak highly enough about Jason and Reid, and my experience with them. A contractor I…read morehired, had hired a welder to do my guest house stairs. Long story short, 3 months later they still weren't done. I happened to walk my dog one afternoon and ran into RCR Squared doing some welding work for our HOA neighborhood mailboxes. I asked Reid if he would come give me an opinion on something that didn't make sense to me but I'm not a welder so what would I know. Reid was gracious enough to come take a look while his team continued working on the mailboxes. When Reid saw the stairs he was in shock and could not believe what he was seeing. He then filmed a 10 minute video pointing out all the things that were done incorrectly, not to code and that were extremely dangerous for me to send to my contractor. I had been waiting 3 months for these stairs and desperately needed to be able to get into the guest house, as we were going to be up there during the construction on my main house that was starting in 2 weeks (thank god I have a different contractor for my main house). Reid & Jason gave me a bid to demo and rebuild the stairs and said they could do it right away and get it done quickly. I told them as much as i wanted to hire them I was having another welder come look, just to get another opinion and would get back to them. A welder my main contractor knows and trusted and he confirmed everything Jason and Reid had told me but couldn't do the job for 3 months and that wasn't an option. So I called them back and hired them. Honestly, I think Reid and Jason took pity on me and squeezed in my project. They started the following Monday. They thought they could get the basic stairs built in 3 days (with no trim or paint) so we could get up there before July 4th holiday, but because they had to redo the lower section of the stairs that they originally thought they could keep, it didn't get done till the following week. They took off for the holiday weekend and were back early Tuesday morning. At the time the temperature drastically changed and got ridiculously hot and of course the stairs were in full sun. It was brutal but they came in everyday with a smile. The whole team was very friendly and hard working. By Friday they had the stairs done and primed so we were able to move stuff uptairs that we desperately need out of the main house over the weekend and they came back on Monday to finish the painting. RCR square was truly a godsend to me. If I hadn't have run into them that day, and Reid didn't take a few minutes to look at the stairs I would NEVER have known until someone got hurt, which could have been years down the line, just how dangerous these stairs were. The weight of the stairs also could have taken down my storage shed and garage because the proper supports were not put inside the wall when they redid the storage shed and landing. What a nightmare that could have been. The main things I want you to know from my experience with them are that they have a very experienced team, they show up when they say they will, and work as hard as they can to get your job completed on time. They can't control holidays and weather but they will work as hard as they can to get your job done correctly. They literally got my stairs done exactly when I needed them done. I would have been royally screwed without them. Can't not speak more highly of all of these men! Thank you Jason, Reid and all the guys. You all saved me and are truly the BEST!!! Would absolutely hire them again. And am happy to be a referral for them. Heather

I had a factory weld break on my Pontoon which caused it to take on water. I call RCR Squared and…read morewithin the first few rings I had a answer. The crew came to my house to do the repair. The owner was very friendly as well as his helper. They showed up on time and went right to work. Quick and efficient. They even helped me out a few minor fixes without complaint or up charges. Amazing welds done on Aluminum.

Eric built a custom dock plate for our warehouse and did an excellent job. He communicated clearly,…read moresourced solid materials, finished on schedule, and left the workspace spotless. Highly recommend.

Eric fixed a bend in our old decorative iron gate that had been damaged by the mowing crew. He…read morestraightened it out so that it also fixed the latch so that it matched up and works perfectly. This is the second time he has done a repair on an iron gate for us, and both times he has been prompt, professional, and fixed the problem in short order. Highly recommend him!!

I had these guys make some custom parts for an aircraft tug, and they knocked it out of the park. I…read morewasn't sure if I'd be able to use the tug again, as the parts are so specialized. But these guys made it happen.

I design and build analytical testing laboratories through the US so know quality fabrication and…read morewelding work. I brought a project to Astro Mechanics and was very impressed with their service and work. Jeff worked through the design with me, sent me drawings, made some changes, and then built it. The welding was top notch, choice of materials (thickness of wall, etc.) was spot on, and everything was perfectly straight. Nothing but good to say. Use them.

I wanted a modern style horizontal plank fence put up around the property and Noe delivered!…read more He works with different styles and materials and knows you can tell he has a lot of experience in his craft. He came back when there was an issue and fixed it promptly. I would highly recommend him to anyone

We are beyond happy with our new fence! Noe listened to exactly what we wanted and was great with…read morecommunicating with us. Will definitely use them again

Purchased roof flashings, vent covers, and skylights from here. Great condition. Reasonable pricing…read moreand quick turn around.

North Austin staple for sheet metal flashing work. I have…read moreworked with these guy for over ten years. I highly recommend them.