Randy was very helpful when we called about a fireplace screen for our stone fireplace in our…read morefamily room. We are extremely pleased with how it looks. It didn't take long to get it installed.

Randy the owner of Iron Passion was hired to do a spiral staircase for our back deck. After weeks…read moreof delays the stairs were finally ready for installation. 1. The concrete pad they put in for the base was sloppy at best. His workers left clumps of concrete on my iron fence that I had to clean of, splashes of concrete on our porch and newly painted columns. They also exposed our internet cable while digging the footing and said they would re-bury the cable before pouring the concrete. They didn't and when they installed the stairs they drilled through the cable. We now have to have a new cable bored under our driveway. 2. When stairs arrived, they didn't fit in the opening. They then asked it they could remove post on the porch to get them to "fit". They were then supposed to replace the railings, which they didn't. They left a 2' opening that drops directly off the porch. (See photo). 3. The stairs didn't fit because the weren't built correctly. The platform at the top was to fall in the middle of existing rails, which they did not. The bottom step was to face driveway, so when you stepped off, you would step on to the driveway. Because they were built wrong, you step off at the edge of the concrete pad into the rocks. 4. They didn't do any sort of bracing on the stairs. They used screws that are screwed directly in to the existing porch 2x4's. Those screws will quickly become loose and break away without support causing the stairs to be unsafe. 5. I have requested for Randy to come out and inspect the work, which he has refused to do. Please consider hiring this company to do any work. They don't see the job through and could careless if any problems occur and do nothing to correct them

These guys are excellent. They are precise and take pride in their work. The made a shower door…read morepart for me that was no longer made. They also can make many items out of metal including a design or house numbers laser cut in metal for a modern element to your home. And they are nice guys, too. Try them!

From the owner: Products: Metals…read more Services: Wire edm, Die sink EDM, Plasma cut, Machine Shop Services, Metal Fabrication, Welding Services, CNC Milling, Tooling Repair Services, Custom EDM Sinkers, Wire Cutting, Sinker EDM Spot Face, Big Hex, Sinker EDM, Small Hex, Steel Fabrication, CNC Turning Center, Metal Repairs, Steel Repairs, Equipment Repair, Medical And Food Industry Supplies Manufacturing, Handrail Welding, Structural Steel Welding, Design & Engineering, Cutting, Custom Work Specialties: Fast Hole Drill, Wire Machines, Charmilles D10, Chevalier 408, Roboform 22 Sinker, Sinker Machines, Wire EDM Gear, Metal Products, Fabrication, Sharp Milling, Surface Grinding, CNC, Molds, Prototyping

We had a project in Dallas and needed a new custom roof curb company. They not only met our needs…read morebut made what I can say was the cleanest most well constructed roof curb I have ever used. Our office in Dallas is here to stay and these guys meet and exceed expectations. Ask for Jennifer and prepare to be wow'd!

Teco Metal products is one of our great suppliers of metal products If your buisness needs…read morefabricated metals give them a call!

Been doing business with TPP for 25 years , quick turn around time, and great pricing !read more

I really hate to write this review. I really do. I've been a loyal customer for 26 years. I…read moreused to own a shop and we did all of our plating at TPP. I got out of the business but still brought my personal projects to TPP and they always did fantastic work. Over the years they got slower and slower on the turn around. After today I'm no longer a customer. I started a small business a few months ago, and started bringing in stuff to get anodized. Turn around has been slow 2 weeks or more, and then finally on my last order they messed up 1/3 of my order. They didn't even notice the mistakes and I had to drive all the way back over after getting home and opening up the wrapped parts. I drove straight back over to get this resolved and they agreed to redo the parts with the problems. I was told they would be done on Monday (this was a Friday afternoon) Monday rolled around and no one called. Tuesday. No one called. Wednesday and Thursday, no calls. Friday I called and was told that they would get them done on Monday.... that was today. Today I went to get my parts whether they were done or not. They weren't done. They haven't even stripped off the old anodizing. No refund was offered for work that I paid for that they didn't complete. No apology was offered. Now I have to pay another shop to fix the problems that TPP caused, as well as pay them to redo the anodizing. TPP is not a place that I trust my business with anymore.

I had a large iron gate that started to drag due to the brick column shifting. Originally I paid a…read morefoundation company to secure the column foundation, but that was not sufficient. We reached out for quotes and specifically required them to outline the repair and why they thought it was best. Capital Welding was able to properly identify the root cause after inspection and even identified deficiencies performed on a previous repair. They did an amazing job, paid attention to the little details and obsessed about the quality of their work. Great price, exceptional service, open and honest communication, and stayed late to make sure everything was to expectation. As an added bonus, they told me that they were going to come back and add a plate to cover a whole that they saw wasps coming in and out of. Wasn't part of the scope of work, it was just something they did to enhance the service. I would highly recommend this company on all levels.

"Axel did an excellent job! He arrived on time, was professional, and his pricing was very…read morereasonable compared to others in the market. He's now my go-to person for all my welding needs. Highly recommended!"

Good fabricators and nice people. They have great senses of humor too!…read more If it's a welding job - they get'er done...

Fantastic team! They're not only talented fabricators but also great people who make every project…read moresmooth and enjoyable. The welding work is always clean, solid, and finished on schedule. Their humor and positive energy make them a joy to work with they really "get'er done!"

Bandy is a sheet metal fabrication house, if you're looking on Yelp, then you probably already know…read morethat. They do all their work in-house and have a good design group too. Just tell them what you need and they can design it for you. Or, if you're like us, we'll design it and they can tell us if they can do it. If they can't, they can suggest what can be done to make it manufacture-able. Their work is pretty good. Spot welds aren't always a flat as we'd like them to be. After we get their work, we have it powder coated elsewhere and some of the imperfections can be seen through the paint. It's not blatantly conspicuous, but it's not as inconspicuous as I'd like it to be. Their work is average and their cost is below average, so you're getting a good deal on a decent product.