I have used Cartesian Origins for a number of welding and fabrication mobile welding and…read morefabrication projects. They are very dependable, do good quality work, and often have the work done in the time it takes other shops to even respond to my requests. Highly recommended.

From the owner: we are a business that caters to our customer needs, We are on call 24 hours a day 7 days a week…read morefor emergency welding repair

My 2019 Forest River travel trailer developed a crack in the frame where the axle bracket is welded…read moreto the frame. I spent several months going through inspections with their authorized service center and had to wait while Forest River and the frame manufacturer developed a repair plan. In the end, the service center was unable to do the repair and my alternatives were to either drive my trailer to their plant in Indiana or find a local welder. Jeff at Furrion has great reviews and a friend also recommended him. He developed a plan similar to Forest Rivers' and repaired the cracks (he found a crack starting on the opposite axle weld as well) and welded 30 x 4-1/2 inch 1/4 inch plates on both sides of the frame, as well as some 2 x 2 angle iron to reinforce the frame both in front of and behind the axle welds. I am extremely happy with the results of the repair and will not hesitate to have Jeff do any future repairs or fabrication I might need. Forest River has also stepped up and agreed to reimburse me the cost of the repair as it met their plan specifications. I would add that another RV repair shop that does perform welding services refused to even attempt this job. Thanks again Jeff!

This review is strictly for the communication I had with Jeff based on my inquiry through Yelp…read moreabout getting some metal work done. Although Jeff didn't have the capability of doing the work I'd requested, his responses were very prompt, friendly, thorough, and VERY helpful! Jeff was able to give me some suggestions for places to check with, and I'd never have thought of doing that were it nor for his suggestion. If you need any metal work done, I'd recommend checking with Furion Fabrication.

I needed a very small job done, just a metal tube that needed a thread cut into it in order to have…read morea ceiling light fit just right. I was amazed by how friendly the staff were, they jumped right up and acted like this was their biggest order of the year. They got it done the same day and for very little charge. I didn't know that this gem of a business (and a HUGE machine shop) was right in my own neighborhood. I couldn't recommend them any more highly - for any job big or small!

I needed a small job done and P & J Machine Works got right on it. They are so nice and…read moreprofessional and good pricing. I highly recommend this shop.

Thesre guys are great! They took on a very small project that no body else would touch and knocked…read moreit out of the ballpark. Plus their prices seemed very fair for the quality of work they did.

From the owner: Fabrication Enterprises, Inc. was established in Portland, OR in 1987, and offers a full range of…read moremachine shop and welding shop services. Our services include: Machine shops CNC Milling Commercial welding In

Our company was searching for a reliable machine shop and came across M&J Manufacturing. We were…read moreimmediately impressed by their professionalism and the quality of their work. We deal with very precise, complex parts, and many other shops were hesitant to take on the job after reviewing our drawings. M&J not only accepted the challenge but delivered excellent results. We highly recommend this shop.

They treated me so well! I had my 1969 Chevelle heads get worked on and it came out great! I have…read morenever had a manufacturing place do me as well as M&J did! I highly recommend them to work on any of your cars!

I own a 1960 Chevy Belair. I knew it had a burnt valve when I bought it, but it was all original…read moreand in such great shape at such a superb deal, I couldn't pass it up. We just don't find these rare cream puffs much anymore! After the head was taken off by a mechanic, he found out it had a cracked piston below that burnt valve. So, I did a ton of research, and where it used to be you could find machine shops all over the city - NOT ANY MORE! One place had a 9 month waiting list! Whoa! I finally found James, at Independent Cylinder Head. He could work on my engine in about 2 weeks! And the quoted price was really reasonable too!! Super nice and helpful on the phone, and after talking to him for a while, I find out he has tons of experience at other machine shops. He went out on his own, and is the owner of this shop. Great! I picked up my engine from the mechanics shop, loaded it into my pickup, and dropped it off for James to work on. We decided to not do a rebuild, with keeping old parts that were still good, but do a re-manufacture with all new parts. The only old parts were the block, the head, and the crank...only because it wasn't available brand new. My engine will be essentially brand new after he finishes!!! It didn't take long at all and I was over picking up my new engine! I dropped it off at my mechanic, and waited for him to get to it. Not getting into all of that wait - Phew! He finally got it done but the mechanic I had chosen, couldn't get it timed right, and wasn't patient enough to work through it! I would barely run...and I certainly couldn't drive it as it was. I was outta there. This mechanic had no affiliation with James at Independent Cylinder Head. Since he had been so helpful and kind, I called James and asked his opinion on what to do. He said he had a mechanic buddy, that he used to work with for a long time, that had his own shop. He'd call him for me and see if he could do my timing/tune up. He called back soon, and I was in to his buddies shop in 2 weeks! He had a couple of jobs ahead of me. I had my car towed to his shop. The day after I dropped it off to the new mechanic, two hours into the day, he called and said my car was all fixed and was running great and I could pick it up! WOW! James came through for me again! What a quick and good mechanic friend he had. I went to pick up my car in Milwaukie, OR and drove it home to Beaverton, OR without an issue! I was doing 60mph on Hwy 217, with my little 6 cylinder 235cu.in. without effort! It was purring like a kitten! Just like I wanted!!!! :) Little did I know, the mechanic called his friend James, after finishing my car, and told him how it was doing. Then, a day later, James called me to make sure everything had gone well with his recommended mechanic friend! That was a surprise! ... What a nice man James is to care so much about his customers to call and find out how satisfied I was with his recommended mechanic friend. I told him I was super happy with the mechanic, the speed he fixed it in, and the low cost, and how happy I was to hear from him (James). I don't care if you've called 50 machine shops across the country and found one you figure you'll use. STOP! Call James, and TAKE YOUR ENGINE TO HIM! We just don't get this type of incredible service that James supplies anymore! I would think I was back in the 1960's and he was right down my street and gave me the neighborhood friendly service or something! I highly suggest this very nice and dependable machine shop owned by James. I'm gonna be 69 years old in 2 months, and I'm telling ya, we just don't get this lucky very often anymore to find this exemplary service from shops! If anything, we hear about how so & so shop charged so much and didn't do a good job after paying that much! Not so with James! He takes me back to when incredible service was THE MOST IMPORTANT THING in doing a job for a customer. James is a one of a kind GEM!

From the owner: Additional hours available by appointment! Proud to be Portland's newest* automotive machine shop…read morespecializing in cylinder head reconditioning/rebuilding automotive/marine/farm equipment and more. Competition/Performance & Custom/Classic Cars - all welcome! Additional services include: - Cylinder Head Surfacing while you wait - Crankshaft Balancing - Rod Resizing - Cylinder Boring - Engine Block Deck Resurfacing - Flywheel Resurfacing - Brake Drum & Rotor Resurfacing *AERA Member *ASE Certified Master Machinist *30+ years of experience

Had trouble getting a fab shop to bend some stainless steel for me. Very small job, probably the…read moresmallest billing that a shop would ever have. But Kevin at Pacific Machine did the job for a reasonable price and had it ready the very next day. Can't ask for better than that. Highly recommend.

Kevin at Pacific Machine & Development helped me out with a project I was working on. Great…read moreservice. Thank you

I have been taking cylinder heads and manifolds here shortly after they opened and they have never…read morelet me down. The price is always reasonable and always on schedule. I once sent a friend there and said if they can't take care of you, they will send you to someone who can. Which is exactly what they did. Thank you Dusty's.

So I had heard good things about this shop , I came in and met the owner , asked to have a fly…read morewheel resurfaced he quoted me 35$ over the phone , then I confirmed it face to face , he said 35 $ it was a small simple Honda flywheel with no bad grooves , I said check , cash , or debit card ? He said cash is best so I said I will have to hit an atm , I came back 2 hours later and he said actually this one is 40$ with is bs , and the only reason he upped the price was because he knew I would have 2 20's from the atm , so buyer be ware , just buy a new fly wheel from cost less auto for 50 $ and save the bs for someone else , they are crooked and they do crooked business , by the way irs , might want to look into their business because I am sure cash jobs are best because they are tax free.

Archie & staff have been providing my clients with great engines for…read more three decades running. Never disappoints.