I brought Justin my custom-built Bushmaster AR platform. I asked him to remove the Krieger match…read morebarrel and thread the muzzle so I could use the barrel on a varmint rifle build. Little did I know, the person who built the rifle 25 years ago, made it nearly impossible for anyone to accomplish that task. With considerable effort and patience, Justin persevered. He was able to remove the barrel and complete the job. He did an amazing job and has earned my future business. Thanks again Justin!

Once again, Justin did an AMAZING job! My old Colt 1911 needed a makeover and Justin didn't…read moredisappoint! Concrete gray w/ black accents is what that gun needed.

Jim worked on my muzzleloader. I added a tang peep and new front sight to extend my effective…read morerange. Jim took some measurements of my old sights and adjusted the new sight to get me close. Well, close was a near bullseye on the first shot; only some fine adjustment was needed. Jim took extra care to mount it correctly with a shim that made it very secure. He called me before proceeding on a small mounting issue he found. Very professional service. On a side note, the new sight helped me harvest a very nice mule deer this season. I would highly recommend Elite Rifle Works.

Elite is a small customizing/modification shop specializing in bolt action rifles. It is operated…read moreout of s shop attached to their house. Jim and Ray Combes are the gunsmiths. I wanted a WWI Mauser barrel shortened to produce a more modern Scout rifle with a muzzle break. But after considering the rifle's setup and their lath requirements, we decided that I would be better off using another Mauser for my goal. Their shop looks like a place I would love to go thru and see what treasurers are hiding there. At first glance, it looks sort of discombobulatedly organized.. But after glancing around, I can see the method to their organization. In fact, I was looking for an old set of scope rings for an old .22 rifle sold back then by Sears (they don't sell guns anymore). Jim went thru his stash and found one that would work after looking at a half dozen or more. He also told me how to repair a slight split in the stock. Lots of good advice along with the old set of scope rings. Elite also works on other guns besides bolt actions. Also has a stash of old knives and I don't know what else. I will use them again if I have need for their expertise. Nice guys and knowledgable.

These guys were great. They de- Californiaed my ar 15. Took get them 10 minutes and didn't charge…read moreme. It was my second trip there. I can't recommend them enough.

Great place, shop is impressive, prices seem fair, communication great... 5 stars give them a try!read more

I brought a Rem Model 8 rifle to BGW that had been gifted to me, which had been taken apart and not…read morere-assembled correctly. I was quoted their minimum price for them to clean it up and put it back together. They promptly completed the work at a very busy time of the year and charged me LESS than the original quote! I would recommend Matthew and the BGW Team for all of your gunsmithing needs. They were Great!

Closed during website and Google normal business hours. Drove an hour to this store for them to…read morehave a sign in the door that shows they are closed for many days.

This business is amazing. I researched air rifles for two weeks on the Internet, and made a rough…read moredecision. I found this shop/indoor range. The staff is very knowledgeable, and willing to help. They let me shoot several air rifles, and I bought an FX Panthera air rifle and gear. It has been an interesting learning process since I bought the rifle in mid-April. They have bent over backwards to teach me the ins and outs. I would never go anywhere else for product information and service. Thanks Joe and staff, Richard Kayser

From the owner: We are Idaho’s only indoor air rifle range. We offer a full line of PCP airguns, optics &…read moreaccessories. SCBA tank filling and air gun repair / rebuild.

I went to buy 410 shotgun shells and they were in stock Good…read moreprice too Suggested where to get clay pigeons In and out in minutes

Was in there the other day after a breakfast date with a gentleman. We had never been in this…read morestore, so I said let's walk over and take a peek. We walked in and I started scanning the cases to see what they had. I wasn't asked, can I help you ma'am, not even a look my way. The man I was with was immediately asked if he'd like to see something? They couldn't pull guns fast enough out to show him. Now mind you, this man doesn't own a gun. Me on the other had am quite different, yes I own, yes, I carry, Ive been shooting on leagues for years, and was the one that was looking to buy. Needless to say....won't be back....ever!

I just left Mid Star arms for the last time. I felt so disrespected. I won a 9 mm carbine there in…read morea raffle while back and I've never shot it because I have several already. I went in to see if I could simply trade it in towards something that I wanted. I would've gladly taken almost any offer and made up the balance on a new gun. The store was completely empty, and a young man walked out and said "can I help you" and proceeded to walk over to a computer and start typing at it and I asked him are you in the middle of something, are you helping me? It was so awkward...I said, I'd like to trade in a new unfired gun that I won here in a raffle and put it towards purchasing something here that I'd actually like to own. He told me "that gun was most likely donated by our vendor and we have no interest in buying it back". I said to him so that's it. We're done here? He responded back "yes". I said "would you like to check with the owner before you just dismiss me? "He said "I'm the manager and I make the decisions" His tone was so dismissive and I felt so disrespected. Given that it was a holiday week and a Friday and the store was completely empty and the selection of guns was so sparse. I can't help but think that MidStar arms isn't doing that great. I worked in Customer Service for almost 4 decades, and this manager was very dismissive and disrespectful. I completely realize it's my decision to no longer give them any of my business because there are just way too many local gun shops that treat their customers with more respect. Definitely not a strong move to make your customers feel so unimportant. I personally will make sure to tell all my friends to please bring their business elsewhere.

Nice staff inside and a good experience. They had a special LGB event today and I gave my email to…read moreget special alerts and discounts and got a LGB t shirt for free!

I asked MCM Firearms to Cerakote my Walther .380 ACP. The hardest part about the process was…read morechoosing a color. After a few weeks, I received a call that it was done. I was extremely impressed with the attention to detail, cleanliness and crisp color. I highly recommend the Polar Blue, it really makes a gun standout without looking obscene. Their customer service was great, which is very hard to come by these days. Thank you MCM Firearms, I will be returning soon.

Went there and was looking for magazines for my MC9 Prime. Talked to Joff about it for a while and…read morehe was very helpful and resourceful. Super nice guy and very friendly staff. Allowed me to bring the magazine back free of charge if it didn't fit. Not many places allow you to do things like that. Will be back to buy more guns and gun accessories in the future.

Great shop. Staff and owner are always friendly and knowledgeable. No gatekeeping or looking down…read moreon new shooters. Nice selection and always great prices on firearms and accessories almost always the least expensive even when compared to big box online retailers

Three weeks ago I purchased a Volquartsen barrel for for my Ruger 10/22. During the purchase of…read morethe barrel I found every staff member in HawkTech to be extremely courteous, very helpful and knowledgeable. Since I was installing the barrel myself, the gunsmith gave me several suggestions which I am glad I followed. I stopped by HawkTech again today, and again found the staff to be very attentive and friendly. I guess I had missed the Ruger 10/22 corner of the store on my first visit but this time my attention was draw to the collection of Ruger based rifles and noticed that the prices were very fair and low. So low that I will be buying another Ruger 10/22 for my wife and it will be purchased at HawkTech. Then I noticed all the parts and accessories that were on display. I had to use great restraint and control for I can predict that HawkTech will become a regular hangout for me.

Called about having them doing armorer work and was told "come in immediately and we can help", 20…read moreminutes later I'm at the counter and wasn't even acknowledged. In the time spent at the counter and looking at the products in sight, their prices were higher than other businesses.