Dylan was on time to check out my fence. I was so nervous about having to replace the entire panel…read morebut after he looked at the damage he quickly assured me that would not be the case. Phew! He was able to weld the broken picket back & it looks great! The cost was reasonable as well considering what it would have cost to replace the entire panel.

After 30 years of use on our old mobile smoker, I decided to have a nearby welder repair and spiff…read moreit up. We both thought it would be best to start with a fresh surface, so I found Luke and his company via Yelp. Great find! He showed up promptly as promised, and worked diligently for three hours blasting the old pit. He gave me a high estimate and low estimate, and the low estimate prevailed when the job was completed. The welder and I both marveled and how nice the raw metal looked without out the rust, pitting and peeling paint. Now he has it in his shop to begin renewing the pit. I've had experience both sand blasting and glass beading and marveled at the equipment, and media, Luke used. Former US Marine Luke, trained by our favorite uncle, definitely knew his stuff. Pit is now at welder's shop for more work, and it's great to know that one of my kids will enjoy this pit for another 30 years. If you want the blasting job done right, in good time, the first time do NOT hesitate to give Luke a shot.

Might be the best customer service I've ever experienced. They came and picked up my old Blackstone…read moretop in the morning, resurfaced it and had it back by noon. Absolutely amazing.

Great people. Extremely accommodating to my small project and short turnaround. Did 1st rate work…read moreand were very competitively priced. I recommend them unconditionally.

Rudy did a great job. I was planning on getting it back and sanding and painting the part but when…read moreI picked it up it was already done. Awesome job.

The service was excellent. Laura at the front desk helped me figure out exactly what I wanted. Jake…read morewas also really nice and helpful. I really appreciated their services.

I walked in yesterday with a pretty simple need to have some modifications done to a table footing…read more Jake knew exactly what i wanted with minimal explanation, was quick, friendly and took care of me on the spot. Overall it was a great experience.

I can not speak highly enough about Jason and Reid, and my experience with them. A contractor I…read morehired, had hired a welder to do my guest house stairs. Long story short, 3 months later they still weren't done. I happened to walk my dog one afternoon and ran into RCR Squared doing some welding work for our HOA neighborhood mailboxes. I asked Reid if he would come give me an opinion on something that didn't make sense to me but I'm not a welder so what would I know. Reid was gracious enough to come take a look while his team continued working on the mailboxes. When Reid saw the stairs he was in shock and could not believe what he was seeing. He then filmed a 10 minute video pointing out all the things that were done incorrectly, not to code and that were extremely dangerous for me to send to my contractor. I had been waiting 3 months for these stairs and desperately needed to be able to get into the guest house, as we were going to be up there during the construction on my main house that was starting in 2 weeks (thank god I have a different contractor for my main house). Reid & Jason gave me a bid to demo and rebuild the stairs and said they could do it right away and get it done quickly. I told them as much as i wanted to hire them I was having another welder come look, just to get another opinion and would get back to them. A welder my main contractor knows and trusted and he confirmed everything Jason and Reid had told me but couldn't do the job for 3 months and that wasn't an option. So I called them back and hired them. Honestly, I think Reid and Jason took pity on me and squeezed in my project. They started the following Monday. They thought they could get the basic stairs built in 3 days (with no trim or paint) so we could get up there before July 4th holiday, but because they had to redo the lower section of the stairs that they originally thought they could keep, it didn't get done till the following week. They took off for the holiday weekend and were back early Tuesday morning. At the time the temperature drastically changed and got ridiculously hot and of course the stairs were in full sun. It was brutal but they came in everyday with a smile. The whole team was very friendly and hard working. By Friday they had the stairs done and primed so we were able to move stuff uptairs that we desperately need out of the main house over the weekend and they came back on Monday to finish the painting. RCR square was truly a godsend to me. If I hadn't have run into them that day, and Reid didn't take a few minutes to look at the stairs I would NEVER have known until someone got hurt, which could have been years down the line, just how dangerous these stairs were. The weight of the stairs also could have taken down my storage shed and garage because the proper supports were not put inside the wall when they redid the storage shed and landing. What a nightmare that could have been. The main things I want you to know from my experience with them are that they have a very experienced team, they show up when they say they will, and work as hard as they can to get your job completed on time. They can't control holidays and weather but they will work as hard as they can to get your job done correctly. They literally got my stairs done exactly when I needed them done. I would have been royally screwed without them. Can't not speak more highly of all of these men! Thank you Jason, Reid and all the guys. You all saved me and are truly the BEST!!! Would absolutely hire them again. And am happy to be a referral for them. Heather

I had a factory weld break on my Pontoon which caused it to take on water. I call RCR Squared and…read morewithin the first few rings I had a answer. The crew came to my house to do the repair. The owner was very friendly as well as his helper. They showed up on time and went right to work. Quick and efficient. They even helped me out a few minor fixes without complaint or up charges. Amazing welds done on Aluminum.

I have had these guys out a couple times now with excellent results. It was hard to find a fencing…read morecompany willing to take on a small repair job, but Forever Fence was up for it and even was able to get out to my house with a day or two both times. They did a nice job with some welding work to rehang an ornamental iron gate for me. I called them again a couple weeks later to move the latch hardware on that same gate to allow the gate to swing the opposite direction to provide more clearance to get a mower into my back yard. Overall, great service, work, and response time.

I had these guys make some custom parts for an aircraft tug, and they knocked it out of the park. I…read morewasn't sure if I'd be able to use the tug again, as the parts are so specialized. But these guys made it happen.

I design and build analytical testing laboratories through the US so know quality fabrication and…read morewelding work. I brought a project to Astro Mechanics and was very impressed with their service and work. Jeff worked through the design with me, sent me drawings, made some changes, and then built it. The welding was top notch, choice of materials (thickness of wall, etc.) was spot on, and everything was perfectly straight. Nothing but good to say. Use them.

Dan has fixed many things for me from broken kitchen cabinets, leaky toilets, loose faucets, ans…read morebroken yard gates. All repairs have been solid and at a fair price.

Dan did a great job from start to finish. We had to find a part and he meticulously worked from…read morestart to finish to find it. Great work Dan.