Never show up and never respond after making the appointment sounded good on the phone but never…read moreshows up

I noticed one of my exterior French doors was sagging from a top hinge. I saw a crack running down…read morethe frame where the hinge was attached. I thought the doors were going to be trashed. Isaac was quick to respond to my call. Came over the next day and took a look at the issue. Luckily it was something else but Isaac still took the time to help me repair it for a fraction of what he estimated. The door works great now. He's honest, communicative, works clean and fast.

I'm sure they are great. I wouldn't know because Yelp doesn't do well with connecting projects to…read morebusinesses. I specifically needed an automotive machine shop but was connected with many businesses that aren't that.

Did a great job on a small weld that I needed. Quick…read moreresponse, reasonable price and quality work Would definitely use them again I hope I don't have to though

Huge thanks to Haik for trimming my grill grates to fit my BBQ perfectly! He knew exactly what I…read morewanted, and the result was flawless just how it should've come from the factory. I highly recommend him to anyone needing metal or aluminum work. He's truly an expert in his craft, plus a super friendly and humble guy. Top-notch service!

Hike was very helpful and quick. All I needed was an angle cut on a couple of solid steel counter…read moresupports. It was done so fast.

Vic displayed a professional attitude and installed an iron gate with a privacy screen and lock in…read morejust about 2 weeks. His pricing was well below the other 2 bids I obtained. I highly recommend this young man with a pleasant disposition and humbleness.

We had used Victor for a few projects and he appeared to do good work. He installed a guardrail…read morethat unfortunately started rusting and paint peeling off - very low quality. It is very unfortunate that he stopped responding to us and we had to bring someone else to finish our project. A little communication goes a long ways. Will not use him ever again.

Aldrin with Union Brothers Welding did a great job repairing an iron fence at my mom's house. They…read moreare very professional, the quality of the work is amazing, and they offer great competitive pricing. I will be calling them again when more work is needed. My moms home needs a lot of work so the pictures are before the fence was painted.

Aldrin and brother Juan came to fix my gate because the door hinges felt off. My gate was fix in a…read moretimely manner very professional. Great quality of job and reasonable price!!! Union Brothers are friendly and get the job done Immediately. Please don't look further this is the place you need to call. You won't regret it.

AWESOME WELDING…read more Fixed our sad very old gate quickly. It's stronger and better than ever. Our home was built in 1930, so we are glad to have t working perfectly. This place does good, solid work, and they are friendly. Deeply appreciated the stellar welding!

Joe was great! My apartment had a wrought iron handrail that rusted and broke apart at the base…read more Joe came out and gave me a very reasonable estimate. He was easy to communicate with, timely and did a wonderful job repairing both handrails for my apartment complex.

the pipe is amazing for the mini bikes they port polish heads they do a lot id say it's a very nice…read moreshop

Got my Honda Cbr1000 block welded that was cracked .. saved me from having to replace a whole…read moreengine.. thanks

Since my last review of smaller projects/repairs (experience was good), I've brought them more…read morebusiness, thousands dollars' worth of business. Everything is good when they are TAKING your money and business. But, once it goes the opposite way (refund), Roger gets NASTY -- I didn't see this side of him before, always with a smile because while taking money in. I brought some parts to be replicated; 1" shaft with the center with a 2" diameter cylinder with 1" flanged bearings. I was suggested another way to "make" the part that would make everything more "simplified" for me, okay, sure. I wasn't sure what he meant, but after minutes of trying to explain to me, I just went with whatever Roger suggested since he would know better about the mechanics of machine parts, etc., He just told me that I would have to source the bearings myself, which is what I did. He asked me if the diameter could be smaller and I said yes. So I trusted his word and went with it. When I picked up the item, he said, "If it doesn't work out, just bring it back". The thing is, I complained after because what he sold me for almost $400, was NOT SOMETHING HE "MADE". It was a part that could be bought online (~16", 1" shaft with 2 shaft collars), which can be found on Amazon for $35 (shaft) + $10 (2 collars). He then said that he bought it McMasterCarr, then quickly changed his wording to "WE MADE IT". So which is it? (I will never know, but my assumption is he got it at McMasterCarr, as he first stated, or another retailer). Then he said, "I'M NOT HERE TO SAVE YOU MONEY." JUST WOW!! It's my fault for not understanding what he was trying to sell me, but it's obvious my lack of knowledge was taken advantage of--I let Roger do what he does. I believe there is a big difference between MAKING something and up charging for labor, etc., vs. buying $40 dollars worth of parts and CHARGING 9X-10X more!! Especially, to someone (me) whom he kept calling "friend" after all the visits/business I gave him. When he did this "work", I also dropped off a small part that had a broken screw stuck in it. He said it was FREE OF CHARGE to extract it. Anyway, when he agreed to refund me for the $400 (16" piece of 1" shaft), BUT he charged me $85 for the screw extraction that he told me that was free! From ~$400 refund, I received $85 less. This costs him nothing (almost literally) to fix easily. $85 FOR A SCREW EXTRACTION--HIGHWAY ROBBERY!!!! He gave it back to me, with a new screw, "I also gave you a screw". (Oh, gee, Thanks, I guess.)--But I didn't need that screw as I have 100's (if not 1000's) of these screws for my parts -- so he acted like giving me this screw in place of the broken one is a huge hook up, after I spent thousands and thousands of dollars here. I paid for this with my personal credit card, but he made out the refund check to the company I work for. So I asked him if he could cut the check out in my name since I'm the one who paid for it. He said, "just give it to your company and have them pay you." I explained to him that I can't do that because of accounting issues, etc. He got mad and he snatched the check out of my hand with an attitude. This right was the last straw. I was still going to give him more business (which I even told him, thanks for the refund and making this right, I'll be back). He told me, "I DONT CARE ABOUT MAKING THINGS RIGHT AND WHAT YOU THINK, I DONT NEED TO RESTORE FAITH IN YOU OR YOUR COMPANY". Okay, fine. ^Great attitude, perfect way to lose business after the fact that I stated that I hope this one issue won't affect future business and that I would be bringing more business. Roger shouldn't be interacting with customers on the front line if that's his attitude and represents your company. On the other hand, Alex is very polite. While Roger was deflecting the situation, blaming it on me, arguing who said what, this and that. Alex is the one who apologized on behalf of C&H Metal with a smile on his face, while Roger was steaming mad at the situation -- just the way he snatched the check out of my hand says it all. ALEX IS THE REAL MVP at C&H Metal, too bad he's not at top management, because management up top is clearly lacking customer service skills and lacking know-how to keep the customer acquisition costs low. I can bet they'll see this review and Google what CAC is because they don't know. Or maybe, they are making so much money, they don't care how they lose a few customers the way they do. Roger (mgmt) just knows how to take money with a smile on their face until you complain about something, then it gets nasty. This is the type of business you don't want to give business to. If you do give business to them, good luck. Hopefully, it's a short stint because eventually an issue will arise, and Roger has a short fuse, and you may not like the way he handles it. This experience was a blessing in disguise because I found a better and CHEAPER shop to do work for me.

From start to finish, their communication and service were top notch. I've been trying to find…read moresomeone to help with a fabrication for a kitchen hood vent, and finally, found the right company to do it! I would strongly recommend using C & H for your any of your fabrication needs. Great job!