Awesome selection, great guidance, flexibility, communication, speed and results. Dru, Geovanny +…read morethe crew were the best to work with on our now second project together. I still can't believe how quickly they get projects done + with such skill. Both of my projects had particulars, mitered waterfall edge, huge backsplashes and tricky angles with transitions and literally the execution was flawless. I've raved about both projects and love to hear from others they've had the same positive experience. Great work and great people.

Having to remodel a kitchen and counter top is an adult fantasy and dream you want to come true…read moreafter working so hard to save the money for. When Dru had said yes to the job and how fast they can have it done should've been a Huge Red Flag Why aren't they busy like everyone else.She came back with a price for us and can get it done in less then a week. I was told they would buy two slabs for the job and not to worry about anything it's her job to worry.We came right over to see the slab and see how the lay out would be.We left it up to Giovanni to organize the layout and he even said it would be tight as they only purchased one slab.Never seen them use a leveler to double check their shims and they cut out faucets holes after they installed cutting the holes dry as it began to smoke they poured a cold bottle water over holes to cut hot and cold doesn't seem to make sense to me and would think it could crack. Right then I should've said no to the job but kept being reassured that they know what their doing and let them finish. I've asked about the scratches on surface and marks around the edges and was told it was from the Machine that cuts granite and all would be polished out. Just let him do his job I'm told. I noticed one slab was not cut even and left a gap from the wall.He began to add colored putty to edge that is seen walking into the kitchen and was told well just add tile and you wouldn't see it. Well maybe make your cuts straight instead.So now after all the money I'm spending I have to add a tile job too that wasn't our plan. They even had the balls to bring in a super short piece for a smaller top of an end cabinet that goes next to stove and when I showed the guys they shrugged their shoulders and said they don't speak/understand English. Why even bring this piece into my home if it's nowhere close to fitting? Giovanni says he can glue a piece together to make it fit as they don't have any more of the slab left over. Again I should've said take all the pieces out of my home as I'm already not happy with the job.But was told not to worry they would fix and make all right. I spoke with Dru about all my concerns and she said it's not about the money and she will make sure the job is done correct and I'm happy with the final results.So I'm out looking for tile now and see not only do I need tile I need thick tile as the gap is so thick the tile would slip right through. When I say this to them I'm told by the time I add the tile mud I won't see gap. And would give me a discount towards having to get tile as money isn't in issue it's about my happiness in the job. No money discount amount was said at the time but I did say it's costing over $900 just for the tile and not adding material and contractor.Weeks for by as they ended up having Covid.Giovanni comes back out to take measurements for the small new piece replacement.( as they never made a template the first time around )I bring up my concerns of the cutting marks and unpolished look of edges and scratches.He uses a Black Magic Marker for some of the small scratches and says the next time he will work on the edges. He worked on a small hole that was next to a seam ( that looked like it got broken off ) and said once the tile is up you won't see the gap between the granite and wall. But why was it cut short - crooked on this one piece the other pieces are straight and somewhat tight? Again shoulder shrugged and said they will make right. And in all this time I had the counter tops covered over the sink and everywhere else as I feel like the work is still in process and don't want to be blamed that I did something wrong to the counter tops. So a new slab was purchased and I was told it cost them $3000 for it Well maybe you should have purchased two the first time around and the guys would've felt more comfortable cutting slabs and wouldn't have made mistakes. So Giovanni and Dru come out after work to add the small section of countertop unprepared doesn't even bring sealant to glue top down. They do however brings other stuff to work on edges and scratches I point out scratches on new piece and he begins to color it in with marker ‍‍‍ Well just stop and don't do that to the large scratches. They seems to be in a rush to leave and collect rest of money. So they leave the "black stuff " for me to deal with the edges myself. I asked well remember you said a discount for me having to purchase tile Dru agrees and says how about half so I only received a $500 discount! I really think it should've been more as I didn't make all the mistakes and sometimes a business has to take a loss. This job has been in the works for over month now and I now noticed three cracks around the sink one where the faucet goes ( cold water was poured ) and the around the sink edge / corners I send a message and it take four hours to get a response of "it's a natural stone and cracks are common" I had to write a short review

I came back for a similar project to the one before, and not only did he charge me half as much but…read moreit was done quicker! He still is just as friendly as ever, though his hours make getting here sometimes a challenge. But anytime I have a welding job I will only go here.

Very nice people always get me in quickly an do an exceptional job on both of my carsread more

I have no experience with moving heavy stuff like chicken coops, but when my wife decided that "we"…read morewere raising guinea fowls, a chicken coop weighing 600+lbs landed on our driveway, a couple of hundred feet from where it needed to be. The people at Casale were great when we explained the situation and recommended renting a Toro Dingo. It arrived as promised, except that the coop ended up raising the Toro off its tracks for some reason. When I called Casale, Matt Dotson, their manager listened to me and decided to swap the Toro with a beefier Cat. It came within a couple of hours and they only charged me the difference (~$70). Matt walked me through the new machine over the phone and the coop was in place a little later. Great guys!!!

Kris was very helpful, great service, great people. Great inventory to pick from, I always go to…read morethem for rentals.

We've been loyal customers of All Seasons Equipment for many years and wouldn't buy equipment…read moreanywhere else. Recently, a semi-commercial purchase didn't work out as planned, but Duane and his team went above and beyond to make it right. Their top priority was our safety and satisfaction, and they refused any payment for the inconvenience. Truly outstanding service! That kind of old fashioned, honorable and professional service is hard to find today but at All Seasons, it is the way they do business. Thanks again to Duane and his staff. James & Hannah Pavoldi 319 Vernon Drive. Duanesburg, NY 12056 Jpav777@gmail/com 518-545-1931

Tony is always very helpful he knows parts forwards and backwards and dwayne has made me some…read moreawesome deals over the years thanks guys

I had the best service here, these boys know exactly how to treat a lady in need. They had all the…read moreparts and they were super kind, my husband was impressed.

Came in because I was desperately in need of some jumper cables to secure some cargo in my truck &…read morestopped by their gardening area.... The jalapeño plants were BEAUTIFUL. Still in the 4" pots, these babies had sent out peppers all over the place! I am now home and kinda regretting not buying one... But I did buy 16 tomato plants... all for 1$ a piece and I just finished planting then out in my garden. They are beautiful and I think I might just make a special trip back up to this place .... Just the quality !!! It was incredible!! I come from a small town and we had a little garden mart and there is nothing like this where I currently live! Thank you :)

I brought my craftsman t-110 in to get repaired. Billy the son of the owner was very helpful. He…read morewas honest and that goes far with myself. my rider was really not worth fixing. could have been but I decided to just buy a new rider. Billy sold me a very nice Husky for a great price. They also didn't charge me full price for the work Billy already put into it. They whole group ( family I believe ) were very friendly. We had a few laughs and I would highly recommend them over others in the area. See for yourself! The friendliness and honesty itself is worth it. But their price was actually cheaper too. I got a much better mower with a bigger motor and a v-twin for only a couple hundred dollars over a new craftsman that didn't have a hydrostatic set up And was $2300. It was a no brainer to buy the Husky from Weisheit!! And you cannot get better service, Really. Even delivered same day after Billy took out of the crate and assembled what was needed. Try them people. You will NOT regret Rich

After doing extensive research on zero-turn mowers, I discovered Weisheit Engine Works only 22…read moreminutes from home. Upon arrival at their 8am opening time, I was greeted by Billy, who was very knowledgable and explained all their great models (Ariens, Gravely, etc). By noon, I made my decision on a Gravely, got a quote and it was prepped and delivered by 5:30 PM!! Additionally, they took away my older Cub Cadet mower for evaluation and possible purchase. Great service. Billy and Chris are professional, competent and responded quickly to all my questions. I'm very pleased, and look forward to a long relationship.

These guys are top of the line. Very knowledgeable and always friendly and ready to help. I could…read morenot recommend them enough.

Had these guys shorten and re-balance a drive shaft for me. They did a good job on the drive shaft…read more 4 Stars only cause it was a tad on the expensive side. Super nice, cool shop, obviously very knowledgeable in V-8's and drive train applications. The rebuilt/build hi performance engines, have a 2WD dyno, etc. They also machine and do diesel engine stuff as well.

I had the absolute pleasure of meeting the owner, Chad here today. I accidentally vacuumed over my…read morediamond earring and spent hours trying to find it within my vacuum. To no avail I couldn't find it. In a panic, I called this store and Chad told me to come right over, he would help me any way he could. Within minutes, Chad found my diamond earring and was so helpful!! He refused to charge me for his time and was genuinely happy that he was able to find it. My deepest gratitude to Chad for his help and kindness!! A wonderful business man and truly kind person. Please send any business his way, he is beyond deserving!!! Thank you again for your help!!! Maria

Super selection of new vacuums and expert repairs on virtually every type of vacuum. Friendly snd…read moreknowledgeable service too.