Service was on time and professional. Exactly what I wanted and for a great price!…read more I needed a metal fence piece welded back that had been pried open by a would-be intruder. And most importantly a more reliable lock for my rear gate that couldn't be so easily encouraged open.

I hire Pedro Marquez and first of all he completed the job about a month later then he promised and…read morewhen he finally finished i noticed that he used a cheaper and thinner metal then that he promised, and the worst part is the painting job, is paint everywhere including the new concrete steps.

I recently purchased an HKS muffler and I have a different exhaust tip I wanted to put on. This…read morewould require cutting and welding. After looking around I decided to call C&H, originally Ronnie picked up on Monday morning and mentioned that all the welders were out on job sites and to call back Wednesday morning. When I called in Wednesday morning Roger picked up and after I briefly explained what I was looking for he said to visit the shop and bring the muffler and tip. Roger is very nice and professional along with everyone else at C&H. He told me that the muffler cut and weld would be done by the next morning and so I left my contact info and left. I get a call about 4 hours later saying that the work is done so I drove over and I am impressed with the work. The cut and welds are clean, no mess, no scratches, no dings, the new swapped tip is aligned perfectly. The guys at C&H also wrapped my muffler to protect the finish from any scratches or dings! Great service, great price, fast turn around time! (It is still Wednesday as I write this review) Overall I highly recommend C&H if you're looking for metal fabrication work! Talk to them if you have any questions and they'll help you out Thanks Roger and everyone at C&H!

Since my last review of smaller projects/repairs (experience was good), I've brought them more…read morebusiness, thousands dollars' worth of business. Everything is good when they are TAKING your money and business. But, once it goes the opposite way (refund), Roger gets NASTY -- I didn't see this side of him before, always with a smile because while taking money in. I brought some parts to be replicated; 1" shaft with the center with a 2" diameter cylinder with 1" flanged bearings. I was suggested another way to "make" the part that would make everything more "simplified" for me, okay, sure. I wasn't sure what he meant, but after minutes of trying to explain to me, I just went with whatever Roger suggested since he would know better about the mechanics of machine parts, etc., He just told me that I would have to source the bearings myself, which is what I did. He asked me if the diameter could be smaller and I said yes. So I trusted his word and went with it. When I picked up the item, he said, "If it doesn't work out, just bring it back". The thing is, I complained after because what he sold me for almost $400, was NOT SOMETHING HE "MADE". It was a part that could be bought online (~16", 1" shaft with 2 shaft collars), which can be found on Amazon for $35 (shaft) + $10 (2 collars). He then said that he bought it McMasterCarr, then quickly changed his wording to "WE MADE IT". So which is it? (I will never know, but my assumption is he got it at McMasterCarr, as he first stated, or another retailer). Then he said, "I'M NOT HERE TO SAVE YOU MONEY." JUST WOW!! It's my fault for not understanding what he was trying to sell me, but it's obvious my lack of knowledge was taken advantage of--I let Roger do what he does. I believe there is a big difference between MAKING something and up charging for labor, etc., vs. buying $40 dollars worth of parts and CHARGING 9X-10X more!! Especially, to someone (me) whom he kept calling "friend" after all the visits/business I gave him. When he did this "work", I also dropped off a small part that had a broken screw stuck in it. He said it was FREE OF CHARGE to extract it. Anyway, when he agreed to refund me for the $400 (16" piece of 1" shaft), BUT he charged me $85 for the screw extraction that he told me that was free! From ~$400 refund, I received $85 less. This costs him nothing (almost literally) to fix easily. $85 FOR A SCREW EXTRACTION--HIGHWAY ROBBERY!!!! He gave it back to me, with a new screw, "I also gave you a screw". (Oh, gee, Thanks, I guess.)--But I didn't need that screw as I have 100's (if not 1000's) of these screws for my parts -- so he acted like giving me this screw in place of the broken one is a huge hook up, after I spent thousands and thousands of dollars here. I paid for this with my personal credit card, but he made out the refund check to the company I work for. So I asked him if he could cut the check out in my name since I'm the one who paid for it. He said, "just give it to your company and have them pay you." I explained to him that I can't do that because of accounting issues, etc. He got mad and he snatched the check out of my hand with an attitude. This right was the last straw. I was still going to give him more business (which I even told him, thanks for the refund and making this right, I'll be back). He told me, "I DONT CARE ABOUT MAKING THINGS RIGHT AND WHAT YOU THINK, I DONT NEED TO RESTORE FAITH IN YOU OR YOUR COMPANY". Okay, fine. ^Great attitude, perfect way to lose business after the fact that I stated that I hope this one issue won't affect future business and that I would be bringing more business. Roger shouldn't be interacting with customers on the front line if that's his attitude and represents your company. On the other hand, Alex is very polite. While Roger was deflecting the situation, blaming it on me, arguing who said what, this and that. Alex is the one who apologized on behalf of C&H Metal with a smile on his face, while Roger was steaming mad at the situation -- just the way he snatched the check out of my hand says it all. ALEX IS THE REAL MVP at C&H Metal, too bad he's not at top management, because management up top is clearly lacking customer service skills and lacking know-how to keep the customer acquisition costs low. I can bet they'll see this review and Google what CAC is because they don't know. Or maybe, they are making so much money, they don't care how they lose a few customers the way they do. Roger (mgmt) just knows how to take money with a smile on their face until you complain about something, then it gets nasty. This is the type of business you don't want to give business to. If you do give business to them, good luck. Hopefully, it's a short stint because eventually an issue will arise, and Roger has a short fuse, and you may not like the way he handles it. This experience was a blessing in disguise because I found a better and CHEAPER shop to do work for me.

I'm a contractor and used The iron specialist for couple jobs now and they are amazing great…read moreservice. Vicente Morales is the best in the business. Will keep using them for my jobs. Looking forward to future business guys. Keep up the amazing work 10/10

I met Vicente and his father during the pandemic when break-ins started increasing and our HOA just…read moredidn't feel right calling the locksmith again. This is a father and son team that are hard-working and honest people. You don't see a lot of family owned businesses like this anymore. They are respectful of the property, efficient, and they do a damn good job. Since our HOA met them, we're up to now 3 projects because of the trust, honesty, and fair pricing. They've reinforced an aluminum door that couldn't be welded and every other company said couldn't be done but they managed to do it and we're here 3 years later with no issues. They also completely tore down and rebuilt and reinforced a back gate that was a huge project. Their pricing is fair and they work fast. I couldn't recommend them more.

This review is long overdue, I had FG metals fully remove…read moreand build a new front gate in my home. From the very beginning they were extremely professional and responsive to any questions I had. I even took the time to compare prices by getting multiple quotes and they always stood out the best. They were not the cheapest options but I could not put a price on the experience, knowledge and professionalism they offered. With that being said, their prices were extremely fair def. Not the highest quote I received either. The job was done within a week or so and possibly delayed due to some Rain we were having. It's now been a few months and everything is still Holding up great, we are extremely happy with the entire experience and would definitely recommend the father and son duo for any of your projects. Muchas gracias por todo!

I would not use them. After 2 years of doing the installation, my wrought iron railings are rusting…read moresignificantly. Despite charging me for it, they did not properly prime and seal the railings. When I called them back to repair it, they wanted to charge me another 33% of the original build/install price to remove, sandblast, and repaint the railings. The owner was pretty unresponsive, stubborn, and ultimately quite rude over text and phone. By the way, I noticed they only have 11 reviews. That's because they keep deleting their reviews and restarting their profile, probably because of their bad customer service and ratings.

I'm not sure where to begin, so I'll start at the beginning. We are grateful to Yelp reviewers for…read moretaking the time to assist others in finding a great company that works with metal.It led us here. Being the mom of a soon to be Eagle Scout who has a vision that includes two stainless steel metal boxes that need to be completed within the week, we needed to find the right person to do the job. Mark is exceptional. This wasn't the biggest job, but in the eyes of my son, it's the most important job on the planet. Mark made it his personal endeavor to be sure it was done right and on time. We had time constraints, as my son had planned on installing two hiker sign-in boxes on Saturday morning, with the city developer meeting him for approval. My heart sank when Mark let me know at closing time that he would not be able to finish before closing. I'm not sure if it was the sound of my disappointment or the choked up feeling I got, but he ended up agreeing to stay late until the boxes were finished, and could be picked up first thing on Saturday morning. This deserves far more than 5 stars, as the customer service at that point was superb. I had no idea what these boxes would look like, but based off a rough sketch that my son drew, Mark designed to amazing and sturdy boxes that will withstand all elements of weather. They are built with expertise, and are appealing to the eye. Our family has not enough words to thank Mark and his crew for taking a job which wasn't the most lucrative and turn it into a job equally as important as his high end deals. Thank you Mark for your superb service, and if you are ever in the area of Sierra Madre, you should check out the trailheads of Bailey Canyon and Mount Wilson Trail.... your boxes are anchored into the soil with pride. You have helped and Eagle fly.

Custom made a metal under mount for my stone sink and it fit perfectly. Very professional and…read moreresponsive! Great to work with .

This guy was my second choice however I'm assuming after whatever time he messaged me, he decided…read moreto not message me back either, but that's OK. I ended up doing the job myself. I am a welder, but our weed shop. The wires were stolen by some homeless people so we didn't have any power, but I forgot there was another welding machine under about an inch of dust that I was able to pull out and work with Anyway don't know this guy. Don't know if he's good or bad. Just know I left him a message and I was expecting a reply, especially because he said he was gonna be available in the afternoon but oh well.

We highly recommend Shane at HB Mobile Welding! He built a fully custom detailing rack for our…read moremobile detailing setup and listened to exactly what we were looking for. The work was high-quality, pricing was more than fair, and the turnaround was quick. Reliable, professional, and we'll definitely be using him again!

Great local shop with honest and passionate owners. Will be back for sure as I continue to require…read morecustom metal pieces and repairs.

They took my idea and brought it to life and the turn around time was great ... David and son are…read morethe best

Great and friendly staff. Price is reasonable too. The turn around took 2-3 days. I was amazed by…read moremy son's medal and how it turned out! They are also good with social media communication, my husband would inquire through text messages and emails and they were able to get back to him in a timely manner and answered every question he had.

AMAZING we had the best experience having a black kitchen pot rack turn to beautiful Nickel ! The…read moreservice was very friendly family run gave us in a timely manner I'm already taking off all my hardware in my new house everything Nicke.