Working with Victor was truly a pleasure. We were required to install new railings into a laundry…read moreroom and I only had 30 days to get it done. I tried to get in touch with some other companies who never bothered to get back to me. When I called Victor, he came out within 2 days and measured the area. He fabricated and installed the new railings within a week. They look beautiful! I highly recommend this company to anyone who needs wrought iron work and I will definitely use him again.

Great experience with Victor and his crew! I needed safety railing for my Mom's home and Victor had…read moregreat advice and installed railing in front, pull bar in back and safety bar in my Mom's bathroom. Victor is easy to work with and was courteous, professional and delivered on time. Will recommend without hesitation to friends and family. Appreciated his quick turnaround and getting my Mom back in her home safely!

I needed a small entry gate to my front yard (5' opening), I reached out to quite a few companies…read moreon yelp, a few responded back with outrageously expensive quotes. When I contacted Duncan welding, I received a response very quickly. Their answers were direct and addressed my needs and they were happy to answer my questions. They provided a reasonable, and affordable quote, and one that was close to the actual, final cost. The quality of the work completely blew me away, I am so impressed. The level of craftsmanship, attention to detail, and obvious passion for the craft really shines through in this gate. Everything is level, straight, and fits perfectly. Truly a master in his craft. As a person who prefers to give business to a local, family owned company, I would absolutely recommend David, and Kelsey of Duncan welding to anybody reading this and I will be a continued customer for any future fabricating needs. Thank you guys very much.

Duncan Welding was absolutely fantastic!!! When replacing our side metal gate, they delivered…read moreexactly what they promised on time and under budget. Thanks Duncan Welding!

We found Nate's attitude to be professional and the work to be absolutely wonderful. He came out…read moreand took our chairs, bar stools and patio recliners. They came back beautiful. He also recommended we not powder coat a Mallin patio set as he thought it would not adhere well. We admire his honesty and he did not charge for pick up or delivery. We highly recommend him.

Hired Swink Welding for rebar welding on a retaining wall that we are constructing in our backyard…read more Initially spoke to Nate and got a quote (great communication) and had the opportunity to meet Nate, Brian and his screw (great guys), knowledgeable and clean work by the plan. I highly recommended them for your construction and fabrication. Thank you Nate

DO NOT USE THIS COMPANY if you don't want to have to redo the work in under a year…read more I am revising my previous review (which I cannot find). I had given Emanuel a four or five-star rating as the fence was installed, and I was delighted. HOWEVER, in less than a year, it is rusting and in some places fully rusted. I have called and texted, and made appointments repeatedly with Emanuel, and he has either not shown up, cancelled, and never reached out to reschedule, or made excuses (e.g., his employees won't work, etc.). I now have to pay to have the fence recoated and painted - a couple of thousand dollars. I have a friend whom I referred, and she is having the same issues. However, he never even responds to her.

Did a great job for us appreciate it i'd recommend them…read more Goes above and beyond glad that I hired him to do the work

I agree with Luke's review- Chris is a sharp young guy and knows his stuff…read more I was referred to Chris by a friend who owns a dirt bike shop in Simi when my Polaris RZR tore an A arm mounting bracket off the frame, messing a lot of stuff up ( technical terms). 3 years later, I'm still using Killer Off Road because of the service. Even better, Chris moved from Moorpark to Simi to be closer for me-- well it worked out that way anyway. I recommend Killer Off Road highly.

Chris at Killer Off Road turned my tame RZR into a beast! Excellent attention to details and…read moretreated my utv as if it was his. I will NEVER take my ride any where else!

Needed some customizing to a roof rack mounted bracket for a 360° Awning, and searched locally…read more Found Brent's info., headed to the shop. We met, he planned and was very direct and upfront with ideas. Before the end of the week, these two brackets were completed and exceeded my expectations. The work was great, he and the staff were great and I will return for all welding needs! Thank you Brent!

Rocco helped me small job I think they don't mind how small…read morejob they take care of it their business. I'm really appreciate it Rocco and Brent .

I needed a steel framework built for a project at work. My usual shops had ridiculously high…read moreestimates. A friend recommended Slims and brought him a drawing. He estimated HALF of my lower quote. I whipped out my company credit card and he said to put it away until the job was done. He sent it out for paint after fabrication. Such a good job I had him do it again a few years later for a different project.

Tim is amazing. You will not find a better welder with the knowledge he has in the area. Prices are…read morevery reasonable. If it needs welding or fabricating he can do it.

Just finished repairing my wrought iron fence and gate. Totally outstanding work and communication…read more I highly recommend this company. Just my humble opinion.

Haas metal designs did an amazing job installing our new gate. The gate looks beautiful and opens…read moresmoothly every time. Really appreciate the craftsmanship and professionalism. Will for sure use again!

I needed a metal bracket fabricated to hold a fire extinguisher under the seat of my truck…read more These guys were able to make the bracket, mount the extinguisher, and weld it into place while I waited, and watched. I love shops like this. A bunch of hard working, honest guys who fix problems, without any nonsense. If you need metal fabrication, or metal repairs, like on a tractor or a truck, give these guys a call.

My go to guys for getting any type of steel or metal work done. From fabrication to welding to just…read morepicking up some steel from them, they have it all.

I visited AP recently to have a custom steel part fabricated for my motorcycle. They came highly…read morerecommended from a friend who works at a machine shop. The part I needed was a simple flat piece of mild steel with two bends, 6 holes and some deburring. I included a detailed 2-dimensional drawing and spoke with one of the technicians for about 20 minutes to confirm the details and make notes. He estimated this to be about 1-hour of work or less and that it would cost about $55-60. I informed the technician that I needed the part in less than a week, because I had to install it prior to a trip I was taking. He assured me it would only take a day or two. The following week I still hadn't received a call back from AP, so I called on Tuesday to ask about the status of my part? They said they hadn't gotten to it yet. I reminded them that this was a time-sensitive job. He said to come by to confirm everything with his boss, which I did. The boss raised the price to $85, which is on the high side for such a simple job, however it was still under my $100 budget, so I gave the "Okay". They also demanded a deposit before beginning work. Next they called on Thursday and let me know the part was ready to pick up that evening. I stopped by after work and there was still no part. In fact it hadn't even been started! After wasting time and gas, I once again emphasized that this had to be finished no later than Friday. The next day, on Friday, I finally received a call stating that the part was finished and ready to be picked up. I had a friend stop by after work and retrieve the part, however when I got home, there were some errors. Two holes were drilled far larger than the drawing called for and were in the wrong location. In addition, the sharp corners weren't radiused as specified and nothing was deburred, so it had sharp unfinished edges everywhere. After about an hour of additional work in my garage, I finished the part myself and after redrilling, I was able to make it work. However I wasn't pleased about the delays, the increased estimate, the unnecessary trip, and the poor quality of the finished part. If it weren't for the extremely courteous and apologetic technician I originally spoke with at AP, they would only deserve a one-star rating.