Used Amp Electric to install a new breaker box, upgraded from 100 to 200 amp service. This also…read moreinvolved moving the electric mast to meet current building codes. All of the electric service was top notch, the electrician I used for my kitchen remodel told me the work was fine. However, the new mast they installed was horribly installed. They installed the flashing ON TOP of the shingles above the mast, put two nails through it and the all the shingles, gobbed some tar on it and left it at that. I called Amp Electric and gave my complaint to whoever answered the phone. Was called back later saying that is they way they do it and it is fine. It took six shingles because we had to replace the ones that had nail holes through the surface. My cost was only $160 to repair because I already had the shingles. So a mixed review. Don't have them do anything except electric work.

BEWARE! The $49.95 furnace tuneup special appears to be somewhat of a bait&switch. Once in the door…read morethey find something wrong (which is fine) but then charge you an outrageous amount to "fix" it, more than making up for the low cost of inspection. After inspecting and showing me the two burners, the tech said they there was corrosion on them that should be removed and would cost over $200. I consented, assuming this would take a considerable amount of time. Five minutes after taking them to his truck for cleaning he was back and showed me the burners with only some of the corrosion removed. He said "that's the best I could do. THAT WILL BE $250". So for 5 minutes of work he was charging me $50@ minute. I demurred and ended up settling for $$150 for the corrosion removal, still way to much! His response " you're paying me for my expertise, not my time". I found my experience with them to be very disappointing! Again: BEWARE! The business responded below and falsely claimed I "dumped a can of diet coke in their technician's too bag". I DID NO SUCH THING AND WOULD NEVER DO SUCH A THING! I agree with the company's claim that I consented to the charge in advance but assumed the time required for the work would justify the charge. The cleaning of the burners took no more than 5 minutes! That meant they were still charging me $50 @ minute. Although I negotiated to a reduced charge of $150 for cleaning the burners, that was still $30@ minute! I stand by my original claim that this company engaged in a bit of "bait & switch"! And the claim that I took revenge on the technician by dumping a can of diet coke in his tool bag is outrageous and false and appears to be an attempt to discredit my negative review of this business!

Kortase, Based on my experience, I esteem this company…read morehighly in Integrity, honesty and very capable in workmanship and work ethics. What else can I say Ada Scott

To update on the issues we had with this company... We had our farm irrigation/sprinkler company…read moreout to start up our system and found that Martech destroyed a bunch of the PVC plumbing that feeds our irrigation. They hand dug a trench for electrical from the house generator and laid it along water piping! In the process they broke water pipes and never mentioned a word about but rather buried it and apparently assumed we would not notice.

From the owner: Martech Enterprise is an industry leading HVAC/Electrical company proudly servicing clients in the…read moreWest Michigan area for over 20 years with hard work and extensive knowledge. The licensed staff at martech Enterprise undergo continuous education and training to ensure that we are always current on the latest industry developments and products. The Electricians at Martech Enterprise are trained Journeyman and have education and certifications in safety and the latest industry technology to better provide for our clients.

This is a great company. Brian is a master electrician, and it shows. I had another company connect…read morethe electric for the pilot to a tankless hot water heater for me. After 3 attempts, it finally worked. I called B & L to diagnose why my electric bills were so high (unrelated to the hot water heater). Brian not only diagnosed the problem (a setting on my whole house generator), he also discovered the other company's "fix" was to disconnect my fire alarm and use that line for my hot water heater! Brian fixed that quickly, and my home was again safe. They are my "go-to" company for anything electrical.

From the owner: B&L Electric & Construction is a full-service contractor. We deliver a wide range of professional…read moreelectrical and construction services for residential and commercial clients.

The electrical work done for a service upgrade was very efficient and is competitively fair priced…read morefor the area. Great communication throughout the whole process, will recommend.

Labor was very pricey for the work they did. The quality of the materials used verses the price…read morewere also pricey.

We hired VanderHyde to put in a 30 amp 120v service to hook up the camper we live in. They came and…read moredid the install, but put in a 240v instead of the 120v. This mistake costed me over $1000 to fix. I was reimbursed the initial payment of the installation, but not the two converters and the repair man that I had to have fix it. They took over 5 days to get the electric hooked up right. We have been without the camper heater since the first install. They refuse to reimburse any further. I would never hire them again. The company's morals are not for me.

If you call Vander for a furnace problem, your very next call should be setting up a second opinion…read morewith a smaller, locally owned company- same day. In a high-pressure winter situation, make sure to take a step back and verify their findings. Do not take "whole furnace needs to be replaced" as the end-all after they look around for 10 minutes attempting to find a reason, not a fix. If they say the ignition is bad or the heat exchange is corroded beyond repair or leaking, ask them to show you. For $99 a visit, have them prove it. Don't get mixed up in the ramblings of "this is how a furnace works". Ask "What was the ohms reading for the igniter? Show me, please." "Where is a CLEAR photo of the heat exchanger corrosion and proof that it's not cosmetic wear? Please perform a combustion analysis to prove it's leaking CO." You CAN find another company to fix or replace that one part for $600 vs selling you an entire furnace +bringing this up to code +bringing that up to code +... Don't let them tell you otherwise. Trust your gut.

My wife and I are both lawyers. Because of Covid and a family health issue we have had to work a…read moreLOT from home. We asked Wolter's to provide us with a whole house backup power solution that would keep us online when storms knock out power. They have installed a Kohler RCA20 natural gas generator with internet connectivity...and it is perfect. But more important was the level of service--both technically and from the business office. We always understood what choices were being made, and the communication on delivery, installation and operations could not have been better. We cannot recommend them highly enough.

From the owner: Specializing in: - Electricians…read more- Generators - Electric Generators - Lighting Maintenance Service - Electric Contractors-Commercial & Industrial - Lighting Contractors - Generators-Electric-Service & Repair - Home Automation Systems - Electric Motors - Lighting Systems & Equipment - Electric Equipment Repair & Service - Electric Equipment & Supplies - Building Contractors