I had my wheels power coated Gloss black for about two years ago. The have held up great and still…read morelook new to day. Because the wheels where original manufactured equipment, I don't have concerns of a wheel collapsing. I recommend Finish Logic, Walt C,

"Hey! Are those Timberlands painted black?"…read more -Elaine Benes, Seinfeld da Scene: Found a set of 21" OEM wheels on ebay, which came off a wrecked vehicle; price was too good to pass up. Found several outfits to do painting or powder coating and best comms came from Finish Logic so went w/ them. Dropped off the wheels and had a new set of tires drop-shipped to them. I was anxious during the short wait... da Work: After getting a look at my wheels and stripping it down to bare metal, they noticed a dent and small crack on one of the wheels and gave me the options w/ clear info. They suggested sourcing another wheel and that they would wait on it or they could do a dent & crack repair and roll the dice that it balances. Should've listened to them; that wheel couldn't balance. When I went to get an alignment and re-balance the tires, they confirmed an issue with one wheel, showing a little wobble at 80mph. da Service: Great comms from start to finish, quick turn-around, and quality work. I'll be getting back with them to do a replacement rim for sure, wanna make sure it matches. Use these folks!!

I had Tim do my Railing on my deck ,the powder coating failed miserably,there is rust every where,…read moreI have asked when he will redo the powder coating I am still waiting for his response.

really terrible work and company to work with. I took a few motorcycle parts here for a custom…read morebike that I'm building. I had to have them do several parts 4 times before it was even usable. They used duct tape to "plug" the fork openings in the motorcycle tripple clamp. It just made a huge sticky mess for me to clean up but the tape had covered sections that should be exposed. Now that I'm installing the parts i've had multiple locations where in just regular assembly (no hammers or force) the finish is flaking off. I can then just keep picking it with my fingernail. I also found that they had dropped my swingarm at somepoint before they powedercoated becuase the hole that my bearing needs to go in was clearly smashed in. Good luck to me getting a swingarm bearing back in a hole that isn't round anomore. There were also several times they told me my parts were ready and to come get them only for me to show up and the shop was closed with no one there. I did get a response when I texted but only to say they had left to go to another job, even when I had confirmed with them what time I would be there. Really bummed that I paid almost $400 for what ended up to be nothing but a hassle and a waste of time.

I had a situation where someone scratched my wheel by accident so they had me contact Tyler at his…read moreshop to get it fixed. I called Tyler and realized how nice and professional he is he right away told me he'd take care of it, my wheel was painted with regular spray paint and even though that's not his expertise he said he'd figure it out so he got to it then later he called me and said the wheel was almost finished but him being and true expert and professional said he was not happy with the results because he likes to turn it really perfect profesional work so he offered me a deal I could not refuse and suggested to powder coat all my wheels instead of spray paint which will get damaged in the future due to cheap quality we agreed on an unbelievable deal and I could not be happier with the results which are night and day, the quality, the friendliness, the service, the results are what separate his work from others so if you are looking to powder coat wheels or other items Tyler is your guy I could not be happier with his work I definitely recommend him and his work. Check out the attached image so you can see his amazing work.

I own a motorcycle shop that specializes in customization performance, and we send a lot of parts…read morefor Powdercoat. I gave RF Coating a try when all other places were giving me a two week minimum turn around time. Ty had my parts done and ready for me the next day and at a very humble and reasonable price. His demeanor and customer service were welcoming, professional and incredibly understanding of time constraints. The powder coating was perfect. The customer was satisfied. My job was complete, customer was happy. 10/10 would recommend. Thanks again Ty. Much love brother

Very fast response... easy to work with. Honest estimate and…read morefollow through... would recommend their service to all our clients as well.

This was my second time using Morgan Hill Powder Coating and I'll be back! Quality work quick…read moreturnaround and very affordable pricing ask for Mike he'll take good care of you.

They sandblasted a wind sculpture for me. They did a great job, and it was a quick turnaround.read more

Elliot is awesome. Price is fair. Turn around time is fast. Color match is accurate. Would highly…read morerecommend to people that need custom work done.

I had my cast aluminum patio furniture restored and refinished and am very pleased with the…read moreresults. The set looks better than new! The company was very professional, easy to do business with and did a high-quality job. The only downside is the amount of time it took to complete the job (about 14 weeks). I was not in a hurry so that did not present a problem. The wait was well worth it!

I have used Patio Chair Care, a Division of West Coast Specialty Coating, Inc., in Concord on Shary…read moreCircle, for probably a decade for assorted car parts I want to get Powder or Ceramic Coated. My brother and I took in my new 911 Porsche muffler to have it Ceramic Coated. We met with Dylan and Kyle and they were terrific. Kyle helped us pick the correct color for my project and told us to come back in a couple days and it would be ready. We went back 4 days later and the muffler looked beautiful- a perfect job. I give Kyle and Patio Chair Care a solid 5-Star rating and will not hesitate to use them again. Cheers, Michael H. Auburn, CA

I recently rebuilt the engine on my two stroke dirtbike. While everything was apart, I contacted…read moreArmando to ask about cerakoting some of the covers while the bike was apart. Armando responded immediately and was enthusiastic about doing this project, even though it's a little out of the box compared to what he's posted. Armando met me close to my home in Oakland to pick up the parts. He finished them in about five days. I am extremely impressed with the quality of the work; the price was also competitive. When I picked up the parts in Pittsburgh, Armando invited me into his shop and showed me all his projects and workspace. It was pretty cool to see how the process works, and he was very personable. The whole experience felt like I was getting work done by a long time homie, and I'm grateful for having met him. Thank you for your help!

I had a wonderful experience with bay area arms custom coating. He responded quickly with all the…read morequestions I had. The quantity and attention to detail really impressed me. We worked out a time where I could drop off and pick up my projects. Had no issues whatsoever. Definitely will be doing business again.

My son's only wish for his Birthday was to have his BMX bike powder coated a special color. We can…read moreto All Bay Powder Coating and the service was one of a kind. My son was able to choose the exact color he wanted, even though it was a special order. The result was perfect! We received great work and in a great timeframe. The owner was wonderful and his team exceeded our expectations! Thank you again!

Lupe is the man. If you want the best high end powder coating done correctly. This is your powder…read morecoating shop. Busy as he is, he will take his time and explain the whole process..

Best in class service and final results were better than expected. Price was a great value in…read moreaddition to the quality. Dave was professional, responsive and if you need powder coating, there is no better choice than Maas!

Large filagree fire pit table and castiron patio umbrella base…read more Very fine quality, finish and attention to detail. The finish on those items was so good. We were forced to repaint everything else on the patio.