Easy to work with and very happy with result! Don was able to complete the project in a very…read morereasonable time.

Excellent service and craftsmanship, beautiful work on piece of our office equipment!! Highly…read morerecommend!!

Antioch Convertibles replaced my convertible top and they did a fabulous job but I will say it…read morewasn't cheap but at the same time it was done the same day, I dropped it off in the morning and by 6 pm it was done.

Very helpful and reasonable prices, always Open for Business, Will be using them in the futureread more

Bret was fantastic to work with…read more I had 8 seat cushions to replace because the top layer of cheap "pleather" was coming off. I called him and he knew exactly what I was talking about. He gave me a reasonable quote and explained what he would be doing any why. The finished product was better than new! I would highly recommend him.

Responded promptly initially then ghosted me. No longer interested in services. I had problems…read moreuploading images through yelp but finally did it after multiple attempts. Never heard back or acknowledgement they were seen. So have no idea about the quality or value as I never reached that point. Very disappointed. Wish others and the owner the best.

I had my 1970 cutlass done from inside and out (top) and Alex did a fantastic job! He brought it…read moreback to original. I would definitely recommend him.

Alex takes pride in his craftsmanship and his work shows. I will definitely be back to his shop for…read moreall my upholstery needs.

I had Tim do my Railing on my deck ,the powder coating failed miserably,there is rust every where,…read moreI have asked when he will redo the powder coating I am still waiting for his response.

really terrible work and company to work with. I took a few motorcycle parts here for a custom…read morebike that I'm building. I had to have them do several parts 4 times before it was even usable. They used duct tape to "plug" the fork openings in the motorcycle tripple clamp. It just made a huge sticky mess for me to clean up but the tape had covered sections that should be exposed. Now that I'm installing the parts i've had multiple locations where in just regular assembly (no hammers or force) the finish is flaking off. I can then just keep picking it with my fingernail. I also found that they had dropped my swingarm at somepoint before they powedercoated becuase the hole that my bearing needs to go in was clearly smashed in. Good luck to me getting a swingarm bearing back in a hole that isn't round anomore. There were also several times they told me my parts were ready and to come get them only for me to show up and the shop was closed with no one there. I did get a response when I texted but only to say they had left to go to another job, even when I had confirmed with them what time I would be there. Really bummed that I paid almost $400 for what ended up to be nothing but a hassle and a waste of time.

I have reviewed Mobile Solutions before, but wanted to add another as I have had another…read moreinstallation experience with them. Once again they have done an outstanding job with the installation, and provided exceptional customer service. Highly recommended!

I've been working with them for 6 months plus and all I can say is they take pride and what they do…read moreand they're probably one of the best companies I've dealt with in years. very friendly and professional. they go above and beyond to make sure that the customers is happy. A true pleasure doing business with.

I wish I could give them negative stars!!…read more They failed to ever diagnose the boat, and started doing work on what we said we thought it might be without knowing for sure. He then tried to put in a rebuilt part vs a new one without asking us what we wanted to do he did work without getting our approval. Then he had the nerve to get angered with us when we told him it was illegal to do work on any automotive vessel without customer approval. He then refused to do any more work, stopped replying to calls and texts, and left our boat taken apart. They never provided us with any invoice or any receipts to show us what they actually did, I think because they never did anything at all and were just trying to take our money. We had to bring it elsewhere to get fixed and it costs us over twice as much as it should have because of the incompetence and unethical business practices done by the Chandlery. We found pieces of the boat that should have been reattached sitting in the cup holders. The boat was left in shambles complete a mess dirty (shoe prints all over the seats) and not put back together. I think they saw 2 younger people and thought they could scam us. There's a reason they aren't accredited by the better business bureau. I'm now looking into small claims court.

Don't let the Chandlery touch your boat, they don't know what they are doing and have horrible…read morecustomer service. During an annual fluid change preformed by the Chandlery, they did not install the oil filter properly, causing 6 liters of oil dumped in the hull of my boat. They apologized and said they would make it right, clean all the oil out and make it new again. Unfortunately after having the boat in their possession for two weeks, and multiple opportunities they were not able to clean all the oil. They tried and said it was the best that they could do, but they simply did not have the equipment or knowhow to clean the oil out. So I requested that we go to a 3rd party to clean the boat, they said fine and I would let them know the cost. I took the boat to a professional boat shop and luckily they were able to get it clean. It cost me over $500 and the Chandlery will not pay for it, saying they could have had it done by their vendor for cheaper. Weird thing is they never even offered. Not only was I over charged for the oil change, the Chandlery will not reimburse me for the clean out. Honestly, I was not upset with the mistake. I gave the Chandlery plenty of patience and opportunity, it is just sad that they will not make it right...and rude about it too. Stay away!

I had a situation where someone scratched my wheel by accident so they had me contact Tyler at his…read moreshop to get it fixed. I called Tyler and realized how nice and professional he is he right away told me he'd take care of it, my wheel was painted with regular spray paint and even though that's not his expertise he said he'd figure it out so he got to it then later he called me and said the wheel was almost finished but him being and true expert and professional said he was not happy with the results because he likes to turn it really perfect profesional work so he offered me a deal I could not refuse and suggested to powder coat all my wheels instead of spray paint which will get damaged in the future due to cheap quality we agreed on an unbelievable deal and I could not be happier with the results which are night and day, the quality, the friendliness, the service, the results are what separate his work from others so if you are looking to powder coat wheels or other items Tyler is your guy I could not be happier with his work I definitely recommend him and his work. Check out the attached image so you can see his amazing work.

I own a motorcycle shop that specializes in customization performance, and we send a lot of parts…read morefor Powdercoat. I gave RF Coating a try when all other places were giving me a two week minimum turn around time. Ty had my parts done and ready for me the next day and at a very humble and reasonable price. His demeanor and customer service were welcoming, professional and incredibly understanding of time constraints. The powder coating was perfect. The customer was satisfied. My job was complete, customer was happy. 10/10 would recommend. Thanks again Ty. Much love brother