I have a 25 year old McClane front throw that wore through a bushing on the rear wheel. A1 gave me…read morea reasonable initial estimate. When the repair required hunting down additional parts, Louis never changed the quote. He tracked down high quality replacements like he would if it were his mower. The mower is running great now, perfectly sharp, and rolling easy.

I've been going to these guys for 25 years. My last experience really forced me to write this…read morereview. I'm not sure why I didn't write this sooner but these guys are simply the best. I'm not joking around these guys know what they are doing. I brought my riding lawnmower, which is a Husqvarna for a tuneup. I dropped it off in the morning and picked it up in the afternoon. That's what I call SERVICE. I'm writing this review because they have no idea I am writing this, but I want others to know that these guys are the best to go to. I don't care who you know. Good luck trying to find a better repair shop than these guys. They are the best hands-down.

I have a turbo downpipe that needed my recirculated dump tube length adjusted and cutting my…read moredownpipe in half to add a 2.5" vband before the bends. I called the shop and spoke to Joey and explained what I needed. He gave me quote over the phone and I decided to stop by. When I arrived I showed him the parts explaining what I wanted to do. Joey said he could get it done by next morning and gave me a final price, which was within quoted price over the phone so I agreed. Joey completed the work as stated and I am overall happy with the work. Will be back when I need more fab and welding done for my projects! Do note that this was labor only and I provided all parts. Pics show before and after.

Where to begin, Our family purchased our first Pop up tent…read moretrailer, a huge step up from our typical camping tent. We were excited to bring it home but noticed we couldn't get it into our driveway. The bumper was to low on the driveway and was getting stuck on the cement. I called around to all the RV stores and for some reason they all recommended ABC Welding in Anaheim. Well here comes ABC Welding to our rescue. Chuck was the nicest guy, very personalable and extremely honest, he told me to replace my hitch to a lower type hitch and that might solve my problem. He could of made a quick dollar off of me but chose not to . I replaced the hitch a week later and it still got stuck on my driveway so he suggested we add caster wheels to the lower bumper to clear the driveway so I brought it back to him and he did an amazing job! A few weeks later I brought back my trailer for a hitch attachment since he did such a great job on my caster wheels. He just didnt do a hitch attachment but a work of art, literally! He changed the spare wheel attachment point directly on to the bumper to accommodate the extra steel to placed to reinforce the bumper. It went from a 30lb. Bumper rating to well over a thousand pound gorrilla rating. This new setup can probably haul another trailer or a boat, that's how strong he built it. Again it's a thing of beauty and structurely superior to other bumper setups I've seen. I can't give enough accilades about this gentlemans skills and business practice. To simply say it, Chuck is Great!

These guys are really friendly and I was very happy with the service I received. I took an air…read morecompressor in for a much needed overhaul. We had to wait a bit for parts, but once they arrived the boys at Wisdom fixed up my compressor FAST! Their pricing for the repair was reasonable. I don't often need to take tools/equipment to get fixed but I will return to Wisdom Tool Repair if the need arises in the future.

Quick service at a fair price. They warranty their repairs too. I highly recommend them for all…read moreof your tool repairs.

I decided to give Engine Supply a try after my previous engine developed a major oil consumption…read moreafter a rebuild. I have yet to disassemble and determine the cause on that engine. I needed some cylinder head refresh work done on a replacement engine and took my head here. It's for a bmw s54 engine. I understand Engine supply does a lot of domestic work but will also do European and Japanese engines. After speaking with one of the guys, I found out that it's a family owned and operated company. The guys are definitely knowledgeable. The cylinder was picked up and was in great clean condition as expected by a good machine shop. What impressed me was they took me to the back to show my cylinder head during assembly when I dropped off my valve seals. The shop is well organized and clean. When I picked up the cylinder head, the Machinist who worked on my cylinder head also mentioned that the valves were returned in the exact order it was removed, which makes putting the shims I removed back it the same order easier to adjust the valve clearance on assembly. The cylinder head was assembled back into the used block. And is now running in the car without any oil consumption. It has done multiple track days without issue. I'm very happy with their work and can vouch that you are getting top notch quality work. Thank you Engine Supply Team! -Clarence

Decades of experience and quality work. I have used them several times and they know BMW motors.read more

Small shop but they have just about everything you need to fix your lawnmower. I needed a part for…read moremy lawnmower and luckily they had it in stock.

Mom and Pop shop no more. More people in front then actually needed so overhead just inflated their…read moreprices. So I took in my weed eater in the head came off I needed a missing spacer. Off the bat she told it's 30$ just drop it off and check it. Ok so I got a call a week later it was 42$ for the washer and install. Also the gas tank had a crack in it which I had patch it with a hardner. New dual gas line and spark plug & $225 more. I deny it since my weed eater started no problem and worked. So I pick it up later at home I gas it up a new crack and it won't stay on. So I won't be coming back and won't recommend it friends and family. Time to find a new repair shop

Brought my F150 in and supplied a Corsa Catback exhaust. Pretty straight forward job but Big B did…read morea great job and was done in a timely manner. Good pricing as well. Overall great service and would definitely come again.

Highly recommend Brandon for the job. He makes it so easy…read more My 2004 ML was saved because of him. Thank you so much for your help!

I realize everyone can have a bad experience with a small business and write a bad review but the…read moreone I am reading prior to mine is shocking. I also know there are two sides to every story and why Bill hasn't responded to this bad review is beyond me but maybe he is being the bigger person by not doing so, I won't judge. I purchased my Toyota forklift from Brian many years ago and he has always provided good pricing and prompt on service calls. If you need to make a purchase or need service, call Brian and he will take good care of you.

The worst service ever! Stay away from this place unless you want to be scammed…read more I own multiple forklifts and bought/sold many of them over the years. But never have I ever dealt with a person more incompetent and shady than Bill - the owner of BJ's Forklift Services. Our initial encounter was having him come out to our warehouse to service our forklift which he did and was generously compensated for. Then he stated that in order to fix the second unit, he needs to order parts for it. After weeks of going back and forth and not returning, he told us that he can't find the parts and is walking away from the job. What a professional service, huh? I should have walked way from him then but he offered to sell us a unit instead which I agreed to. I liked the forklift he was offering to us. I drove to his office which is not close and personally looked at the unit and offered to buy it. Bill and I shook hands on it which I realize doesn't mean much to him. I offered to pay half up front and half at delivery. I asked him if I can Zelle him to which he replied that he does't know how to use Zelle and needs his wife to do it. So I agreed to wait for his wife to set it up and let me know when I can pay him. For WEEKS, I kept following up with him asking him to pay him so I schedule the pick up of the forklift. I also asked to add a battery charger for another $1,000 (which should come with the forklift but apparently not when you buy from Bill). Finally, after another follow-up to see if I can pay him and pick up the forklift, he told me he sold it to someone else and said "sorry." Apparently, "sorry" is all a grown man has to say to you after he agrees to sell you the forklift and shakes your hand on it. I call this a sleazy and shady technique to fool one buyer all while securing another buyer for a higher profit sale. It is not only unethical but is also pathetic. He is lucky I didn't report him to BBB for unethical business practices. So yes, stay away from this place.

Every time I have needed a part for a garden or lawn tool they have always had it!! And if they…read moredidn't have it in their immediate stock they would order it and I would have it quickly!! There is a reason all the lawn and garden pros go to Alan's!! Don't take my word for it, check them out for yourself!

Emilio really took care of me well when I was looking for a trimmer. I got a great deal. Thank you…read more PS: I rarely give five star reviews. You have to leave room for future improvement!