Andy provided prompt professional service. Although the task he performed for me was small, it was…read morean important component I needed repaired to get my rig running and back on the road. I was a walk-in customer and Andy was able to handle the job while I waited. I would suggest contacting him ahead of time to make sure he's available. I've never needed welding work before and wasn't sure what to expect to pay but I feel his rates were reasonable. I would hire him again and recommend his service to anyone.

Gentleman did not communicate nor was he responsive after our initial phone conversation. I came in…read morefor a consultation on previously discussed work and all seemed ok, however, after dropping off critical work machinery at his establishment he went dark. After numerous unsuccessful attempts at reaching him both via-cell phone and physically showing up at his work place, I decided to take my work someplace else. Andy seemed like a decent hard working person but his work ethic was not what I was expecting. I love supporting small business but this time was very difficult.

All I have to say is thank you the trailer turned out amazing. I can't wait till we start the new…read moreone.

I needed a small custom job done (literally, like $200). Wasn't sure if Cambero would be…read moreinterested, talked to Angel (the owner) and he could not have been more helpful and willing to consider it. He then came to the house and checked things out. Created a perfect piece for my needs and his guys came and installed it. They were polite, respectful and knew their stuff. Cleaned up WAY more than was needed and everything is perfect. Really appreciate their concern for helping me out with a job that was certainly not "time to retire after this gigantic job"!! Great people, great work!

the pipe is amazing for the mini bikes they port polish heads they do a lot id say it's a very nice…read moreshop

Got my Honda Cbr1000 block welded that was cracked .. saved me from having to replace a whole…read moreengine.. thanks

We had a break in a few doors down from our warehouse, they smashed in the windows and took a lot…read morefrom our neighbor. Had me nervous, so I commissioned JSC to build and install some security bars for our door and front windows. We have a pretty rough around the edges office for our guys so I didn't need anything too fancy. He made them to our specifications in a timely manner and installed them in a way that is pretty non-invasive since we rent. So that if we ever have to move I can take them with easily! Very happy with the finished product.

JCS Welding added some automatic arms to a manual gate that we have at our house. They welded two…read moresections of bifold gate together to make this work. Would highly recommend them for any gate/welding projects!

Huge thanks to Haik for trimming my grill grates to fit my BBQ perfectly! He knew exactly what I…read morewanted, and the result was flawless just how it should've come from the factory. I highly recommend him to anyone needing metal or aluminum work. He's truly an expert in his craft, plus a super friendly and humble guy. Top-notch service!

Hike was very helpful and quick. All I needed was an angle cut on a couple of solid steel counter…read moresupports. It was done so fast.

We needed the "arms" on an expensive basketball column/hoop welded in a fixed position since the…read morevariable height feature was no longer operational nor needed. I sent a photo to Ed and he immediately knew how to make the necessary repairs. Ed agreed to come to our home at 10:00 am on a Friday and he arrived just as he promised. There was a damaged and unneeded bracket on the column that Ed was able to cut off and weld a steel plate over the opening. Not only is Ed a wonderful, engaging personality but he is also a master welder. His "beads" are outstanding and his fees are very reasonable for this type of "in-home" service. If you happen to read the only negative review of Ed's services, this was a situation where Ed was attempting to help a person on a Saturday when Ed is not usually working. This unfortunate situation could best be described as "no good deed goes unpunished" since Ed's attempt to help this person on his day off was greatly unappreciated by the "would be" customer.

Ed saved our customer. We found Mobile Weld Specialist after another welder made a mess of our…read morecustomers car and left us in a bind. He was extremely professional and gave us a quote over the phone and we scheduled our appointment. He was prompt and his work was perfect!! Not only was he able to fix what the last guy had made a mess of, but fixed it correctly and it looked great for less $$. We would highly recommend Ed! Also to note this was a vehicle we needed some mobile welding on which we were struggling to find someone who was mobile that worked on vehicles.

Aldrin with Union Brothers Welding did a great job repairing an iron fence at my mom's house. They…read moreare very professional, the quality of the work is amazing, and they offer great competitive pricing. I will be calling them again when more work is needed. My moms home needs a lot of work so the pictures are before the fence was painted.

Aldrin and brother Juan came to fix my gate because the door hinges felt off. My gate was fix in a…read moretimely manner very professional. Great quality of job and reasonable price!!! Union Brothers are friendly and get the job done Immediately. Please don't look further this is the place you need to call. You won't regret it.

Since my last review of smaller projects/repairs (experience was good), I've brought them more…read morebusiness, thousands dollars' worth of business. Everything is good when they are TAKING your money and business. But, once it goes the opposite way (refund), Roger gets NASTY -- I didn't see this side of him before, always with a smile because while taking money in. I brought some parts to be replicated; 1" shaft with the center with a 2" diameter cylinder with 1" flanged bearings. I was suggested another way to "make" the part that would make everything more "simplified" for me, okay, sure. I wasn't sure what he meant, but after minutes of trying to explain to me, I just went with whatever Roger suggested since he would know better about the mechanics of machine parts, etc., He just told me that I would have to source the bearings myself, which is what I did. He asked me if the diameter could be smaller and I said yes. So I trusted his word and went with it. When I picked up the item, he said, "If it doesn't work out, just bring it back". The thing is, I complained after because what he sold me for almost $400, was NOT SOMETHING HE "MADE". It was a part that could be bought online (~16", 1" shaft with 2 shaft collars), which can be found on Amazon for $35 (shaft) + $10 (2 collars). He then said that he bought it McMasterCarr, then quickly changed his wording to "WE MADE IT". So which is it? (I will never know, but my assumption is he got it at McMasterCarr, as he first stated, or another retailer). Then he said, "I'M NOT HERE TO SAVE YOU MONEY." JUST WOW!! It's my fault for not understanding what he was trying to sell me, but it's obvious my lack of knowledge was taken advantage of--I let Roger do what he does. I believe there is a big difference between MAKING something and up charging for labor, etc., vs. buying $40 dollars worth of parts and CHARGING 9X-10X more!! Especially, to someone (me) whom he kept calling "friend" after all the visits/business I gave him. When he did this "work", I also dropped off a small part that had a broken screw stuck in it. He said it was FREE OF CHARGE to extract it. Anyway, when he agreed to refund me for the $400 (16" piece of 1" shaft), BUT he charged me $85 for the screw extraction that he told me that was free! From ~$400 refund, I received $85 less. This costs him nothing (almost literally) to fix easily. $85 FOR A SCREW EXTRACTION--HIGHWAY ROBBERY!!!! He gave it back to me, with a new screw, "I also gave you a screw". (Oh, gee, Thanks, I guess.)--But I didn't need that screw as I have 100's (if not 1000's) of these screws for my parts -- so he acted like giving me this screw in place of the broken one is a huge hook up, after I spent thousands and thousands of dollars here. I paid for this with my personal credit card, but he made out the refund check to the company I work for. So I asked him if he could cut the check out in my name since I'm the one who paid for it. He said, "just give it to your company and have them pay you." I explained to him that I can't do that because of accounting issues, etc. He got mad and he snatched the check out of my hand with an attitude. This right was the last straw. I was still going to give him more business (which I even told him, thanks for the refund and making this right, I'll be back). He told me, "I DONT CARE ABOUT MAKING THINGS RIGHT AND WHAT YOU THINK, I DONT NEED TO RESTORE FAITH IN YOU OR YOUR COMPANY". Okay, fine. ^Great attitude, perfect way to lose business after the fact that I stated that I hope this one issue won't affect future business and that I would be bringing more business. Roger shouldn't be interacting with customers on the front line if that's his attitude and represents your company. On the other hand, Alex is very polite. While Roger was deflecting the situation, blaming it on me, arguing who said what, this and that. Alex is the one who apologized on behalf of C&H Metal with a smile on his face, while Roger was steaming mad at the situation -- just the way he snatched the check out of my hand says it all. ALEX IS THE REAL MVP at C&H Metal, too bad he's not at top management, because management up top is clearly lacking customer service skills and lacking know-how to keep the customer acquisition costs low. I can bet they'll see this review and Google what CAC is because they don't know. Or maybe, they are making so much money, they don't care how they lose a few customers the way they do. Roger (mgmt) just knows how to take money with a smile on their face until you complain about something, then it gets nasty. This is the type of business you don't want to give business to. If you do give business to them, good luck. Hopefully, it's a short stint because eventually an issue will arise, and Roger has a short fuse, and you may not like the way he handles it. This experience was a blessing in disguise because I found a better and CHEAPER shop to do work for me.

From start to finish, their communication and service were top notch. I've been trying to find…read moresomeone to help with a fabrication for a kitchen hood vent, and finally, found the right company to do it! I would strongly recommend using C & H for your any of your fabrication needs. Great job!