Diesel services called me to ask if they could make good on some unsatisfactory service. So I took…read morethe RV back to get things right. They finished the project to my fullest expectations. Plus they identified a EGR valve carbon problem and did a very good job in getting it fixed. Good job guys. Thank you for your commitment to good service. Cheers. Bruce H

Communication could be better. Nick was nice. Truck runs good now. Thanks. I would take my truck…read moreback there.

I've thought about what I was going to say for a few days now, My son who left his truck in the…read morecare of his brother (my other son) while he was overseas on deployment. He wanted to have his truck lifted and his brother did that.. however before the deployment he and his brother replaced tie rod ends.. between that time and the time of the lifting, less than 300 miles were put on the truck. So the truck was lifted and new ball joints were put on, new brakes and roters were installed.. Then my son and I did some general mechanical/maintenance/repair to fix windows, and replace a sensor that controls the cruise control and shifting.. To test that we had to drive the truck up and down the road. New tires had been installed by Discount Tire who also does alignment but my son said he had heard good things about Louie's.. so we didn't have it aligned at discount tire. We didn't want to drive it too much as it was not in good alignment and we didn't want to destroy the new tires.. So that's the background, on the day of the alignment my son drove the truck to Louie's alignment and dropped it off.. Later when he went to go pick up the truck they told him that the tie rod ends and the ball joints were very worn and needed to be replaced. They showed him how loose the front end was.. immediately this raised a red flag as the truck was tight the day before and the day he drove it into Louie's.. My son drove the truck back home and called me on the way, he told me that the whole front end was wobbly and hard to control.. he didn't know if he was going to make it.. That evening after work he put the truck on jackstands and found that almost all the front end parts had been loosened "hand tight" was the term he used even parts that were not involved in the lifting (upper control arms)... Apparently since the truck was tight before taking to Louie's. When confronted by this over the phone by my son who is still overseas and called Louie's they told him that whoever did the work didn't know what they were doing and had a ready quote for the repairs at $2,500.00.. interesting they had worked up a quote so quickly.. So the bolts were "re tightened to factory specs" and now the truck is scheduled to be aligned my discount tire. my question is.. why would a repair shop knowingly loosen bolts and attachments? Then after doing so, cover their tracks by letting someone drive it off, the truck was unsafe after and a crash could have occurred.. I read Louie's web site and see they have been doing alignments for 40 years.. (what exactly have they been doing?) or do they have some loose cannon in the shop thinking that someone just fell off the turnip truck?

This shop and the people that own and work there are amazing not only did they fix all the issues…read morewith my car they went over and beyond fixing it and the price was very reasonable. Thank u for all you did for us

What a fantastic repair shop. I was not expecting to find the high quality Diesel & Jeep repair…read morefacility that I did with Windsor Diesel. Eric (owner) is an outstanding diesel & 4x4 technician. He doesn't just replace broken parts with new ones, he uses his experience, common sense, and intellect to improve upon what caused the problem in the first place. I took my 1999 Jeep Wrangler in for a really bad vibration - rear driveline. The CV was worn out. I had problems with this for many years and even had the transmission rebuilt. Eric had a custom manufactured, heavy duty CV with critical balancing technology made for my specific vehicle. After spending in excess of $10K in Phoenix over the past 12 years to get rid of steering wheel vibration, Eric has my jeep purring at high speeds. Windsor Diesel is the only shop in the four corners that I will take my 1998 Dodge Dually (Cummins engine) and my 1999 Jeep Wrangler to for any/all repairs. Great, high quality work at very reasonable prices!

I always take my car here. When I first moved to Greeley I had a very difficult time finding a…read morereliable mechanic. Everyone I found was overpriced and could not fix my car in what I felt was a timely manner. I am a delivery driver, so it is imperative that I have my vehicle in good running condition and available at all times. Not only is Greg a great mechanic providing excellent customer service, he is also understanding of my situation. If you are someone like me who needs their car promptly without breaking the bank then this is the place for you!

I first started going there about 20 years ago. I was at Weld county garage And they told me my…read moretransmission was bad took it to Greg for a 2nd opinion when i returned he had fixed the problem. He stated it was a minor problem so it fixed it on the spot. WCG wanted 3 thousand to repair my truck he repaired it for 40 bucks been going there for 20 years and he has always been fair and always stood behind his work. He guarantees his work . He has worked on every car and truck I've had in the last 20 years. Greg is honest and fair. I will never trust anyone else.

Visit their new location at 187 12th St SE STE 6, Loveland,…read moreCO 80537 They fixed my Jeep and got me back on the road I had damage that was caused by a dealer from a previous service that was going to be incredibly complicated for me personally Kevin and his team came up with a solution and did everything in an efficient and timely manner they were beyond honest straightforward and right up front I could not ask for a better experience with a car or to meet a nicer group of people if you have a car issue diesel classic whatever it's worth a call to them.

In today's world, the easy thing to do is take your vehicle to the dealership and let them work on…read moreit, because that is all they work on right? Well it's refreshing to know someone who can work on all kinds of vehicles, because he knows his stuff, and he is a good man too. How many men do you know who have their son's working for them? Most want to get as far a way from their dad as they can, but not Kevin's sons. Kevin has taught them a very valuable skill that will be needed for years to come, but more importantly he is teaching them how to be a man. They do great work, and let's face, everywhere you go, will be expensive. That is just reality of today's world. Everything is expensive, but rest assured, when anyone works on your vehicle, you will get what you pay for and Kevin is not out to short change you, but he will shoot you straight. I take all my vehicles to Kevin. They will be done right.

First and last time I take my vehicle I got charged twice…read morefor a diagnostic. Within one week of them erasing the codes because of the engine light. After driving it for two days light came back on so I took it back and got charged again telling me it was an oxygen sensor and charging again for diagnostics. Oxygen sensor showed up before they erase the codes according to Colorado Air. Anyway I thought this would fall under the same first diagnosis but it didn't so I got charged again . Awesome people. Just thing that charging twice was disappointing.

These guys were great! I originally took my car to a different local shop but they had told me to…read morejust throw parts at it and see if it would fix it. After getting a recommendation from the parts store that Sumner Automotive would be the best place to take my car, I stopped in to talk with them. They went above and beyond helping me to get my AC fixed and blowing cold! I would highly recommend them and will be bringing my car back if/when it needs to be worked on again.

I had a great experience with Ryan! I gave him a brief description of what problems I was…read moreexperiencing, and after a diagnosis, he described the issue, solution, and cost in layman's terms that made perfect sense to me. My car was repaired and I am thrilled with the results! The cost was very affordable too! These guys are renowned for high performance upgrades/tuning, which may make you think the service will cost a lot, but it doesn't cost a lot! These guys know cars! I'm very satisfied and will return for future service.

The guys at Funk E Built did an amazing job installing a IAG short block, new turbo, upgraded fuel…read moresystem and a ton of other new parts. Ryan called me at least once a week to update me on the progress as well as every time they ran into an issue with poor backyard maintenance practices. I have 1,100 miles on the new engine now without a single problem. I can't wait to see what these guys can do with a tune once the engine is broke in. I would recommend Ryan and the guys at Funk E Built to anyone looking to make their daily driver a little more fun to drive!

Everything that I have taken to Mike has to get redone I trusted him to fabricate a box for my…read moretrailer and was charged $700 I trusted him and paid him in advance only to get the worst quality ever. It is falling apart. It does not even fit the generator. And he only made excuses for the poor job that he did. Saying and I "I know that it is not a good job I can fix it another time" he gives out piss poor Work out of a storage unit. His own family members has warned me not to trust him and he scams people and I still went against What they said thinking that they were being vindictive. All reality I should have listened to the warnings. If you do any business with him at least you know now someone warned you.

After installing a 3 inch lift on my 3rd Gen 4Runner. I needed a panhard correction brackets…read more Welded on to realign the rear axle. I had Mike do the job he did a great job on welding on the pandhard correction brackets and making sure the rear axle was squared up. While he had it I had him change out my outer tie rods he had it all done in a timely manner. Quick turn around thanks Mike