Flawlessly fabricated a set of custom anodized aluminum sailboat hatch frames. Specifically, Taylor…read morewas a deeply knowledgeable professional craftsman who collaborated with precise communication skills in the manner of a trusted advisor. I've always believed that a company can/should be judged by the quality of its employees. As such, CCMF is fortunate to have such great skilled workers contributing to its longstanding success. I recommend them without hesitation.

I needed a quick one weld job in a pinch. Called and they said come on down - they completed the…read morejob while I waited. Great service and fair price. I will be back with a bigger job for sure!

Wait...in this modern age...they came out...gave us a reasonable estimate along with their expert…read moreopinion....came back out and installed something that looked wonderful...had great followup...installed the handrails early.....trusted me with getting the payment to them since I wasn't home....didn't mess anything up... Not used to this "old school" behavior anymore...this business is a class act.

Happy to give the crew at Eagle Ironworks five stars…read more Excellent craftsmanship, easy to work with, offered lots of options while holding true to the original quote. Completed the job quickly (especially in these Covid times) and did a quick, clean and professional job installing the railing.

Very flimsy material and not worth the price. Too expensive to return due to artist from outside US.read more

James did an awesome job designing and fabricating a specialty bracket for our AAA motocycles. He…read morewas very patient with us even when we changed the prototype 3 times. I highly recommend Hell Bent for any of your specialty fabrication needs.

If you're looking for welding or similar metalwork, your search is over. Go here…read more I recently bought an old steel bike frame with a very poor repair to one of the joints: there was barely any metal holding the joint together, and there was a hole melted in one of the tubes. I was concerned that it'd be hard to get the joint properly repaired, and/or prohibitively expensive. I stopped by Custom Metal Manufacturing around opening time. The workshop is a treasure trove: minibikes, custom signs, and sculptures everywhere. Ed and Gerard were super friendly and great storytellers. Ed looked at the frame, said "I can fix that", and fired up his welding gear right away. Ten minutes of good conversation later the work was done, and at a very reasonable price. The joint is now reinforced with ample steel, and the hole is closed up. Everything I hoped for and more.

A shoutout to CMM. I decided to drive over with an item that needed welding. They were able to…read morecomplete the job right away. Friendly service at a competitive price (another company was 4x more expensive and said it would take a few days). If you need some welding, call or visit them. You will not be disappointed.

Disappointing experience overall…read more Verbal bid was given of 10k to 11k for the job over a FaceTime phone call as the project was explained. I politely asked if he could please try to keep it near the 10k. Written bid came in over 11k. (11,700$) Discussed that the bracing for the large metal stairs should probably be secured by something more than anchoring into stucco. To add proper supports the bid goes up again to over 12k. (12,800$) I would have liked a more professional experience where pricing didn't keep changing and for Christian to take the lead on making the stairs braced correctly and safely from jump. He kept saying this is simple we don't need to discuss the job so much. Also I had originally texted him to FaceTime me when he was onsite. He was on time but didn't respond to my texts. Had to wait 20 minutes for a response. He already left the job. Had to drive back to the job to be able to Facetime me. It is a large job that involves a lot of safety concerns. Was really looking for more professionalism to have the job bid correctly from the beginning and the scope of the job to be discussed throughly on time to get it created safely.

Christian (Kriz) was amazing to work with. Friendly, listened to the goal and great resulting…read moreproduct. Would definitely use again

Worst welder I've ever worked with. I work with many welders, and this was by far the worst…read moreexperience. Things started well with the owner, but went downhill once we were handed off to the production manager, who showed little care for customers or attention to detail. Despite clear instructions, their own forms, and detailed sketches with photos, the final product did not match the agreed-upon design. Their lead time was far longer than promised, causing major delays, and communication was terrible--we constantly had to chase them for updates. Prices are extremely high and absolutely not worth the results. After sharing my experience with others in the industry, many had similar negative stories about Concord Sheet Metal. I would never work with them again and strongly discourage anyone else from doing so. Save your time and money and go elsewhere

5 stars and a bonus to Sean Murphy and his wonderful team for crafting our wonderful stainless…read moresteel kitchen counter with the welded in sink. Sean was extremely patient with all our questions. He and his team, including Gabe and Willie, went above and beyond to fix the one goof and made it 100% perfect! Thank you very much!!!

Wow! Awesome!! I…read moreHad a stuck, broken bolt on my engine block (351w, 94 F-150). I tried to extract the bolt, but broke the screw extractor off in the engine block. Then I tried to weld a nut to the broken screw extractor to back it out. However, I couldn't get my weld to stick, so I called in the professionals. M&M came out in less than an hour. In 15min, Miguel had the screw extractor & bolt out! Then he took the time to tap the hole and correct the threads (correcting my previous attempt to extract the broken bolt). This is an awesome team. Highly Recommended!!! Saved me an enormous amount of time and money. I will be using them for future projects including railings and fences.

We have a metal ice cream table and two chairs that are antiques and have sentimental value, they…read moresat outside the general store my wife's great-grandfather owned in Connecticut. The wood seats of the chairs had fall apart and we asked M&M to reinforce and replace them with metal seats, and then paid the table and chairs. I was a little nervous giving M&M this project since we hadn't worked with them before and the table and chairs had value to us. M&M did a great job! The new metal seats fit perfectly and the quality of the paint job was excellent. And, they did the work in about four days. They did a great jobs for us!!

Excellent team. Responded quickly, showed up on time and completed a welding project efficiently…read moreand with high quality.

They responded quickly when I called and texted…read more Communication was a small issue. There was a misunderstanding but they were very gracious about it.

Amazing work!! Very professional and clean work!!! Brandon worked with us from the design to the…read morefinal project! We highly recommend him!!! Thank you

From the owner: Custom Designs Bay area fabrication. Steel, Stainless , Aluminum. Hand Built Wrought iron gates,…read morestair rails, balconies, fencing gazebos, pergolas, planter hangers, planters and all other home decor. No catalogs ever. We can design from a small simple garden gate to an elaborate stainless steel and glass multi function security gate.