Tony was awesome! Got our Rexnord Planetary Box back up in running ASAP after an emergency. They…read moretook care of everything 10/10 would use again

Kept me informed the whole time of what was going on. Got it repaired in a week and everything is…read morerunning smoothly!!!

Customer Beware…read more Here's another negative review, I had my heads repaired at Claros Heads months ago and they looked like they were good. BUT! they didn't hold a seal, down below I have the images of my heads at the engine shop who's building my engine. As you can see the images the dial is in the red showing a leak. The technician also shows a test with his finger showing it in the green as he was holding it down with his finger. I gave Claros a chance to run through the heads once again and make things right. They performed a test in front of me by pressing down on the compressor and letting air pass. The test is supposed to consist of pushing air into the head and releasing the air and watching the gauge remain in red to ensure the integrity of the seal. That wasn't the case. I already paid cash up front, and Luis who is the owner was already having an attitude and claiming not to believe shops when I have video proof. Please do your due diligence and look up videos on how to test heads prior to coming hear if you wish to give them business. I understand he's been in the business for 50 years but hey, I'm sure he has the luxury of having his technicians do the job as he supervises. The shop I went to showed me multiple heads that remained in the green with 0 leaks. The leak I was at was 80%. This was unexceptional.

Let me start by saying that if i had an option to not give any stars i wouldnt. Horrible…read moreservice...i get a quote over phone to clean and test my toyota head....$70. Then the next morning i call to confirm before i deliver my head and he says $75.00. Ok...fine...i take it then i send a friend to pick it up and my buddy says hes charging him $90 plus $5 for using a credit card/atm. Then my buddy says that he was told 75$ so the guy drops the price to $80.00. I have never heard of such worst customer service than this. Im even wondering if they even resurfaced my head or performed any work to it. Never again. Steer clear, stay away, dont even think about it. I read their google review and some guy said they never replaced their seals on their head. What is wrong with these clowns at this shop?

Great quality and friendly service. Prices are fair but you get what you pay for- highly recommendedread more

I was recently looking for a new machine shop in the area because my old machinist retired at the…read morebeginning of the year. After trying Primos machine shop I was very pleased with the machine work and customer service he provided. It's been a few months now and all the cylinder heads I've taken them have came out perfect every time. Definitely recommend

AA Waterjet did a great job machining some decorative aluminum gears for us. I definitely recommend…read moretheir work to anyone who need waterjtting.

This company is awesome! I am working on a small electric guitar project. I needed two small…read moreinstrument control plates cut. I brought in some dxf files I had made of the plates I wanted cut. Peter walked me through my options for metal and I chose stainless steel so that it could be polished. The job was done professionally and the turnaround time was very quick. Great communication and I could not be more pleased with the product he produced! It fits into the guitar perfectly!

Jeff was great to deal with and provided precise machinework within a reasonable timeframe that…read moredidn't break the bank. I look forward to doing business with them in the future.

They came over and spent hours fixing everything I needed done in the house. Jeff was very…read moreprofessional and nice to work with. He is incredibly handy and talented and I would recommend his services to anyone.

Insane Shafts Part# IS-BRK-1 B-Series Hydraulic Type…read moreIntermediate Shaft/ Half Shaft (M/T). Rated at 500hp The B-Series Intermediate Shaft (Half Shaft) fits great and looks great. Also they are not available new unless you buy Insane. This part was best price which includes shipping and tax cost over any other company on the internet. I definitely recommend this company to anyone!!!! A+++++++++

Mark is definitely the man to go to for all your Honda engine swaps and more!…read more I can't speak highly enough about his work, I had an amazing experience here and I'd definitely recommend him to anybody who needs an partial swap, full swap or basically anything you want. The best part is that he makes it SO easy. All I had to do was tell him what I wanted and he made it happen. Even with a global pandemic going on, he found me the engine and transmission that I wanted and he installed it PROFESSIONALLY. My car runs 110% absolutely no issues whatsoever. That's what I liked the most, Mark does excellent work the right way and doesn't cut corners. The pictures will speak for themselves. I wish I could give him 6 stars. THANK YOU AGAIN MARK!!

Basically confirming another review that inspired my son and I to use this shop....The service was…read morequality....and instant. It was literally about an hour when my son received the call to pickup the flywheel after being resurfaced....This place is a hidden gem....!

Came to these guys to get my flywheel resurfaced. They quoted me a decent price and finished the…read morejob in about an hour. The end result was a flywheel that practically looked brand new. I would recommend these guys for machine work, quality craftsmanship for sure. Also check out their Instagram for more pictures of their work. Definitely an art to their work.

Great work ‼ I've used them in the past and never had a problem with repairs. If additional work or…read morea problem was found during repair I was always updated.

Great guys and very reasonable pricing! Machined some spacers for my car same day with no notice.read more

Been going to Karl's machine shop for years, great service. Rick is an awesome guy. Very good work.read more

It was my first time going to a machine shop to get a Volkswagen AWM 1.8T cylinder head decked…read more Luckily, Rik there helped me out. I didn't know you had to remove a lot of components and pretty much get to the bare head. Well, with his experience, he was able to close the valves and get a good clamp on it so he could get a clean cut on the head. He called me back in a couple of hours once it was done. From the decking process, lots of aluminum material gets into the nooks and crannies. I had to use an air compressor to remove most of the loose aluminum. I was able to install the cylinder head and now that car is running with no issues with leaking from the head gasket. Excellent work and a great price! I'd go back for more work to be done.