I needed a very dirty rental home cleaned at the last minute. They scheduled me right away. The…read moreteam came on time and worked hard. The house was spotless when they were done. I was very pleased with their service. I would hire them again.

A New View Cleaners did excellent job on cleaning my rental unit. I used their services three times…read moreso far and was very satisfied each time with their work. I would definitely call them up again next time when I need cleaning service.

3D PRINTING = SOLUTION FOR UNAVAILABLE PARTS?! I have a 12…read moreyear old Dirt Devil vacuum that needed a part that was no longer available either from Dirt Devil, or any vacuum parts website. So earlier this year, I spoke to Felicia at Smart Tech 3D Printing in Renton. I asked her what it would cost to print off one "air director" for my Dirt Devil "Reaction Fresh D2" Model 110006 vacuum cleaner, as it was missing one of its two air directors. Because they would have to reverse engineer the part using the air director I had, the cost of printing up just that one part was too high. So, I gave them the vacuum cleaner, as otherwise I would have had to scrap it as that part was not available anywhere. I was hoping they would print it up and use it as their own vacuum cleaner in the shop. IN THE "SPIRIT OF PIONEERING"! Long story short, lo and behold, I later spoke to Felicia about a month or two later, and found out that they indeed went ahead and 3-D printed the missing unavailable air director. Since 3d printing unavailable parts for old vacuum cleaners (or any other old thing that would easily otherwise get scrapped) is basically unheard of, and therefore in it's "pioneering days", I told her that I would like to make a YouTube video comparing performance of their 3-D printed part versus an original part. So Felicia let me take the vacuum home to make the comparison video (see "Smart Tech 3D Printing created unavailable part for my Dirt Devil"). The video shows that their 3-D printed air director (see photo) performs about the same as an original Dirt Devil air director. THERE IS BROAD MERIT FOR BRICK AND MORTAR! While I was there, I gave them another assignment to print a much smaller part for a Shark Navigator brush roll. Because this part was much smaller, and easier to design and print, they email invoiced me only $56.05 for the Navigator parts. Their invoice conveniently allowed me to pay via Apple Pay, which was nice! I can't help but think that my making the video re: the Dirt Devil part may have played a role. Anyway, another reason to hire Smart Tech 3D Printing is that they are a brick and mortar operation with a physical shop. Felicia tells me that most 3-D printing operations are over the Internet only. Smart Tech 3D Printing also operates over the Internet, but you also have the option of coming to their shop, now located (they just moved) at 138 S. 3rd Pl. in Renton WA, just across the street from McLendon hardware. Unfortunately, this option is getting rarer and rarer. BTW, street parking is easily available right in front of the shop.

Thrilled with the service! The insert of my grandmother's old pill box had long ago broken and…read morebeen thrown away. They were able to fabricate the missing piece to perfection! After many years of this pillbox sitting unused in a drawer, I'm now able to use it! Great job, and THANK YOU!

AMAZING job done by Graham. Just recently bought our first used boat and I know nothing about…read moreboat. Graham came to my home and did all the inspection and tune up for the first time on the engines of our Hewescraft Searunner. Taught me how to inspect and tips on how to maintain my engine. Thank you!! Will share our experiences with our friends for sure.

These guys are the only ones that will come to you. They do excellent work and explain all the work…read morethat they do. Their labor rate and travel fees are comparable to labor rates of boat shops that won't come to you. If you can get on these guys schedule, they will take care of your boat properly.

I can't even express to the fullest how grateful I am for the fine, friendly and professional…read moreservice I've received from Matthew, owner of Mobile Marine. After spending literally $$$$'s and getting ripped off by local repair shops, I have someone I trust...literally! We first met by chance when my boat wouldn't start. He fixed the problem in minutes and we were on the water soon after. I can't count the times that I've been stuck ON THE WATER and with a simple cell phone call, he's walked me through the problem and got the boat running again. Mobile service, any time...any where... by someone who's knowledgeable of cars and boats, who's been in the business for decades, AND that you can trusts? Where else can you find this? No where from my experience except with Matthew/Mobile Marine. Please trust me on this. Call Matthew. You can contact me on FB if you want more stories. Thank you, Matthew. -Gigi Minton Morrison

Incredible space to create music! Staff is very knowledgeable and accommodating. I'll be sure to…read moreuse them again for projects in the future! You gotta check this place out!

From the owner: Northwest Live Studios is a unique recording experience, featuring professionally treated spaces…read moreand high-end equipment. Visit our website to reserve recording time or contact me about end-to-end music production.

Eugene is very intelligent, patient and helpful person. He listened to all question, evaluated…read moreinformation and gave sound advice. Highly recommend

This is the 3rd year that I will be using Eugene Slutsky as my CPA for my taxes. Eugene is very…read morefriendly and helpful. He helps me think of all of my deductions and does my taxes right then while I am in his office. He has made tax time so much less stressful. His prices are also fair and he is very honest. I highly recommend him.

Great Shop! Awesome…read morecustomer service and top-notch quality! They installed a Steeda H- Pipe on my 2024 mustang and did an amazing job!

Top notch repair and service at a reasonable price ! I…read moreneeded of piece of my car's exhaust to be replaced on my Audi Q5. The team at Lifetime Muffler was able to weld a new stainless-steel piece the same day and at a very reasonable price. Thank you !!