Booms Welding are a great team who were a big help - Joel the owner, with Stephen and Brandon…read more We had an upright pellet smoker that needed repair and they fixed it up so well that we can't even see the repair... BUT we know that what did not work now does work! Thank you, Booms Welding!!! - - - We ordered a pellet smoker and the first one that was delivered was clearly damaged, seemingly before it was put in the box at the factory; the manufacturer sent us a replacement, and since the first one was too big to send back, they let us keep it. The smoker is upright, similar to a dorm or hotel refrigerator (but bigger), and the damage made it out-of-square... it was tilted just a bit, and that bit was just enough to prevent the shelves from being supported on all four corners... if we were to use it and to put meat on it to cook, a sizable amount would have made the shelf tilt and fall. We had met Joel before, searching for help on another home project; Joel was very friendly and helpful; while the part we needed repaired couldn't be repaired (we ultimately found an unexpected replacement...), Joel was straightforward... he clearly understood our ask and shared why he wanted to help but just couldn't. That impressed us. So when we needed the smoker repaired, we called Joel. He came to visit and to determine what to do; Joel suspected that welding a couple metal pieces inside the smoker would provide the support that the shelves needed. We just needed to get the smoker to their shop and their welding equipment. We took the smoker to Booms and dropped it off. Within an hour they had it repaired... they were able to straighten the frame and to then make two welds to hold it in the straightened position. The repair was done so well and so professionally that, when they showed us the two welds, which they painted, in the bright outside sunshine, we could barely the repairs... the smoker, with the welds, looked like brand new. And thus we had a smoker to share with a friend. Thank you, Joel, Stephen and Brandon!! - - - - - -

I've been waiting on a few dominos to fall in order to start the permit process to install some…read moreracks in my warehouse, and one of the later dominos that needed to drop was getting some cross bars cut down to size. Due to some dates being pushed up, I needed those bars to be cut down sooner rather than later. I emailed info@booms and had a response within the hour. They asked me if I wanted to bring the bars in or have them pick-up; I chose to deliver them directly to Booms and the gentlemen I spoke with said he should have them done by the end of the day. He notified me later that afternoon that they were done. I just picked the bars up and they look amazing. Exactly what I needed, just as specified. I am very pleased with the work performed by Booms. If you are looking for a professional, local, reliable, and quality metal fabricator - I would highly suggest Booms. I've already mentioned to Booms that I will be in contact about some future projects.

Great service and price! Easygoing and professional. Recommend to anyone in need of steel.read more

Very RUDE on the phone when I called back to inquire about an order I wanted to place. Waited 2…read moredays for them to get back with me with a price on about a $400 order. I went to their supplier and ordered it myself in minutes. A business is there to make money. I'm trying to give you my money and you don't apparently want it? I will not shop there for any of my future steel needs........ Good Luck! EDIT: It's now been a full week and they have still not got back with me on that price for the order I tried to place. Glad I moved on with my project.

I am thrilled with this company!!! I had tried to restore our leather couch with a DIY product and…read moretotally ruined the cushions. Terry came within a week of my calling and we have a new couch!!! He returned the next week to restore a 35 yo leather chair. The prices are very reasonable and I will forever recommend Fibrenew. LM

I had a small tear in my Tesla seat. The very nice man came to my work and worked with me. He saw…read morethat it was a very small tear and advised a new strategy that was also more cost friendly! He saw my initial request was a little much and helped guide me to the best solution, which I appreciated.

Eric and his team were fantastic! I needed a repair done after the storms came through Last Friday…read moreand I was in a time crunch because of an upcoming inspection this week to sell my house. Eric responded the same day, had me send some photos, sent me an estimate and they came out the next day and fixed it while I was at work. Excellent work, good price considering I needed help quickly and how busy all of the electrical contractors are this week and great customer service. I will recommend them to anyone needing work done and will use them again in the future! Thanks again Eric and team!

Couldn't be happier! Showed up when he said he would, didn't talk to me like I was an idiot,…read moreexplained what happened, and the price was reasonable. Furthermore, he introduced me to these cat-a-pillar spacer thingies that are super handy to have. Thank you!

Great service and the guys were very professional! They were honest and told me what I really…read moreneeded done right now and what could wait a while. Will do business again for sure.

I had powder works do some powder on a gas tank for me. Came out great. great prices. I'll…read moredefinitely be using these guys in the future for my hot rod projects. fast work! thanks!

Great Job Powderworks! I asked them to power coat two items for me…read more 1. A porch swing and it turned out great! 2. They power coated my rims for my F350 and everyone loves them! I will use them again. Thank you Again, I will be back if I need something else.

I've used Innovet three times now and am always very pleased with their work and the kindness of…read morethe people they send to do the work.

I have lived in my home for 35 years and when we purchased it, there weren't very many "code"…read morestandards to pass. Now in 2025, there are so so many. We are preparing to sell out home and I had a home inspection done prior to listing and the inspector took one look at the Sylvania electrical panel and flipped his lid. I was given Charlie McCarty's name from a construction contractor friend and called. He answered and scheduled to meet me at my home the next day. He not surveyed the electrical panel, but inspected each and every outlet in the house. He agreed with everything the home inspector stated in his assessment, and even added a few things that needed to be addressed before St Louis County sent someone for an Occupancy permit inspection. Charlie's computer died the night before his visit, but it did not stop him from meeting me at the agreed upon appointment time. He kept in touch with me as he got his system restored. He sent a crew to the house to handle all the work required after getting the necessary work permits. The proposal was fair (far less than I imagined) and the work was handled in swift fashion. there were a few minor things that got missed, but were corrected with just one phone call. I am not one to gush over people doing their job, but when a small business owner stands up to the job he bids, then stands behind the workmanship and takes full responsibility, I feel I need to let everyone know.

They were awesome and very nice! They quoted me a great price for the stuff that needed done. They…read moreremoved a reclining couch and loveseat for me the 1st time I hired them, which was extremely heavy. They loaded it up and got it down the large flight of stairs like it weighed nothing! They took great care in making sure they didn't hit walls or damage anything while trying to move it out. Had the same great experience when I hired them to do another haul away job. It would've taken me all day to do a job that took them 10mins. Highly recommend