I've only used them recently, I just learned about them. I'm working on a few older 1960-1970 Mopar…read morevehicles and this place is the only place that I have been able to find most of the parts I need. Not the biggest storefront in town, but if they don't have what you need they can order it. Small,friendly mom & pop type place with friendly people

They will steal your good parts and take your money. They kept calling me that my engine was going…read moreto be done so when I check with him said the engine's not in yet I said oh so you did source it out to somebody else. It's just a bunch of damn lies. It didn't care they had my money. It was a joke to them. Supposedly it was done but it would the engine would not spin because wrong bearings the whole thing was just biting against the crankshaft. A real punk attitude. But this is everybody in San Antonio now.

I first went to T&P in late 1993 because I needed an engine in my '67 Impala rebuilt but I wanted…read moreto learn and do the work myself without making expensive mistakes under the watchful eye of a guy who knows. I was referred to Barney and he let me use the corner of his shop over the course of a year in my spare time. Oh yeah, I learned a few (semi-expensive) lessons but he never gave me grief and helped me out and I sincerely appreciate that. He is definitely a standup guy. I moved to Austin a year later and haven't been back since but I have continued to refer the occasional person there if they live in the San Antonio area and need a machine shop. If you're a regular guy who wants to hotrod the engine in your old car, Barney can do it for you. If you walk in the shop you can tell just by looking at the equipment that they are serious about the work they do. It may look messy and sloppy with parts lying around, but while I was there over the course of the year I watched the other shop employees and they were meticulous about the work they did, always re-checking measurements for accuracy. A machine shop doesn't stay in business long if their work product is crap and they were always busy, even on Saturdays. Kinda tells you something, doesn't it? He knows how to build a motor (ask him about the 389 Poncho) and he won't sell you services you don't need for your intended use (you don't need a forged crank for a daily driver, etc). I'm doing another engine build now after 25 years for an El Camino (383 stroker) and trying to find a machine shop in Austin that I can trust as much as I trusted Barney. Unfortunately, he's just a bit too far away for me to haul everything down there. :-(

From the owner: Since 1974, T & P Automotive Machine Shop has built a reputation for getting to the bottom of any…read moreand all motor troubles. Barney, our owner, came into the shop in 1979, and he's been building relationships with customers and solving problems ever since. Whether you're looking for performance upgrades, engine balancing, or maintenance upkeep, just come by and we'll work with you to get the job done right the first time. Just one visit, and you'll see why our customers have continued to come back to us for over four decades.

This place is outstanding, from the owners to the employees. You're not just a customer, they…read moreactually make you to feel like you're family. Their work and business ethic is to be commended. The owners as a whole are just good people. If I ever need to have a semi block worked on again, this will be my very first call.

I have to say I am very impressed with this shop. They offer world class machining services and…read moreexpertise on a wide array of engines, something that San Antonio needs. I recently took a Pontiac 400 block to them after the original cast crank snapped. While the damage to the main journals was too great to save the block I know they did everything they could to save it. I left with a sense of peace that if the block could not be saved by them, then no one could. I am thankful for their efforts and knowledge moving forward.

Groff is the real deal in a world of "fly by night" automotive repair shops. The place is not much…read moreto the eye but they are pros if you need your engine rebuilt. They have been working on engines (and racing cars) longer than I have been alive. They don't do brakes, maintenance etc. Just machine work on engines you are rebuilding and can locate parts that you need in the effort. They help resurrect my Jeep Grand Cherokee.

Hands down best machine shop in San Antonio been coming to them for years and I've never had any…read moreproblems! Highly recommend!

These mechanics Just lie and lie, and that's probably not as good mechanics as they advertise. they…read morehave had my car for 4 months and just lie every change they get and I'm sick of it! Somebody getting paid a visit and lie to me AGAIN! I'm gonna show you want lying gets you! Piece of shit. I would not recommend this business for nothing in my life. These aren't knowledgeable mechanics and has had my car for 4 months now. Tomorrow lie to my face, I'll be waiting on it, I'm break your face. My car better be out back together and don't ever touch my car again.

Job Title: Expert Engine Builder - 40 years experience…read more Previous Forman from other shops in Austin Texas Previous Owner of Jim's Motor Works Auto Machine Shop in Cedar Creek, Bastrop, Texas New employee who is an expert, and very knowledgeable, and experienced, knows his job well, his been doing his job for 40 years, he just happened to be in Danny's business. He recently started working at the end of 2025 to now 2026. He believes in Quality Product that he produces, no shortcuts! He used to have his own shop in Cedar Creek at Bastrop called "Jim's Motor Works Auto Machine Shop" he is open minded about anything that has got to do with repairing vehicles, he did an engine overhaul to a 1971 Mustang, and and others. Open minded, great team, excellent service, great people, and great asking for advice especially when a person knows what is doing! Danny is very blessed to have, Jim.

I explained to them I was not a mechanic and this was my first time doing such a project. I was…read morehoping to be counseled and guided. Took bare block in to get bored and surfaced. Told them I was waiting for bore diameter to order new performance pistons. "Danny" said "we can order them for you and save you some bucks". Great...but I was NOT consulted on pistons selected. Piston parts numbers showed $200 for set of Summit pistons that was marked up $100 on bill. Crank was to be polished but was told new crank would be cheaper. Bill still showed crank polish for $300. Was told it was for my benefit to avoid tax. I was not advised on crank selection. My short block turned into a long block. Was told to bring in my heads for installation. Purchased them already surfaced. Guess who got charged $300 per head to be surfaced on top of valve job for $250...not 1 call for authorization. I found this when I went in days before pick up. A $900 estimate ended up at $3000. Mission Auto Parts and Machine Shop should be last place anyone should go.

JB Machine came through for me and saved the day! I needed some metal electric panel cover plates…read morefor some old panels that were no longer available. JB Machine was able to custom-make these complex pieces using an original part as a template. They were delivered on time, as promised, and with a minimum of hassle. I will definitely use JB Machine again if I need metal fabrication work.

Jared lacked communication, was unable to complete the project on his promised deadline, and was…read moreunable to properly follow spec sheets and order instructions. Very unprofessional and I had to ask for my money back to finally get my order completed. A 4 week lead time turned into 15 weeks for him to complete the order. In fact, he left them outside of his shop with the door locked for me to pick them up during business hours. I don't recommend this place to anybody, especially if you're dealing with industrial equipment. Joe's Machine off of Rigsby Avenue is much better and good folks.

I would Highly recommend them... Efrain is very friendly, hardworking, and reliable. He is a good…read morewelder ...... I went to welding school with him.

From the owner: 210 Metal Works specializes in welding/fabricating, fences, repairs, ranch work, custom designs,…read morecarport, etc. We offer discounts to senior citizens/ veterans. We pride ourselves on quality craftsmanship, reliable service, and fair pricing. Whether you need a small repair or a custom build, 210 Metal Works is here to bring your project to life. Free quotes. Commercial HVAC & mechanical services.