Joe at El Camino Machine and Welding makes my projects a lot easier, by adding his knowledge and…read moreexpertise. I have called him over 10 times and he always has the correct material ready when promised. Joe is the Man!!! The whole team is great at El Camino M&W.

The guys at El Camino M&W were quick to help me solve a length problem I had with my Rogue squat…read morerack. I needed a foot taken off and they got right to it as soon as I showed up. I was out of there in less than 30 min. Couldn't recommend them more!

Affordable, timely communication and great quality work. From measuring, dry fit and final…read moreinstallation, Brandon kept us informed of progress or delays.

Bp Ironworks helped us update our home by removing dated and ornate floral designs on our interior…read moreand exterior iron railings. Brandon and Joshua are very detailed and careful in their work, and their team members Dave and Will also have a great attitude. Everyone worked diligently and I'm pleased with the end results. I highly recommend them!

I rarely post on Yelp, but in this case, I feel compelled to write a review based on my experience…read morewith this business. I contacted this company initially to assist with a transfer of property, which is a service that they claim to offer. I was told that I needed to speak with George. Called three four times over two weeks leaving messages for him with the lady who answers the phone, where I was told that he would call me back every time that I called. It never happened. On my 5th call, he happened to be in the office so I talked to him about what I was trying to accomplish. He told me that he would need to get an answer based on my request and get back to me. After two weeks and no return call, I began calling again. Three more calls and they still refused to call me back. Was even promised by Wendy that Greg or his father would call me on Tuesday, 9/8, which never happened. I called them again this morning (Wednesday, 9/9). The lady who answered the phone said "there is nothing that we can do for you". It is obvious that they didn't even research my question, nor did anyone have the decency to call me back, after multiple promises that someone would. In fact, I was given the impression that I was bothering them for following up so many times after being promised a call back. I do not recommend this business to anyone based on my experience. This situation could have been handled so much better in so many ways. They obviously don't care about their customers, like most businesses do...

Mike and Chris did my gates design build with permits , no work from me great serviceread more

This company took my $5000 deposit in Sept 2025 for a custom wrought iron gate and they have not…read moredelivered anything in over 90 days (now 120 days). At the time their license was active. However as of October it has expired and has not been renewed according to the CSLB. Yes, I have had heated conversations with Michael Mayer the owner since he is incapable of giving me any information or schedule about delivery. Basic tasks he needs to set up get delayed because of his inept project management. I gave him chances to remedy the situation and provide a schedule and he is no longer in contact. I've moved on to another vendor. The service in comparison is night and day. Please save yourself a lot of grief. Not sure how I'm going to get my money back. Stay clear!

Great service received from this company. Others wanted to replace a furnace for 10k plus. These…read moreguys fixed the issue in under 10 minutes. Will definitely use again and recommend their services to others in need.

Had a dead thermostat and a VERY old furnace (20+ years). Got bids from several HVAC companies…read more Felipe and his associate came out and installed the smart thermostat I had already purchased. He offered to do a service on the old furnace or give me a quote for a completely new and upgraded one. I went with the new one. He installed a Bryant heater that was more appropriate for our sized house than the one we had been using ("Should save you about 25% in heating costs.") Additionally, he fabricated an access panel in the unit to enable us to change out the filters much more easily. All included in his very fair price. He was able to come back and install it a few days earlier than originally planned . Arrived on time and finished early. I definitely recommend Felipe and his service! 10/10

The manager Jeff give me great service and was very helpful. I will continue to shop at Barnes…read moreWelding Supply.

Im not typically inclined to write a Yelp review but this one deserves 5 stars and then some. I've…read moreused Barnes for over a year for my Nitrogen tanks. The service from Jeff in particular is exemplary. He always shows up with the best attitude and helps work with us from equipment and customer service standpoint This kind of old school service (sadly) you don't see much these days. Great Job Barnes! Keep up the good work !

THEY S U C K! At best they were having an epic…read morebad day. At worst they are completely disorganized and/or incompetent If you need machine work done find anyone else I'd give 0 stars if i could. But then........ I'm biased I needed bearings and races pressed into a fitting. I supply all parts. Them - "You'll have it tomorrow" Me - "sounds great. Oh yeah, this arbor here - this one right here - it's critical that it projects enough so that the flange doesn't rub on the fitting." Them - "Got it" (Scribbles a sketch) Me, tomorrow - "Hello, is it done?" Them - "maybe around 4:30, if not, then by the morning." Me - "not a problem" Me. the next morning - "is it done?" Them - "The grease fitting broke. We're drilling and tapping and replacing it right now. Have it done by 1:00p" (Grease fitting not part of the original plan) Them 1:00p - "part's ready come pick it up" Me (there) - "here to pick up my part" Them - "Do you have a spacer? We pressed the arbor too far into the bearings. It rubs, but if you have a spacer it will work." Me - "SPACER!?!? No!! There's no spacer" Them - "No problem. We'll just press it back through. Another 20 minutes" Me (20 min later and not happy) "Well, I'm back" Them - "That's $100" Me - "$100!?!? You quoted me $50-$70" Them - "Well we had trouble with it. the $70 was if it was easy" Me (to myself - 'well it's done, I can get on with my life') - "Here's my card" Them - " It's $100 cash. It's $140 on the card" Me -"What!!!" Them - "There's an ATM down the street" Me (to the ATM and back. Now pissed) A quick exchange of money and parts and I'm gone. I don't even want to talk to them anymore. I'm DONE! Get home, start laying parts out for reassembly........... THEY PUT IT TOGETHER B A C K W A R D S !!!!!!!!! Me (on the phone) - "You guys are a day and a half late. You charged me $30 more than I was quoted. And it's Fucking WRONG (for the 3rd time)" Them - "Bring it back we'll fix it" Me (14 miles and 25 minutes later) "You did it backwards." Them - "We'll give you a call when it's done" Me - WHAT? HOW LONG IS THAT GONNA BE Them (no eye contact, shuffling off to confer w/ coworker) (5 min later) - "About an Hour. We'll call you" Me (53 minutes later) - "...........no...........words........" Them (nothing)

I have a small company that makes machinery parts. I've bought stainless from these guys a couple…read moreof times, they sell for a reasonable price. I noticed they have quite a bit of blue UHMW also, which is hard to get. They cut my material the same day. I was very satisfied.