I came here trying to support my local business. When dropping the bars off I spoke with jeff who…read morewas in the office and told him what I wanted for paint and flake for my bars. Jeff told me that Adam would be contacting my to get the color and flake desire. I never got a call nore and email. After waiting a week n half I was told they were ready for pickup. When I went to pickup the bars they were painted incorrect paint color/ combo. Wasn't painted like I asked for. I asked for gloss black and a little bronze and red flake. They basically painted the bars black with a shit tone of gold flake and with very little red flake. When asked why it was painted this color. I was told by jeff that I asked for it that way. When I specifically asked for gloss black and a little bit of flake in the paint to make it pop. After being basically yelled at by jeff saying that's what I ordered, I was told to take my bars and get out. To which I paid for the incorrect paint job and left due to the fact they wouldn't repaint them like I asked. Stating that they wouldn't eat the bill for repainting my stuff. I just wanted to get what I asked and paid for NOW I'm forced to take it to another powder coating place or just leave it. Seriously Poor communication from the staff. Which lead to incorrect painting to be done. "Isn't that what you do"? "Isn't that what this place is for"? I Wouldn't recommend anyone come to this place. There are other powder coating places that are WAY MORE PROFESSIONAL than this. PLUS, you won't have to yelled/talked at by JEFF zero stars

Hands down, the best around! I've also had my bumpers, skids, sliders and rack done here. BK62 is…read morean awesome hammered black finish that's darn near bulletproof.

I have to give a big shout out to North Shore Maintenance for sandblasting and painting my trailer…read more It turned out great. Looks great, was on budget. Took a little longer than expected but in the end worked out great. Would not hesitate to recommend.

From the owner: We've been providing sandblasting, painting, coating and surface preparation services for more than…read more25 years. Industry experts since 1994, we have the experience and know-how to complete any project, no matter its size.

I am restoring a 1977 Pontiac Trans Am and had JB Sandblasters media blast the front sub frame,…read moreunderside of the floor boards, and the trunk area. The results were stunning - every square inch was blasted clean, saving me countless hours of doing it by hand. They were even able to remove the old factory applied undercoating. The car went in first thing in the morning, and it was finished on the same day. The price was reasonable - $280.00 after tax. Overall, i'm very happy with the work that was performed, and I will be back with additional parts in the future.

Good work but not Great! Took a mower deck in to see JB…read moreSandblastings work. Had to call to determine completion. Expected clean metal but receive partial work. Was told the metal was blooming. Maybe rust but not paint. Recommendations: Hold a higher standard, check your work and only release a product your proud of. Didn't receive a receipt and manager was quick to put cash straight to his pocket vice the register. Questionable service and business practice.

Great quality work and very good employees. I will definitely be taking future work to them!read more

Had a few auto body parts coated at PV, great place to have it done. Easy in and out, done in a…read moretimely manner and the quality was amazing. Super easy to find and really easy to work with.

They did an awesome job on the 100 year old baseboard registers from my house (that had so many…read morelayers of old paint they barely opened and closed). They work so smooth now and look brand new.

I brought my weird and surely annoying 1960's playground equipment project to Seattle Powder Coat…read morefor a heavy sandblast and industrial green coat. The super shop manager and the boys hooked it up! They all took the time to hear me through and the finished product exceeded my expectations. I'm not sure what else one could want from a shop?!

Negative stars if I could... I wanted to share my very bad experience with this business (now…read morecalled Aerotech Manufacturing - Blasting). I had a set of four wheels dropped off for them to sandblast. When I first spoke to Ken over the phone for a quote, I specifically ask "How much to media blast a set of four brand new 20 inch wheels and have it ready for powder coating at another shop?" His response was "I can do them for $200." Then when it came time to pick them up, the same Ken then said the quote was for each wheel and claims he never said it was for all of them. He insisted that they had put 4.5 hours into this job and proceeded to charge me $655.20. Now even if I misheard (which I know I didn't because I wrote it down)... are they telling me their quote for simply sandblasting a set of four wheels is $800???!!! That is insane!!! Why would I agree to that??? Why would anyone???? The wheels are nothing special; they are brand new, lightly painted, split 5 spoke wheels... not chrome, not powder coated or anything crazy. They did not need any repairs or removing any wheel weights or anything like that. Every other place I called quoted me about an hour labor to sand blast all four wheels! Which works out to be around $200 or less depending on shop rates. I made the mistake of being too trustworthy and not getting anything in writing before work was done. When I asked to speak to the owner, I had the displeasure of speaking to the owner's wife, Lynee... which accomplished nothing to resolve our dispute. She even tried to bribe me by offering a small "discount" in exchange for not posting negative reviews online... no thanks. Anyways, I hope this serves as a warning for everyone to stay away... or at least use them at your own risk. Everyone's experience with them can be different. You may have the best experience with them... but there is no doubt I was "selected" for their "special" rate.

I would NEVER Recommend taking your car parts or wheels here…read more Not only did Alternative Blasters Damage my 2800 dollar wheels. They sand blasted directly over decals leaving imprints. I asked for mild compensation of 100-60 dollars for the damage to pay for them to get fixed and was denied. On top of this negligence they also told me they will disassemble my valve stems and return them in the order received. I was returned "some" Valve stems that where useless because they loss 3 out of the 4 seals. Let alone 1 seal was left in my wheels so once my powder coater coated it caused chipping from the removal of the part they told me they had "completely disassembled". The valve stems lost where not cheap and cost me over 120.00 to replace. I was quoted 35.00 to 40.00 dollars per wheel and upon pick up was charged 46.00 per wheel. I highly recommend seeking another blasting shop if your bringing in show quality parts or are looking for professional service.

Very poor customer service. On May 30,2017 I took my car seat frame in to get it sandblasted. Tom…read moretold me it would be ready in a week. A week went by and I didn't hear back from him so I called him. When Tom answered the phone he asked me what color I wanted it painted. I told him I didn't need him to paint it only sandblasted and he then told me it was going to take him another week! I was not happy with him delaying my work for 2 weeks and his answer was "it is what it is and if you don't like it, come and get your stuff " in a very rude way. I didn't want to argue with him so I went to pick up my car seat frame that did not get worked on. I definitely do NOT recommend this place after my awful experience.

Never responded to the work request. Then gave us an extremely high price and telling us it would…read moreonly be 250 over the phone. We emailed and called several times he seem to disappear and never responded. We had several days worth of work and he just vanished. I would not recommend.

These guys are great to work with. They bead blasted the paint off our front porch and steps in a…read morecouple of hours and the underlying concrete now looks like it was just poured. Couldn't recommend them more highly! :-) Tom Boyd