I waited six months to write this review to make sure everything worked fine--and I'm happy to say…read moreit does! I had an emergency water leak, and SVA Plumbing responded quickly. The issue wasn't an easy fix; they had to cut drywall and replace some pipes, but they handled everything smoothly and professionally. The price was fair, and the quality of work was excellent. I was so impressed that I hired them again for my cabin, where I needed to move a sink to a different location. Once again, the job was done efficiently and with great attention to detail. Highly recommend SVA Plumbing for their expertise, professionalism, and fair pricing!

I live in Redmond WA, and my appt had a kitchen sink water leak. Our HOA called SVA plumbing…read moreservice to fix the leak. HOA didn't tell me any info about the plumbing company and when the guy came I didn't ask how much it is because I trusted the HOA and assumed the cost would be reasonable. The job was done in 70 minutes. The next day I got an invoice $1,254.20. The job was simple, just fix the kitchen sink water leak without replacing anything.

Cal and his team did what Les Schwab Tires couldn't after 2 attempts. That was fix the alignment…read moreon my vehicle. I took my car to Schwab and they told me they had aligned my tires. I believed them until I took my car on the road and it still pulled to the right. I took it back and was told that they would align my vehicle correctly THIS time. They did NOT, even though they gave me a computer generated printout to show that the wheels were aligned.. I called Extreme and spoke to Cal personally. Unfortunately I had to wait 3 weeks for an appointment but some of the best things in life are worth waiting for. Cal's people checked out my alignment and thought they had fixed the issue but when they took it on a test drive it still pulled to the right. So they delved deeper into the problem and discovered that a rear wheel was pushing the back end of the car to the left meaning I had to turn the front wheels to the right to correct this. Perhaps Schwab does not test drive vehicles after alignment but Cal and his team did and I am grateful for that. AND the Price Was Right. You may have to wait to be seen but trust me ... it is worth it.

Don't bring your vehicle here. While "fixing" my vehicle they turned off the driver information…read moredisplay and said they couldn't turn it back on without the factory radio. They were tasked with programming a new fuse box, but ran the wrong code thus turning off my info display. The steering wheel radio controls stopped working as well. Some how this became my issue to resolve after they caused the problem.Then I brought it back for another repair, I should have known better. This time they shorted my vehicle interface out (this connects factory controls/ gauges with aftermarket radios) , one of my stereo amplifies was fried and I still haven't been able to turn the microphone for blue tooth back on. It's most likely fried as well. I also found the speaker terminals on my subwoofer box bent and tweaked. The owner is shady and refused to fix the issues without me doing a dog and pony show, told me to get a letter from Car Toys saying it was his shops fault. Basically calling me a liar. This has cost me well over $1000 to fix and I'm not done yet. I still haven't got the info display back on. All of this after my company dropped well over 60k with them in the last year. Never again will we use this shop. You shouldn't either. Thief of an owner, he won't stand behind his shops work. I should sue, just on principle.

The Welderbeast team was so easy to work with, I'd recommend them to anyone. Great communication,…read moreand even better craftsmanship, quality, and price.

I showed Al some small metal parts that needed minor modifications, and given the scope of the…read moreproject he offered to do them for me no charge in about 5 minutes rather than charge me 1 hour at his shop rate. After he quoted me his shop rate, he immediately followed that up with "I like to help", and that is exactly what he did! He refused all offers of money from me as well! I can't promise you'll get this same offer for your project, but if I ever need anything else machined he will be my first stop! I could not recommend more highly!

Had Alan of Getter Going Machine Works do some milling in some small billet aluminum parts for a…read morecar I am building. He end up machining me some brand new pieces as the parts I brought ending up not working out. Really appreciated that. Alan is communicative and let me know what was happening. Was also nice to chat with him about his awesome hot rods and talk cars for a bit. Will definitely be going back in the future to have more custom things made.

I wish yelp had 10 stars, I would award it to these guys. I have been looking for a shop with good…read moreservice and quality for small jobs for my house. I've had steel shops overcharge, even had one fake hours across the canal in Ballard. I found these guys by chance to cut a steel piece that another shop couldn't do on a random walk in basis and they didn't even want to charge me for the work, just said to remember them next time. I sure will remember them. They were friendly, they showed me around because I was curious about some of the equipment, then when I went to wait, the whole office asked if I needed any help, and so I just donated money to their happy hour fund because I was so impressed. I wouldn't go anywhere else.

I have worked on several projects with PacFab. They have always delivered on time and below budget…read moreon every project. Their attention to detail is second to none. It starts with their engineers and the fact that they employ some of the best metal fabricators in the PNW. Very professional... I just can't say enough.

There are so many things to love about Columbia City, and the Southeast Seattle Tool Library is…read morejust one of them. I was replacing some parts on my car and needed a socket wrench for a quick five minute job. It didn't make sense to buy one if I could avoid it. This tool library saved the day. I showed up on Saturday morning and got the wrench I needed in no time flat. The tool was in amazing condition, and I was happy to make a small donation to keep things going. The people that run the tool library are also incredibly nice. Thank you for doing this!

We have been members for a couple of years and I just want to echo what everyone else has written…read more The tools are stellar and the volunteers are fabulous. I have not one negative thing to say. I thought I'd add that they have been wonderful to roll with all the punches that 2020 has thrown. Covid, wildfires etc., they've still found a way to get us access to tools safely when it would be so much easier to just shut down. Thank you!!! The most productive thing that has come out of this quarantine for us (other than our newborn :) is finally building and installing closet shelves and fixing up our yard before the baby arrived. Couldn't have gotten through the nesting process or kept as sane as possible without the tool library.

Great resource in the Seattle area if you're in need of a forklift operator. From someone who has…read morelimited experience with forklifts, this business really saved me a lot of stress in a pinch. Also handled my very fragile pallets of ceramics with lots of care. Nik is great to work with.

Jeremey and Will were incredible to work with! I needed help with my AC unit and they were able to…read moreprovide support quickly and helped walk me through everything I needed to do. 10/10 would recommend them and use them again for my next project.

Huge shoutout to Greg, Jeremy, and Amy!…read more They created beautiful weathering steel planter walls for us, staying exactly on budget and on schedule. The best part of the experience was their flexibility. When I thought I'd made a measurement error, they were ready to fabricate a fix that same day without hesitation. It's rare to find a vendor so dedicated to problem-solving. Ballard Sheet Metal Works is now our go-to for custom metal design!