I recently purchased an HKS muffler and I have a different exhaust tip I wanted to put on. This…read morewould require cutting and welding. After looking around I decided to call C&H, originally Ronnie picked up on Monday morning and mentioned that all the welders were out on job sites and to call back Wednesday morning. When I called in Wednesday morning Roger picked up and after I briefly explained what I was looking for he said to visit the shop and bring the muffler and tip. Roger is very nice and professional along with everyone else at C&H. He told me that the muffler cut and weld would be done by the next morning and so I left my contact info and left. I get a call about 4 hours later saying that the work is done so I drove over and I am impressed with the work. The cut and welds are clean, no mess, no scratches, no dings, the new swapped tip is aligned perfectly. The guys at C&H also wrapped my muffler to protect the finish from any scratches or dings! Great service, great price, fast turn around time! (It is still Wednesday as I write this review) Overall I highly recommend C&H if you're looking for metal fabrication work! Talk to them if you have any questions and they'll help you out Thanks Roger and everyone at C&H!

Since my last review of smaller projects/repairs (experience was good), I've brought them more…read morebusiness, thousands dollars' worth of business. Everything is good when they are TAKING your money and business. But, once it goes the opposite way (refund), Roger gets NASTY -- I didn't see this side of him before, always with a smile because while taking money in. I brought some parts to be replicated; 1" shaft with the center with a 2" diameter cylinder with 1" flanged bearings. I was suggested another way to "make" the part that would make everything more "simplified" for me, okay, sure. I wasn't sure what he meant, but after minutes of trying to explain to me, I just went with whatever Roger suggested since he would know better about the mechanics of machine parts, etc., He just told me that I would have to source the bearings myself, which is what I did. He asked me if the diameter could be smaller and I said yes. So I trusted his word and went with it. When I picked up the item, he said, "If it doesn't work out, just bring it back". The thing is, I complained after because what he sold me for almost $400, was NOT SOMETHING HE "MADE". It was a part that could be bought online (~16", 1" shaft with 2 shaft collars), which can be found on Amazon for $35 (shaft) + $10 (2 collars). He then said that he bought it McMasterCarr, then quickly changed his wording to "WE MADE IT". So which is it? (I will never know, but my assumption is he got it at McMasterCarr, as he first stated, or another retailer). Then he said, "I'M NOT HERE TO SAVE YOU MONEY." JUST WOW!! It's my fault for not understanding what he was trying to sell me, but it's obvious my lack of knowledge was taken advantage of--I let Roger do what he does. I believe there is a big difference between MAKING something and up charging for labor, etc., vs. buying $40 dollars worth of parts and CHARGING 9X-10X more!! Especially, to someone (me) whom he kept calling "friend" after all the visits/business I gave him. When he did this "work", I also dropped off a small part that had a broken screw stuck in it. He said it was FREE OF CHARGE to extract it. Anyway, when he agreed to refund me for the $400 (16" piece of 1" shaft), BUT he charged me $85 for the screw extraction that he told me that was free! From ~$400 refund, I received $85 less. This costs him nothing (almost literally) to fix easily. $85 FOR A SCREW EXTRACTION--HIGHWAY ROBBERY!!!! He gave it back to me, with a new screw, "I also gave you a screw". (Oh, gee, Thanks, I guess.)--But I didn't need that screw as I have 100's (if not 1000's) of these screws for my parts -- so he acted like giving me this screw in place of the broken one is a huge hook up, after I spent thousands and thousands of dollars here. I paid for this with my personal credit card, but he made out the refund check to the company I work for. So I asked him if he could cut the check out in my name since I'm the one who paid for it. He said, "just give it to your company and have them pay you." I explained to him that I can't do that because of accounting issues, etc. He got mad and he snatched the check out of my hand with an attitude. This right was the last straw. I was still going to give him more business (which I even told him, thanks for the refund and making this right, I'll be back). He told me, "I DONT CARE ABOUT MAKING THINGS RIGHT AND WHAT YOU THINK, I DONT NEED TO RESTORE FAITH IN YOU OR YOUR COMPANY". Okay, fine. ^Great attitude, perfect way to lose business after the fact that I stated that I hope this one issue won't affect future business and that I would be bringing more business. Roger shouldn't be interacting with customers on the front line if that's his attitude and represents your company. On the other hand, Alex is very polite. While Roger was deflecting the situation, blaming it on me, arguing who said what, this and that. Alex is the one who apologized on behalf of C&H Metal with a smile on his face, while Roger was steaming mad at the situation -- just the way he snatched the check out of my hand says it all. ALEX IS THE REAL MVP at C&H Metal, too bad he's not at top management, because management up top is clearly lacking customer service skills and lacking know-how to keep the customer acquisition costs low. I can bet they'll see this review and Google what CAC is because they don't know. Or maybe, they are making so much money, they don't care how they lose a few customers the way they do. Roger (mgmt) just knows how to take money with a smile on their face until you complain about something, then it gets nasty. This is the type of business you don't want to give business to. If you do give business to them, good luck. Hopefully, it's a short stint because eventually an issue will arise, and Roger has a short fuse, and you may not like the way he handles it. This experience was a blessing in disguise because I found a better and CHEAPER shop to do work for me.

I am very happy with Metal Design Works. Toros was a pleasure to work with. We live in the San…read moreFernando Valley and he came down quickly to check things out and measure for the project. I have a very specific style and he was able to create a stair rail system based on my inspiration photos. Toros was great at communicating (even when I was on vacation and had very limited cell service), gave perfect recommendations, and answered all of my questions. The rail was made quickly for our timeline and installed in just a few hours. Installation day went smoothly and his staff were great! Very professional and took all the care necessary. We are absolutely thrilled by the final product and the way it fits perfectly in our stairway. It's exactly what I wanted and pictured. I can't wait to show all our friends and family. I highly recommend Toros and his work. The price was also excellent and he worked within our budget.

I worked with Jack and Toros on five custom metal railings for second story balconies. They were…read morecommitted to get the job done and willing to help every step of the way. The railings were fabricated perfectly and installation was efficient. Communication was top notch. Highly recommend and would hire again in a heart beat. Great family business.

Great work, 2 solid quality doors. He was able to work around my schedule and situation as a…read moresingle completely blind father.

So I want to begin this review by saying Jony is a straight up good dude. I recently bought my…read morefirst home and wanted to make it look nice. Wanted to start off with the door as it's the first thing you see when entering. The original door was just that, bland. So I started to look online to see if there were anyone's I liked but none came close. I actually heard about Jony through a friend who had his gate fixed by him. He's a really great welder from what I saw. So I pitched him a door I wanted and this guy made it from scratch. I couldn't be anymore happier with the results. I would highly recommend his work to anyone looking for a top notch welder/maker. Works in a timely fashion and worry free.

AWESOME WELDING…read more Fixed our sad very old gate quickly. It's stronger and better than ever. Our home was built in 1930, so we are glad to have t working perfectly. This place does good, solid work, and they are friendly. Deeply appreciated the stellar welding!

Joe was great! My apartment had a wrought iron handrail that rusted and broke apart at the base…read more Joe came out and gave me a very reasonable estimate. He was easy to communicate with, timely and did a wonderful job repairing both handrails for my apartment complex.

I had stair railings fabricated and installed by Ramon and his crew in late 2025 as part of a full…read morehome renovation. Ramon specifically advised that the new railings would be built to meet current residential code requirements and would be taller than the originals. The pricing was reasonable, and based on that guidance, we moved forward. At final inspection, the railings failed. They were built approximately 1 inch below the required height, which required additional work on my end to bring them into compliance. I reached out multiple times to Ramon and his shop lead, Mario, to address the issue, but received no response. I ultimately had to resolve the problem myself to pass inspection. Separately, the quality of the wood caps was below expectations. Scratches upon install and a very poor job staining the wood. Based on my experience, I would not recommend using this company.

Here is the update. I took these crooks to small claims court. We won the judgment. Ramon was…read moresilent and allowed his fabricator Mario to dig himself deep. It was hard to get Ramone, served because he hides. He had his family at their home say he didn't live there. That is rhe kind of human,If you want to call him that, that he is. Of course. Now that I've presented him with the judgment. He's not answering calls... But then again that's his m o. All I can say, I hope you guys do your due diligence. This guy and his fabricator are conartist.

Back in October 2021, I was very fortunate to have found Lango Welding on yelp. Andres, the owner,…read moreresponded to me promptly. The next day he arrived at my house to discuss the projects, do the measurements, and give me a quote. As of today, Andres has done a total of 3 projects for me. I wanted metal side gates for both sides of my house. One is to replace the old and weathered wooden gate, and the other one is to add extra security to the side of my house where the bedroom windows are located. I showed Andres the design I wanted, and he was able to transform my vision into reality. The turnaround time was only two weeks. Today, more than four years after Andres' team had completed the work, the side gates are still looking fantastic!! We did black powder coating on all 3 projects. This process truly helps the gates to look as good as new for many years to come. I am extremely pleased with what Andres and his team have delivered. Andres' son came to my house to do the welding and installations. He's a true professional. He was able to complete the projects in a timely manner. The third project was a custom design security door for the back of my house. I sent Andres the photo of what I wanted, and again his team was able to create what I asked for. I absolutely love love love this door. Even after 4 years, it's still looking perfect!! This project took a lot longer, over 2.5 months to complete. Keep in mind that this was during the pandemic in January 2022. In the end, I was truly satisfied with the results, so it was definitely worth all the wait. I hope to hire Andres and his team to do more projects for me in the near future. I greatly respect his magnificent work and craftsmanship. He's got an eye for detail!!

Since our gate install, I've had Andres and his team create a matching custom dog door security…read moredoor for my house and do a design on the top of my wall. My house looks amazing. Andres is wonderful to work with.

Nice guys, busy shop, quality looks good. They do welding and metal fabrication. They specialize in…read morefood service like making custom taco carts and grills.

JRC wrought iron created two very sturdy, attractive railings for my front and back steps. I highly…read morerecommend this company.

In mid-April, I contacted 6 metal fabricators requesting a custom iron double gate to replace a…read more20-year-old dilapidated wooden gate. JRC's Jesse promptly arrived, carefully measured the space, and took many notes on my design. JRC's final estimate was very detailed, and the cost was exactly what I had expected between the other estimates I'd received. I put down 50%, and Jesse said it should take 4-6 weeks. Everything was going well until I realized it was the beginning of June and I hadn't heard from Jesse in 8 weeks. After my calls went unreturned, I emailed JRC's Director of Operations, Stephanie, who replied, "Jesse said he and one of our welders are working on your order, and you can expect completion in about a week. By Monday, we should have a better scope of exact install dates." After still not hearing from Jesse by the end of June, I reached out to Stephanie again for an update, who reported, "Our welder said he expects himself to be done tomorrow. We will be sending it to be powder coated, which just takes a day or 2." Another 3 weeks later in mid-July, with no installation date scheduled, I got a last-minute call explaining that they just had a cancellation and that they could install it today if I was available. Arnie arrived within the spontaneously scheduled window and got right to work installing the gate and meticulously making sure it was exactly right. He even hauled away the heavy old gate, which was very much appreciated. In the end, I'm very happy with the final build and installation, but JRC's communication leaves much room for improvement. I'd reached out to Jesse on a few occasions, and it took weeks to get a single response. A simple message that things were moving slower than expected or that it was going to take 12 weeks instead of 4-6 would have gone a long way. Also, having an actual installation date versus a last-minute cancellation that I could fill for them would have improved the overall process. Thankfully, Arnie left a very strong and professional last impression, as did Stephanie for her prompt and repeated replies. I only wish I didn't have to manage the project after all the missed milestones and awkward radio silences.

Last year I was scrambling around town trying to match a "control sample finish" of a particular…read morestainless steel in a #6 finish. With the clock ticking and trying to meet a deadline that was approaching, I found myself racing with time. After being turned away from so many local fabricators, my last draw was Architectural Aluminum Cladding, Inc. I had left that morning to pursue other possible leads and AACI would be my last stop for the day. That morning making last minute appointments, my conversation with Jenny Peng who is the office manager/estimator/design consultant and many other titles left me with hope with whom I had no prior contact or business ties. Naturally my day concluded in S. El Monte when I walked in the front office and met with Jenny. I presented my plan details and made Jenny aware of our "high profile client" expectations. She replied with her soft voice "no problem, we can do this for you". That was a major relief as a construction project manager to hear, it was comforting. Jenny brought out her floor production manager and also got involved in making sure everything shown can be made. Basically it involved taking flat sheets of stainless and breaking with 90 degree corners, 45 degree miters and ultimately applying a hand custom finish to create a intricate #6 finish. To the average person, you really can't see the difference unless you're a designer, architect or metallurgist. Our business continued the next day sending over my design plans electronically and signing off to proceed with fabrication. Drafted a deposit payment to commence work immediately. Terms of purchase order, net 30 days. Our client even offered to pay for Saturday labor to ACCI to help expedite completion. Our first delivery by AACI arrived on Monday with 2nd delivery on Wednesday as promised. No delays or hiccups. Material arrived with extra protection including bubble wrap. They went the extra effort to deliver sensitive material and not damage anything in transit. It's not a good scenario when you find yourself short on time and material is arriving damaged. Everybody loves a happy ending when the front doors of our client store opened up for business at 10am, Friday. I currently find myself with the same client and didn't think twice about reaching out to Jenny Peng and staff to help complete another project in Beverly Hills. This is a specialty fabricator capable of taking on small and large production order. State of the art metal shop offering many services to cater to your client and design needs. Modern equipment and highly skilled labor is a win, win. Finish work is of top priority specializing in laser cutting, break shapes, welding, powder coating to name a few. Pura vida :) http://www.aacladding.com/index-2.html

They are very precise with all measurements and are quick to give me my desired break shapes…read more Really recommend!!

I am thankful to have came across JPR welding. From first interaction to the very end Jose stood…read moreby excellent quality service and workmanship, Very honest and reliable gentleman. You can count on JPR Welding for any size project from small to big whether you need for a commercial buisness or for your own home/property. Jpr can accomplish for you. I promise you won't be disappointed!! Great value very reasonable fair cost. Just give a call and let them take care of your buisness/home your in great hands with Jose and his team.

My Iron Gate needed repair and they responded and resolved…read moreit as they said with a fair quote . I recommend them. thank yoU so MuCH !