Raymond Diaz, from ALLDIAZ WELDING has been fixing our 4X4 POLARIS and he is very KNOWLEDGEABLE,…read morepersonable, reliable, does what he says, and we are EXTREMELY happy with his work and OUTCOME!

Raymond was very responsive and delivered quality work as promised ahead of schedule.read more

Called Joe and told them my problem with out pontoon. We needed to frabricate a section in the back…read morecorner strong enough to support our new bimini top. Joe came by the house, took a look, measured and gave me a price. Couple days later he said to bring the boat by his shop and he and his guys fabricated and welded the aluminum section in the pontoon It came out great and we are very happy with the work!

Pulled the rear mudflap off of my motorhome on the pavement while pulling out of a gas station…read more The top metal strip got bent, and the rubber had been pulled through by the connecting bolts. Took the mudflap on Thursday morning to John (owner) and he said they would make two steel pieces and sandwich the flap between the two, and paint and reassemble the flap. He said they could have it ready by tomorrow (Friday), but I said I would pick it up on Saturday instead. We agreed on a price between $75 and $100. He wrote my name and phone number on a clipboard, On Saturday, I returned to the shop, and John didn't recognize me. I stated I was there to pickup the mudflap. I noticed the mudflap hadn't been touched, it was laying on the floor. His reply was that he just got the material yesterday (Friday). I asked him when it would be done, and his reply was Monday. I told him I would be back on Monday around noon. On Monday around noon, I returned to the shop to find that the two steel plates had been made and painted but the mudflap was not mounted on the steel pieces and it was not ready to go. His excuse was that he had decided that the connecting chain and bolts should be stainless steel and that there would be an additional charge for $80 for hardware. I protested, this is a mudflap, I don't care about stainless steel, I want the original hardware because the length is very important for me to reinstall the flap at the proper height. I asked how much longer to get it put together and he said he would have it done in a couple of hours. I returned to the shop at 3:00 pm and found the mudflap done, or at least I thought it was. He apologized for the delay and said he would take $80 instead of the $100. I gave him $80, and explained to him that he could have called me, and he stated that he did't have a phone number for me, I showed him the clipboard that had the number on it. After getting the mudflap home to reinstall, I found that he had removed two of the stainless steel lettering bolts, and two of the existing bolts that he said he had to cutoff had been replaced with a bolt with a shank on it instead of a full thread as required to bolt it back onto the motorhome. Four of the mounting nuts were also missing. The quality of the work was OK, but not rocket science.

I went to this guy on a Saturday and everyone else was closed my jet ski trailer was falling apart…read morefrom rust and I had no way of getting home. Called up this guy and he comes gives me an estimate and two hours later and some steel plates ..... HE GOT ER DUN!

From the owner: Serving Bullhead City and surrounding areas Free estimates Quality Auto and Home Repair Heating &…read moreA/C Swamp Cooler Rebuilds Welding Hauling Business Cleanups. No Job too small. Reasonable. Call Handy Rich. He will git er' dun!

I rarely write reviews, either positive or negative. However, in this case, I feel that the company…read moreand the man needs to be recognized! I have a stove that has 2 Wrought Iron grates over the burners. One of the grates had cracked and the other was broken into 3 pieces. I took this to J & M Wrought Iron just to find out if #1, they could be fixed and #2, would they do this tiny job and repair! I spoke with Joe, who I believe is the owner and boss about this. It took a little time, again, a tiny no profit job compared to what they normally do, but Joe was able to weld these grates back together! If I had to re buy these grates, it would have cost $200.00+. Joe let me know that they were ready to be picked up. I asked him how much it was or would cost. Joe said "don't worry about it!" When I shortly to pick these grates up, I will be taking a couple of pepperoni pizzas with me. Thank you J & M Wrought Iron, and to you also Joe! G.S.

Go elsewhere. Unless your a Hotel or need $$$$$$ worth of iron work . They do NOT have time for…read moreyou. They will on the other hand string you along for 3 months and more and finally give you even more excuses for why the job isn't done yet . Very bad handling of a business

This was my first time ever having anything 3D printed. The finished product works and looks great,…read moreidentical to the original item made of brass...I very much prefer this material! Quick, easy and very affordable process. My mind is busy thinking of other neat items to possibly 3D print. SO COOL!!!

I needed a part printed, Mike was super-responsive, asked a bunch of questions, and did a great job…read morefor a very reasonable price. I am very happy with the whole experience and the part that he printed is exactly what I wanted.

SEM Dirt... coming in clutch!! If you've got an off-road rig & need anything repaired... SEM…read moreDirt for the win!! While on a roadtrip, I had a mechanical issue that needed resolving. I needed a shop that understood the dynamics of off-road parts & their compatibility with my Toyota 4Runner. A quick Google search popped up SEM Dirt, and after a quick phone call with Sean I was relieved to know I could stop by & get my winch & it's wiring repaired ASAP, same day! Huuuuuge thanks to SEM Dirt for helping me out so quickly, and with a cost effective solution. Easily could have cost 3x as much, but the bill was way under budget & made me eager to rep some SEM Dirt gear.

Excellent work on my 2nd gen tacoma. Replaced the drivers side axel. Highly recommend,…read more professional work and fair pricing. A++

I brought miles a complicated project and he was able to get right on it and work with me to get it…read moredone. I am very happy with the services, completed project and the price and I would definitely recommend him, for your welding and fabrication needs

I contacted Miles to build a gate for my courtyard. He was on time for the appointment. We agreed…read moreon a design and price. The gate was completed on time and exceeded my expectations and I have high standards. Miles was professional to work with, did an incredible job. It was great working with someone who has amazing talent, but just as important, knows how to run a business and is honest. I definitely recommend Miles of Steel for any metal work. He is prompt, courteous, professional and reasonable.

Don't waste your time with the big fancy atv dealers.These guys know their stuff don't try to…read moreoversell and charges a way fair price.ive tried and been burned by the rest in my eyes these guys are the best.

Frank is very fair and knowledgeable. Great run business. Very rare nowadays to receive a call back…read morebut they communicate very well with the customer.